bewello BW2022 Electric Wall Fireplace User Manual
- June 6, 2024
- bewello
Table of Contents
Electric Wall Fireplace
Heater + LED
USER MANUAL
Product Nr. BW2022
Dear Customer! Thank you for choosing our product, we hope you enjoy using
it for a long time.
There is nothing better than to cuddle with our loved one in front of the
fireplace on a cold winter day. This multifunctional wall-mounted fireplace is
the perfect replica of the original fireplaces: it contains realistic, flaming
effects and glowing, smoldering pieces of wood, but it can also be used as a
radiator. It can be easily mounted to any wall with dowels and screws. A
romantic atmosphere is guaranteed. On cold winter nights, you can adjust the
intensity of the radiator (950 W, 2000 W) at two power levels on request,
which is suitable for occasional, intermittent heating of a room of up to 30
m². This way, not only the sight but also the feeling of warmth will be
realistic. Precise temperature control is ensured by a built-in thermostat,
which can be set using the accessory’s remote control. The flame effect can be
used independently of the heating function, so you can admire the magical
atmosphere of a „burning fire” in the fireplace at any time of the year.
| • It can be operated safely | • Rugged frame |
|---|---|
| • There is no fire, spark, soot | • Strong wall bracket |
| • It is characterized by two heating capacities and high heating power | • The |
light effect can be switched separately, adjustable brightness
• Weekly timing| • Romantic atmosphere from the first minute of switching on
• Overheating protection| • It is deceptively similar to real fireplaces
Attention! Some points on the cover may become hot due to heat radiation!
| Design: | Wall | Inbuilt temperature adjustment: | Yes, manual |
|---|---|---|---|
| Power supply: | AC 220 – 240 V, ~ 50/60 Hz | Protection: | IP20 |
| LED efficiency: | 1.6 W | Overheating protection: | Yes |
| Heating efficiency: | 950 – 2000 W | Noise level: | 50 dB |
| Recommended use: | max. 30 m² room | Power cord: | 140 cm |
| Operationg temperature: | 15 °C – 30 °C | Material: | Metal + glass |
| Storing temperature: | 15 °C – 30 °C | Size: | 88 x 56 x 15 cm |
| Direct heat efficiency: | 950 – 2000 W | Color: | Black |
| Energy class (EU2021): | Class „G” |
USER MANUAL
SAFETY REGULATIONS, WARNINGS
DANGER
General advice: Danger of suffocation! Please keep the packaging of the
appliance out of the reach of children as it may lead to suffocation. The
appliance may only be used by adults, the storage location must be chosen in
such a way that children cannot accidentally access it. Children should be
supervised to ensure that they do not play with the appliance.
Danger of electric shock: Never operate the appliance with wet, wet
hands! Touching the device, including the power plug and cable, with wet hands
is strictly prohibited! The device may only be connected to AC power with the
correct voltage. Do not point the device directly at electrical equipment, as
hot air may enter and cause damage. Do not use the appliance near a bathtub,
shower, swimming pool or sink containing water. Unplug the appliance only by
grabbing the mains plug.
Operation: Make sure of environmental regulations before use! Do not use
the device near explosive material! When used in special places (eg petrol
station, pools…) the local safety regulations must be followed! Place the
appliance horizontally and stably, make sure that the appliance does not tilt
or tip over! Do not cover the appliance with anything (sheets, blankets…)! To
reduce the risk of fire, do not place the appliance closer than 2 m to
furniture, objects or walls! The appliance must not be operated from a socket
with a timer!
The appliance is not suitable as a primary heating source for rooms. The
appliance is designed for intermittent (short-term) heating.
WARNING
General advice: The device may only be used for its intended purpose!
When using, pay attention to the physical safety and safety of those around
you (especially children). The device may only be used by persons who have
read, understood, and are able to operate this device accordingly! Persons
with reduced mental, physical or sensory capabilities should not use the
device! Children should not use the appliance! After using the appliance, make
sure that the hot appliance can cool down in a well-ventilated place in a way
they won’t cause personal injury to anyone! Inform those around you about the
operating status of the device.
Risk of electric shock: Only connect the appliance to a mains socket that
is safe to operate or has been installed by a specialist in accordance with
IEC 60364-1. Before each use, make sure that the appliance and the mains cable
and connectors are intact! Only use undamaged devices! If you experience any
damage, do not use the appliance, contact a specialist! During use, pay
attention to the integrity of the mains cable, avoid edges or objects that can
damage the surface of the cable. Avoid the use of extension cords or
splitters, as they are a source of danger during operation. Always unplug the
appliance when not in use! Maintenance work must only be carried out with the
mains plug removed!
Operation: Risk of burns! Never touch the part of the radiator (bottom)
or point it at close range to other people or animals! To avoid burns, always
allow the appliance to cool down before you touch it! The device may only be
operated when fully assembled with the factory accessories if any part is
damaged, it must be replaced before use. Allow the appliance to cool down
completely in a well-ventilated place before storing it. During use,
periodically check that the appliance is not overheated and that the
ventilation openings are not blocked.
CAUTION
General advice: Do not use the device if you have previously dropped or
struck it and it is visibly damaged! It is strictly forbidden to, modify or
disable safety devices, you must use as intended!
Operation: Always operate and store the device as described always check
the integrity of the appliance, cable, plug and accessories In
the event of damage, do not use the device!
ATTENTION
Operation: Use the appliance only at freezing temperatures above 0 °C to avoid
condensation and electric shock. Never leave the appliance unattended when it
is connected to the mains! Protect the device from moisture and water! Do not
store the device outdoors in high-temperature fluctuations.
Attention!
Certain parts of the product may become hot and cause burns. Requires
increased attention near children.
SPECIAL REQUIREMENTS
ATTENTION!
The radiator does not include a device to control the temperature of the
rooms. Do not use it unattended in a room with people who cannot leave. Leave
100 cm free space above the radiator and 200 cm in front of the radiator.
Never use the radiator in a room with flammable, explosive oil, gasoline or
gas.
INSTALLATION INSTRUCTIONS
Install the appliance at least 30 cm high on the wall, so that the distance between the ceiling and the appliance is at least 100 cm. We recommend placing the lower part of the appliance at a height of 60 cm from the ground to ensure the best visual experience in the fireplace flag fire. A safe installation requires at least two people!
INSTALLATION
The included mounting accessories provide mounting on brick, concrete, silicate walls. When mounted on a plasterboard wall, it can only be installed on a horizontal support structure prior to installation, make sure that the wall section has the correct load capacity and can provide the power supply for the device in the given location. When attaching to drywall, use a special drywall dowel, not the one included in the package! When fixing to a wooden surface, it is not necessary to pre-drill the holes and use dowels for the screws!
-
Remove the two screws that secure the bracket to the back of the device, and then remove the bracket from the device.
-
Using a spirit level and a pencil, draw a horizontal line on the wall at the desired height.
-
Place the bracket part on the wall and mark the location of the mounting holes on the line on the wall
-
Use a drill to drill the holes securing the bracket. Use an 8 mm drill bit for drilling. The depth of the holes must be at least 26 mm deep. Do not use a smaller mounting size!
-
Insert the supplied dowels into the holes until they are aligned with the plane of the wall.
-
Secure the bracket to the wall with the 4 screws!
-
Place the fireplace on the support structure and make sure that it fits stably and precisely.
-
Mark the location of the L-shaped console in the middle of the bottom of the fireplace. Pay attention to the height and position of the holes. (We recommend that the “L” shaped iron stem be facing up on the wall so that the fireplace will cover it)
-
Remove the fireplace from the upper cantilever rail and then drill the lower “L” shaped iron into the wall.
-
Place the fireplace back on the top rail and secure the accessory from below with two screws.
-
Before connecting to the network, make sure that all switches are off.
HOW TO USE THE DEVICE
There are two ways to control the fireplace:
- Using the touch surface on the fireplace
- Accessory with remote control
CONTROL OF THE FIREPLACE
When controlling the fireplace, please note that it takes a few seconds for
the control unit to receive the given instruction and process it.
Turn on fireplace: By pressing the button, the fireplace switches on and
the heating starts automatically. You can set the functions you need. Pressing
the button again turns off the fireplace.
Set the exact time: You can set the real time by pressing the button. Day
(Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday), hours and
minutes.
Brightness setting: By pressing the button. By pressing the button, the
fireplace is brighter and has more brightness. You can reduce the brightness
by 4 levels by pressing the button.
Setting the heat output: Press the button once to select the low heating
level. Press twice in succession to set the high temperature. If you press the
button again, the fireplace heating will stop and the fan will start 10
seconds after the heating is stopped Temperature control is possible on the
remote control.
CONTROL BY REMOTE
Remove the foil from the battery compartment of the remote control, and the remote control will be ready for use.
Use the same buttons you found on the fireplace control. The remote control is using infrared technology, so point the remote control at the fireplace you want to control. The infrared signal works from a maximum distance of 4-5 meters, make sure that no objects or people get between you and the fireplace during the control.
Timer set up ont he remote: After pressing the button, press the button
to chose ON/OFF. This allows you to change the timing of switching on or off
at a given time. Please do not set the timer for a period when you cannot
monitor its operation! After commissioning, check that all timers are off.
Temperature adjustment: You can also set the temperature on the remote.
Press the heating button (once or twice depending on the desired power level),
then adjust the temperature in the range of 15 to 30 degrees Celsius using the
“+” and “-” buttons.
Overheating protection: If the device overheats for some reason, it will
turn off automatically. Remove any objects that have caused overheating. To
safely restart the fireplace, turn off the power for 15 minutes. Once the
appliance has cooled down, it will switch on again.
Cleaning: Always switch off, unplug and let the appliance cool down
before cleaning. Use a dry cloth or vacuum cleaner to remove dust
The housing should only be wiped with a slightly damp cloth, making sure that
no moisture enters the device! Do not use chemicals or
alcohol during cleaning!
Storing:
Store in a cool, dry place. Do not throw away the product box.
You can use it to store the device when not in use. Caution Only put the
appliance back in its box if it has cooled down properly.
MALFUNCTIONS
| Reason | Solution |
|---|---|
| Does not work/fan does not rotate. | Check the safety shutdown mode. (The unit |
has overheated or
shut down for some reason.
The following icon is displayed on the device
stopped:| The device is working properly. It’s been sensed that the air in the
room had cooled by 5-10 degrees. For economical use, make sure that one of the
doors and windows is not open.
The flame effect does not work.| Check the LEDs, restart the device
Remote control does not work.| Check the polarity of the battery and whether
it needs to be
replaced. It may be too far from the fireplace or some landmark may be in the
way of the signal.
Proper disposal of the appliance (Electrical appliance): (It is valid in
the European Union and in all other European states that participate in
selective collection) According to Directive 2012/19 / EU, electrical waste
and appliances must not be disposed of with household waste. Old appliances
should be placed at a collection area to maximize the recycling of raw
materials, thus reducing their impact on human health and the environment. The
crossed-out wheeled bin symbol is attached to all products it requires to be
collected
separately. Consumers should contact their local authorities for more
information.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>