BEOK TDR-83 Smart Thermostat for Temperature Control User Guide

June 6, 2024
BEOK

TDR-83 Smart Thermostat for Temperature Control
User Guide

BEOK TDR 83 Smart Thermostat for Temperature

View all BEOK thermostat manual

THIS THERMOSTAT IS SUITABLE FOR WATER HEATING, ELECTRIC HEATING, AND GAS BOILER

Welcome

Thank you for your trust and support. By adopting higher-end technology and more perfect technology, your new thermostat will provide you with the right temperature environment every day in the future, making your life more comfortable and your living environment more stylish and beautiful. For detailed instructions on the installation and use of this thermostat, please read this manual carefully. Please contact a professional to install the thermostat for you and install and use the product to the extent permitted by law

Application

An intelligent digital temperature controller is a floor heating system suitable for room temperature control and household temperature control. It controls the operating state of the floor heating equipment by comparing the ambient temperature with the set temperature, which improves comfort and achieves energy saving. This digital temperature controller adopts microcomputer control technology and is equipped with full-screen display touch buttons, which is elegant in design and easy to use. The thermostat has manual automatic, programmable, and state memory functions.

Product packaging

Thermostat host—————– 1 PC
Qualification certificate——- 1 PC
Sensing line (optional)——– 1 PC
Manual—————– 1 PC
Screw——————- 2PCS

Product Model

WP Plumbing 3A
EP Electric Heating 16A
WPB linkage, gas boiler 3A

User Notes

  1. Please read this manual carefully. Improper operation may damage the product or cause dangerous conditions.
  2. The installation personnel must be well-trained and experienced service technicians.
  3. After installation, please read this manual carefully and operate the product according to the instructions.
    Caution: Risk of electric shock or equipment damage.

Wiring Diagram

BEOK TDR 83 Smart Thermostat for Temperature - Wiring
Diagram

Note: WP for water heating; EP for electric heating; WPB for gas boiler

Installation procedure

This product is installed with a standard 86 control switch (in compliance with European regulations)

|
---|---
1. Slide the mounting plate upward in this direction| 2. Remove the mounting plate in this direction
BEOK TDR 83 Smart Thermostat for Temperature - Installation procedure
3|
3. Fix mounting plate to cassette with screw| 4. After installation, buckle the product in this direction

Description of display & Icon

BEOK TDR 83 Smart Thermostat for Temperature - Description of display &
Icon

Operating Instruction

  1. Power on/off: press to turn on/off the thermostat.
  2. Press the key to switch between manual and automatic modes.
  3. In the automatic mode, press or adjust the temperature to enter the automatic temporary mode. This model runs for only one session.
  4. Long press key and key to enter the clock setting, press key to switch Settings Item, press and keys to adjust the value of each parameter.
  5. Press and for 5 seconds to add or cancel the child lock.

Time programming instructions

Press and hold the key to enter the programming setting, short press the key to switch the option, press the key or key to adjust each option parameter, and press the key to exit and save.

KEY OPTION ICON TIME ADJUST DEFAULT ADJUST
workday 1 06:00

| 20 t|

2| | 08:00| 15 t
3| | 11:30| 15 °C
4| | 12:30| 15 t
5| | 17:00| 22 °C
6| | 22:00| 15°C
Holiday| 1| | 08:00| 22°C
2| | 23:00| 15°C

Advanced options

When POWER OFF, press the key and the key for 5 seconds to enter the advanced options setting.
Press to enter the next option, press and to adjust, and press to exit the height Level option.

1| Temperature compensation| The default value of the calibration room temperature is -2 °C. Press the up and down keys
to adjust. The adjustable range is 9.9 °C to -9.9 C.
---|---|---
2| Sensor selection| The temperature sensor is selected as IN by default. Press the up and down keys to adjust as
IN respectively, indicating that the internal.
3| Modify the temperature limit| The default temperature limit value is 35 °C. Press the up and down keys to adjust the range
from 5 °C to 60 °C.
4| Temperature difference start| The default temperature difference is set to 1 °C. Press the up and down keys to adjust the
range to 1-10 degrees.
5| Antifreeze function| Set the default anti-freeze function to OFF, display OFF, press the up key to turn on
anti-freeze and display ON
6| Holiday option and turn off weekly
programming|  Set the default rest day as double OFF. Press the up and down keys to adjust it to double
OFF (1-5), single OFF (1-6), no OFF (1 -7) and tum off week programming (OFF).
7| Primary and secondary reverse
selection| Set the default main and auxiliary reversal to 0. Press the up and down keys to adjust 0 to
tum off the main and auxiliary reversal. 01 means auxiliary reverse, 02 means auxiliary
reverse, 03 means main and auxiliary reverse, shutdown and antifreeze is not on, stop
output
8| Passive linkage output delay time 1| Set the default passive linkage delay time to 0. Press the up and down keys to adjust the
range of 0-5 minutes.
9| Set upper-temperature limit| The default value of the set temperature upper limit is 60 °C, and the adjustment range is
35-95 t by pressing the up and down keys.
10| Restore Factory Defaults| Set to restore the factory default setting to display “-“, Press the up button to adjust the
display “—“, press the enter button to restore the factory settings

BEOK TDR-83 Smart Thermostat User Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals