SIGMA 021010 Duo Magnetless Speed User Guide

June 6, 2024
SIGMA

SIGMA logo m1

DUO

MAGNETLESS
CADENCE

ZUBEHÖR /ACCESORIES

DUO MAGNETLESS SPEED
Art.-Nr. 021010

O-RINGS
Art.-Nr. 090022

sigmasport.com

SIGMA-ELEKTRO GmbH
Dr.-Julius-Leber-Straße 15
67433 Neustadt, Germany

000000/1

(1)

(2)

SIGMA 021010 - Step 2

Remove sticker.

(3)

SIGMA 021010 - Step 3

(4)

(5)

Blue light flashes.

SIGMA 021010 - Step 5 - 1

SIGMA 021010 - Step 5 - 2

Industry Canada Statement

This device complies with Industry Canada licence-exempt RSS standard. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0.5 cm between the radiator and your body.

Battery type CR 2032 x 3 V
Operation temperature -20 °C to 60 °C
Operation frequency ANT+ 2.4 GHz @ 1 dBm nominal

Bluetooth 2.4 GHz @ 1 dBm nominal
Transmission power| 0~4 dBm
Water rating| IPX7

CE Statement

You can find the CE declaration at: ce.sigmasport.com/duomagnetlesscadence

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate this equipment. (Example – use only shielded interface cables when connecting to computer or peripheral devices).

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

SIGMA logo m1

DUO

MAGNETLESS
SPEED

ZUBEHÖR /ACCESORIES

DUO MAGNETLESS CADENCE
Art.-Nr. 021011

O-RINGS
Art.-Nr. 090022

sigmasport.com

SIGMA-ELEKTRO GmbH
Dr.-Julius-Leber-Straße 15
67433 Neustadt, Germany

000000/1

(1)

(2)

SIGMA 021010 - Step 2

Remove sticker.

(3)

SIGMA 021010 - Step 3

(4)

(5)

Blue light flashes.

The SPEED sensor can be mounted on the bicycle hub of both wheels and will be activated through movement.

SIGMA 021010 - SPEED sensor

Industry Canada Statement

This device complies with Industry Canada licence-exempt RSS standard. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0.5 cm between the radiator and your body.

Battery type CR 2032 x 3 V
Operation temperature -20 °C to 60 °C
Operation frequency ANT+ 2.4 GHz @ 1 dBm nominal

Bluetooth 2.4 GHz @ 1 dBm nominal
Transmission power| 0~4 dBm
Water rating| IPX7

CE Statement

You can find the CE declaration at: ce.sigmasport.com/duomagnetlessspeed

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate this equipment. (Example – use only shielded interface cables when connecting to computer or peripheral devices).

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals