bewello BW2021 Electric Fireplace User Manual

Electric Fireplace
Heater + LED

USER MANUAL
Product Nr. BW2021

Dear Customer! Thank you for choosing our product, we hope you enjoy using it for a long time.
There is nothing better than to cuddle with our loved one in front of a fireplace on a cold winter day. This multifunctional fireplace is a perfect replica of the original fireplaces: it contains realistic, flaming effects and glowing, smoldering pieces of wood, but it can also be used as a heat source.A romantic atmosphere is guaranteed.On cold winter nights, you can adjust the intensity of the radiator (1750 W, 1950 W) at two power levels, which is suitable for occasional, intermittent heating of a room of up to 30 m². This way, not only the sight but also the feeling of warmth will be realistic. Precise temperature control is ensured by a built-in thermostat, which can be set using a rotary switch. The flame effect can be used independently of the heating function, so you can admire the magical atmosphere of a „burning fire” in the fireplace at any time of the year.

• Safe operation
• No fire, sparks or soot
• It is characterized by two heating capacities and high heating power • Overheating protection
• Rugged frame
• Stable legs
• The light effect can be switched separately
• Romantic atmosphere from the first minute of switching on
• It is deceptively similar to real fireplaces

Attention! Some points on the cover may become hot due to heat radiation!

USER MANUAL

SAFETY REGULATIONS, WARNINGS
DANGER
General advice: Danger of suffocation! Please keep the packaging of the appliance out of the reach of children as it may lead to suffocation. The appliance may only be used by adults, the storage location must be chosen in such a way that children cannot accidentally access it. Children should be supervised to ensure that they do not play with the appliance.
Danger of electric shock: Never operate the appliance with wet, wet hands! Touching the device, including the power plug and cable, with wet hands is strictly prohibited! The device may only be connected to AC power with the correct voltage. Do not point the device directly at electrical equipment, as hot air may enter and cause damage. Do not use the appliance near a bathtub, shower, swimming pool or sink containing water. Unplug the appliance only by grabbing the mains plug.
Operation:
Make sure of environmental regulations before use! Do not use the device near explosive material! When used in special places (eg petrol station, pools…) the local safety regulations must be followed! Place the appliance horizontally and stably, make sure that the appliance does not tilt or tip over! Do not cover the appliance with anything (sheets, blankets…)! To reduce the risk of fire, do not place the appliance closer than 2 m to furniture, objects or walls! The appliance must not be operated from a socket with a timer! The appliance is not suitable as a primary heating source for rooms. The appliance is designed for intermittent (short-term) heating.
WARNING
General advice: The device may only be used for its intended purpose! When using, pay attention to the physical safety and safety of those around you (especially children). The device may only be used by persons who have read, understood and are able to operate this device accordingly! Persons with reduced mental, physical or sensory capabilities should not use the device! Children should not use the appliance! After using the appliance, make sure that the hot appliance can cool down in a well-ventilated place in a way they won’t cause personal injury to anyone! Inform those around you about the operating status of the device.
Risk of electric shock:
Only connect the appliance to a mains socket that is safe to operate or has been installed by a specialist in accordance with IEC 60364-1. Before each use, make sure that the appliance and the mains cable and connectors are intact! Only use undamaged devices! If you experience any damage, do not use the appliance, contact a specialist! During use, pay attention to the integrity of the mains cable, avoid edges or objects that can damage the surface of the cable. Avoid the use of extension cords or splitters, as they are a source of danger during operation. Always unplug the appliance when not in use! Maintenance work must only be carried out with the mains plug removed!
Operation: Risk of burns! Never touch the part of the radiator (bottom) or point it at close range to other people or animals! To avoid burns, always allow the appliance to cool down before you touch it! The device may only be operated when fully assembled with the factory accessoriesIf any part is damaged, it must be replaced before use. Allow the appliance to cool down completely in a wellventilated place before storing itDuring use, periodically check that the appliance is not overheated and that the ventilation openings are not blocked.
CAUTION
General advice: Do not use the device if you have previously dropped or struck it and it is visibly damaged! It is strictly forbidden to, modify or disable safety devices, you must use as intended!
Operation: Always operate and store the device as described always check the integrity of the appliance, cable, plug and accessories In the event of damage, do not use the device!
ATTENTION
Operation : Use the appliance only at freezing temperatures above 0 °C to avoid condensation and electric shock. Never leave the appliance unattended when it is connected to the mains! Protect the device from moisture and water! Do not store the device outdoors in high temperature fluctuations. ATTENTION!
Certain parts of the product may become hot and cause burns. Requires increased attention near children.

SPECIAL REQUIREMENTS

ATTENTION!
The radiator does not include a device to control the temperature of the rooms. Do not use it unattended in a room with people who cannot leave.
ATTENTION!
Leave 50 cm free space above the radiator and 200 cm in front of the radiator. Never use the radiator in a room with flammable, explosive oil, gasoline or gas.

INSTALLATION

Leg assembly:
The radiator is easy to assemble, all you need to do is install the legs. Use a screwdriver for assembly. Secure each foot with 3 screws for safe use. The package may also include spare screws, which you should keep at the end of the installation.

HOW TO USE THE DEVICE

1. Place the appliance on a horizontal, level and stable surface.

2. Before use, make sure that the thermostat is turned counterclockwise to the stop (thick part) and that the on / off button is in the “O” (off) position

3. Plug in the device.

4. Turn on one of the power levels:
   • “I” – Weak heat radiation (950 W)
   • “II” – Weak heat radiation (1950 W)

5. Turn the thermostat clockwise until you hear a click.

6. If you want to increase, turn the temperature clockwise, if you want to decrease, turn it counterclockwise.
   I mportant : If you turn a lot in reverse, the device will turn off with one click.

7. To switch off the appliance, turn the thermostat counterclockwise to the stop and turn the on / off switch to the „O” (off) position.

8. Unplug the device.

Overheating protection: If the device overheats for some reason, it will turn off automatically. Remove any objects that caused overheating. Once the appliance has cooled down, it will switch on again.
Cleaning: Always switch off, unplug and let the appliance cool down before cleaning. Use a dry cloth or vacuum cleaner to remove dust The housing should only be wiped with a slightly damp cloth, making sure that no moisture enters the device! Do not use chemicals or alcohol during cleaning!
Storing:
Store in a cool, dry place. Do not throw away the product box.
You can use it to store the device when not in use. Caution Only put the appliance back in its box if it has cooled down properly.
Proper disposal of the appliance (Electrical appliance): (It is valid in the European Union and in all other European states that participate in selective collection) According to Directive 2012/19 / EU, electrical waste and appliances must not be disposed of with household waste. Old appliances should be placed at a collection area to maximize the recycling of raw materials, thus reducing their impact on human health and the environment. The crossed-out wheeled bin symbol is attached to all products it requires to be collected separately. Consumers should contact their local authorities for more information.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>