Aihand PW302 Cordless Pressure Washer User Manual
- June 15, 2024
- Aihand
Table of Contents
- Cordless Power Washer
- Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Cordless Power Washer
Model: PW302
User Manual
Thanks for choosing the Aihand Cordless Power Washer. Please carefully read the user manual and related warnings before using the product. If you have any questions during usage, please feel free to contact us.
Customer Service:[email protected]
Official Website:www.aihandstore.com
Whats App: +86 19128451839
Aihand
WhatsApp contact
NOTE:
If there is water in the machine, please don’t get upset. The product is not
second-hand. In order to ensure that you receive a product that is in perfect
condition, each of our products undergoes a pumping test before leaving the
factory.
About Warranty
Dear Customer:
Thanks for you put trust in Aihand.
Aihand is a skilled designer and experienced producer who specializes in Portable Power & Outdoor items. This washer is suitable for outdoor car washing, watering green plants, cleaning walls, floors, etc. It can also be used for cleaning indoors.
Good Service and one-year general Worry-free Warranty for quality-related issues is our promise, under our warranty, you can return any product (Non- human damage) within one month of purchase for a refund or a replacement of the product (Shipping fee/ Import duties/ Taxes/ Charges are not included). Please feel free to contact us about the issue. Our support team will get back to you within 24 hours.
Do you want to become Aihand All, update your general warranty (1 year) to 2 years’ warranty?
Please message us:
We are glad to provide you with sincere service.
Best regards,
Aihand Customer Service
Specifications
| Motor Type | Brushless Motor |
|---|---|
| Max.low | 5L/min |
| Battery Voltage | 21V 4.0Ah |
| Battery Runtime | 45 mins |
| Charge Time | 5-6 hrs |
| Pressure | 652 PSI |
| High Pressure Hose Length | 16.5 FT |
| Max Water Inlet Temperature | 0°C-40°C |
| Net Weight | 2.5 lbs(Battery included) |
| Spray Nozzle | 6-IN-1/Universal |
| Max.low | 250L/H |
Packing List and Display Diagram
Packing List
(1) Pressure Washer
|
(2) 6-IN-1 Nozzle
|
(3) Universal Nozzle
---|---|---
(4) Foam Cannon
|
(5) Water Hose
(6) Water Filter
|
(7) Battery
|
(8) Charger
(9) Extension Pole
|
(10) Storage Bag
When unpacking, make sure all the parts shown in Amazon.com are included. If
any parts are missing or broken, please contact us via email shown on the
cover of this manual as soon as possible.
Then take out the product and accessories, install and use according to the
operation procedure.
NOTE:
Before loading the package after use, please make sure that there is no
residual moisture in the pressure washer. Residual water may damage the
battery.
Display Diagram
Operation Steps
STEP1 : Installation/Removal of Intake Hose
Installation
(1) Pull the ring from the intake hose and aim it at the body slot.
(2) Make sure that the water inlet hose is connected with the water inlet without any gap, and loosen the pull ring of the water inlet connector. And the water inlet installation is completed.
Removal
(1) Pull down the pull ring of the water inlet fitting to complete the hose
removal.
STEP2: Filter Connected to Water Source
(1) Put the fitter on the other end of the inlet hose into water source.
(Note: Dip the water inlet hose connector with a small amount of water. A
small amount of water can be dipped in the inlet hose connector to reduce
friction and make installation more convenient. Shaking the filter
continuously in the water will remove the air from the water pipe.)
(2) The fitter must be completely immersed in water. If the fitter floats on the water surface, air will enter the water pipe and the machine cannot be used normally. And shaking the fitter continuously in the water will remove the air from the water pipe.
STEP3: Installation/Removal of Universal Nozzle
Installation
(1) First install the extension pole on the body.
(2) Press the universal nozzle directly into the slot at the front of the extension pole and rotate it.
(3) Installation of the universal nozzle is completed.
Removal
Turn the extension pole counterclockwise, pull the extension lever out of
the body with force, and then remove the universal nozzle from the extension
pole.
STEP4: Installation/Removal of 6-IN-1 Nozzle
Installation
(1) First install the extension pole on the pressure washer.
(2) Press the 6-IN-1 nozzle directly into the slot at the front of the extension pole and rotate it. Installation of the universal nozzle is completed.
(3) Installation of the 6-IN-1 nozzle is completed.
Removal
Turn the extension pole counterclockwise, pull the extension lever out of
the pressure washer. with force, and then remove the 6-IN-1 nozzle from the
extension pole.
STEP5: Installation/Removal of Foam Cannon
Installation
(1) Align the foam cannon with the front slot of the pressure washer’s
body, press it in and rotate it to complete the connection.
(2) The button can be rotated to adjust the the concentration of the foam tank. And the foam cannon installation is completed.
Removal
Turn the extension pole counterclockwise, pull the extension lever out of
the body with force, and then remove the foam cannon from the extension pole.
Tips: There should be a pressing action when removing, then rotate the foam cannon and extension lever simultaneously.
STEP6: Installation/Removal of Battery
(1) Installation: Align the battery with the slot at the bottom of the pressure washer, slide it in, and the battery is installed successfully.
(2) Removal: Press the button on the battery and push out the chute to remove it.
Product Usage
Press the
switch to immediately release water
Adjust the arrow direction to freely change the water type
Water Hose Holder
You can use this holder to fix the water hose on the bucket, which will be more convenient for you to use.
FAQ
| FAQ | Cause | Solution |
|---|---|---|
| Without water suction | Machine is too high above water | Holding the pressure |
washer below 1.5m from the ground
Filter is clogged with foreign matter| Remove the filter and clean
Failure of connection of Inlet pipe to machine or rupture of intake pipe|
Check and replace the water hose, or contact Aihand Customer Service for
replacing
Intake pipe bending| Straighten out inlet hose and reconnect
The pump froze because of the cold weather| Restart after thawing
Battery Failures| Insufficient battery charging time| The battery requires
close to 4-5 hours of charging time to be fully charged.
Battery runs out| Charge or replace new battery pack
Faulty battery charger| Replace the charger or contact Aihand Customer
Service.
Battery pack is broken| Contact Aihand Customer Service to replace the Makita
battery.
Sudden increase in effluent pressure or| The head of the water gun is blocked
by foreign matter| Use a needle to clear the nozzle or replace a new gun head
Machine no working| Battery pack not installed| Reinstallation
Battery runs out| Charge or replace new battery pack
Battery pack is broken| Contact Aihand Customer Service to replace the Makita
battery
Machine pressure discontinuity| Air in pump| Check that joints and hose are in
good
Machine in low voltage mode| Normal
Incorrect or broken nozzle.| Check or replace the nozzle.
Pressure washer stop working| Battery is dead| Charge or replace new battery
Gun head stocked| Clear the nozzle or replace the new gun head
Internal water leaking| Using chemical acid source or assembly cause| Avoid
using chemical water sources
Repair and Maintenance
(1)Before each use, please check whether the pressure washer and parts are damaged. If it is damaged, stop using the machine and contact Aihand Customer Service to replace the parts.
(2) Intake hose and fitter must be cleaned after use. The storage box can help to keep away oxidation.
(3) Do not use chemical acid or muddy water. Most use clean and pollution-free water.
(4)After using the pressure washer, it should run for a few seconds to drain the residual water in the machine to avoid oxidation or freezing due to weather, and store it in a dry cool place.
(5)Waste disposal: For damaged accessories and packaging materials, they must be sorted and recycled, and relevant labels must be made.
(6)Please don’t put the machine in the trunk of the car to avoid the high temperature causing the car to catch fifire.
Warning: Do not use chemical acid or muddy water. Must use clean and unpolluted water.
Instructions on Battery
Battery Pack Charging and Storage
(1) To help extend battery life and avoid charging immediately after a full
discharge, let the battery pack cool for a few minutes.
(2) Avoid using this product when the battery surface is hot. This helps it to run at a constant temperature and prolongs the working time and service life of the battery.
Battery Pack Safety Instructions
The battery is a sealed device, there is no safety hazard under normal
circumstances, in case the battery leaks, do not lack to touch the liquid, the
following precautions should be followed.
(1) Skin contact can cause irritation, please wash with soap and water.
(2) Inhalation can cause respiratory organ irritation, get fresh air, and seek medical advice.
(3) Eye contact can cause irritation, flush immediately and thoroughly with water eyes for at least 15 minutes and seek medical attention.
Batteries contain lithium. To protect the environment, discarded batteries should be sorted and recycled, and should not be thrown away at will!
Do not throw into water or close to fire sources.
Safety Instructions
Read the entire important safety information section before set up or use of this product:
(1) Make sure it is the original machine and accessories (charger and battery).
(2) When using, please do not direct the water to the crowd or other charged components.
(3) Keep children away from area where the battery is charged.
(4) Stop using the product if the battery pack or charger has been dropped, bumped or damp.
(5) Someone must be present when charging the battery.
(6) Be sure to use original battery pack (forbidden to use other charging accessories or charging methods without authorization or with the consent of the original manufacturer).
(7) Do not charge in high temperature or unattended environment.
NOTE:
When the pressure washer leaves the factory, the power-on pumping test will be
carried out, and there will be water residue in the pump, so when the products
are received and run, the pump may also have water ejection when it is not
connected to the water pipe, which is a normal phenomenon.
Email: [email protected]
The Power To Do More
Documents / Resources
|
Aihand PW302 Cordless Pressure
Washer
[pdf] User Manual
PW302 Cordless Pressure Washer, PW302, Cordless Pressure Washer, Pressure
Washer, Washer
---|---