TYEMUI ZG-T27 Multifunctional Electric Hot Pot User Manual
- June 16, 2024
- TYEMUI
Table of Contents
TYEMUI ZG-T27 Multifunctional Electric Hot Pot User Manual
Please read this manual carefully before use and keep it properly. If there is any conflict between the content and the actual product, please refer to the actual product.
Product Parameters
Produce Standards: GB4706.1-2005. GB 4706.19-2008
Product| Model| Power| Voltage| Frequency|
Capacity
---|---|---|---|---|---
Electric HotPot| ZG-T27| 700W| 110V~120V| 50Hz~60Hz| 1.6L
Instructions
There are 3 gears on the switch of this item
- When the switch is in position “0”, the indicator light goes out, and the product is powered off
- When the switch is in position “I”, the indicator light is on, and the product heats with low power
- When the switch is in position “II”, the indicator light is on, and the product heats with high power
Function
Boil Water
- Take off the glass lid, add an appropriate amount of water, and then close the glass cover. (Adding water should not exceed the maximum amount of water)
- Insert the power plug into the power supply, turn the switch to “I, the indicator light will be on, and the product will start to heat.
- When the water starts to boil, turn the switch to “0”, the indicator light will go out, and the product will stop heating.
Note: If water is about to overflow during cooking, please open the lid and turn the switch to “0”.
Fry Steak
- Take off the glass lid and add some butter. (There should be no water in the pot at this time)
- Insert the power plug into the power supply, turn the switch to “II”, the indicator light will be on, and the product will start to heat.
- When the oil temperature rises, put the steak into the pot and turn it over in due course. Add your favorite spices when the steak is about to reach the desired doneness. After the steak is fried, turn the switch to “0” and turn off the power. Note: If you see that it is about to burn during cooking, please turn t he switch to “I” or “0”.
Safety Precautions
lndicates [prohibited] content
- During the working process, please do not put your hands or face close to the steam outlet to avoid burns.
- During the working process, please do not cover the steam port with cloth, etc., so as not to cause accidents or cause damage to the multi-functional pot.
- Do not modify: Except for maintenance technicians, other people are not allowed to disassemble and repair, so as not to cause fire, electric shock and injury.
- Do not use voltage more than AC 120V, so as not to cause fire and electric shock. Do not use if the power cord is damaged.
- Do not operate in the following ways, so as not to cause fire and electric shock due to damage to the power cord: the power cord is forcibly bent, close to high temperature, bundled, loaded with heavy objects, etc.
- Do not use the plug of the power cord if it is damaged, so as not to cause fire, electric shock or short circuit.
- Do not unplug the plug with wet hands to avoid electric shock and injury.
- During the working process, it is forbidden to move or shake the electric cooking pot.
- Do not let children operate it alone, and keep it out of reach of infants and young children to avoid dangerous accidents such as electric shock and burns.
- Do not place the product in an unstable, damp place or near other sources of fire or heat, otherwise it may be damaged or an accident may occur.
- Do not insert pins, wires or other objects into the drain hole at the bottom of the multi-function pot to avoid electric shock.
- During use or just after use, please do not touch the inside of the pot with your hands directly to avoid high temperature burns.
Indicates the content of [compulsory]
- This product is limited to indoor use.
- The appliance must not be immersed in water or sprayed with water.
- If there is dust or water on the power cord plug, socket and product socket, please clean it in time to avoid fire, electric shock or short circuit.
- The plug needs to be fully inserted into the socket to avoid fire, electric shock and short circuit.
- If the power cord is damaged, it must be replaced with a qualified power cord or special parts purchased from regular stores.
[Caution] Matters that may cause minor injury or property damage
- Improper maintenance or unauthorized disconnection of some important components such as fuses may invalidate the product protection, resulting in overheating or fire.
Indicates the content of [Reminder]
- If the product picture is inconsistent with the actual product, the actual product shall prevail.
- There is a slight ticking or hoarse sound during the use of the product, which is the normal sound of the product, please do not panic.
- The altitude range for normal operation of the product is 0-2000 meters.
- Please keep the manual well for future reference during use.
Cleaning and Maintenance
The power plug must be unplugged before each cleaning. Wash the pan after it has cooled down.
Wipe clean with a dry cloth after each use.
When cleaning the product, it is strictly forbidden to soak the pot, power cord, power plug and power base in water.
Clean the inner tank with detergent, sponge, rag, etc. Do not use hard steel wire or hard scouring pads to clean, so as not to damage the non-stick coating on the surface.
The exterior of this product is dirty and can be wiped with a damp cloth. Do not use products such as scouring powders, cleaning creams, etc., as they will damage the gloss of the exterior of the multi-cooker.
Material Information Sheet for Food Contact
The food contact materials and parts of this product meet the requirements of GB4806.1-2006 and the corresponding national food safety standards. The specific information is as follows
Parts| Material| Standards
Liner Coating| PTFE| GB4806.10-2016
Glass Lid| Tempered Glass| GB4806.5-2016
Sealing Ring| Silicone| GB4806.11-2016
Screws Washers| Stainless Steel| GB4806.9-2016
Pot Liner| Stainless Steel| GB4806.9-2016
Steamer(optional)| pp| GB4806.7-2016
Note: This series of products contains the above food contact materials,
some models may not contain individual materials, please refer to the actual
product
After-Sales Service
If you encounter any issues, please don’t hesitate to contact our support team.
Reach us via email at wedocare4u@hotmail.com. We are committed to providing prompt assistance and request the following information to expedite the troubleshooting process:
- Platform of purchase.
- Purchase order number.
- Video or pictures illustrating the problem.
As a brand dedicated to solving everyday challenges, we greatly appreciate your feedback on your experience with our product.
Share your thoughts on Amazon: www.amazon.com/ryp
Or contact us via email: wedocare4du@hotmail.com Thank you once again for your purchase.