dji Mavic 2 Enterprise Compact Commercial Drone with Thermal and Zoom Dual-Camera User Guide

DJI Mavic 2 Enterprise Compact Commercial Drone with Thermal and Zoom

Dual-Camera

Aircraft

The DJITM MAVICTM 2 Enterprise Advanced features omnidirectional Vision Systems and Infrared Sensing Systems*and comes with a fully stabilized 3-axis gimbal camera with a thermal camera and a visual camera, providing both infrared and visual images simultaneously. DJI’s Obstacle Sensing technology helps users to fly and capture complex shots while AirSense provides awareness of the surrounding airspace and password protection ensures access to the aircraft and all data is secure. The Mavic 2 Enterprise Advanced supports up to 32× digital zoom and has a smoother thermal imaging sensor with a significantly higher resolution as well as a higher pixel visual sensor. The aircraft boasts a maximum flight speed of 44.7 mph (72 kph) and a maximum flight time** of 31 minutes.

1.  Gimbal and Camera
2.  Thermal Camera
3.  Visual Camera
4.  Forward Vision System
5.  Downward Vision System
6.  Lateral Vision System
7.  Downward Infrared Sensing System
8.  Auxiliary Bottom Light
9.  MicroSD Card Slot
10.  Front LEDs
11.  Motors
12.  Propellers
13.  Antennas
14.  Aircraft Status Indicator
15.  Upward Infrared Sensing System
16.  Backward Vision System
17.  Intelligent Flight Battery
18.  Battery Level LEDs
19.  Power Button
20.  Battery Buckles
21.  USB-C Port
22.  Link Button/Linking Status Indicator
23.  Extended Port (to connect accessories)
24.  Extended Port Cover

• The Vision Systems and Infrared Sensing Systems are affected by surrounding conditions. Read the Disclaimer and Safety Guidelines and User Manual to learn more. http://www.dji.com/mavic-2-enterpise- advanced
• Maximum flight time was tested in an environment with no wind while flying at a consistent 15.5 mph (25 kph).  This value is for reference only.

DJI Smart Controller

The DJI Smart Controller is a remote controller built with DJI’s long-range transmission technology OCUSYNCTM 2.0, offering a maximum transmission range of 6.2 mi (10 km) and provides a live HD view from the aircraft’s camera. The Smart Controller comes with a number of aircraft and gimbal controls as well as customizable buttons and has a built-in 5.5-inch high-brightness screen with multiple functions such as Bluetooth and GNSS. Connection to the Internet via Wi-Fi is also supported. The Smart Controller has a  maximum working time of 2.5 hours.

1. Antennas
2.  Back Button / Function Button
3.  Sticks
4.  RTH Button
5.  Flight Pause Button
6.  Flight Mode Switch
7.  Status LED
8.  Battery Level LEDs
9.  5D Button
10.  Power Button
11.  Confirm Button / Customizable Button C3
12.  Touch Screen
13.  USB-C Port
14.  Microphone
15.  Gimbal Dial
16. Record Button
17.  HDMI Port
18.  MicroSD Card Slot
19.  USB-A Port
20.  Focus / Shutter Button
21.  Aperture/Shutter Adjustment Dial
22. Air Vent
23.  Sticks Storage Slot
24.  Customizable Button C2
25.  Speaker
26.  Customizable Button C1
27.  Air Intake

The Smart Controller is able to reach its maximum transmission distance (FCC) in a wide-open area with no electromagnetic Interference at an altitude of about 400 ft (120 m).
The maximum runtime is tested in a laboratory environment. This value is for reference only.

Preparing the Aircraft

Unfold the front arms and the propellers before the rear ones. All arms and propellers must be unfolded before takeoff.

Charging the Batteries

Use the provided charger to fully charge the Intelligent Flight Battery before first use.

Please use the official 24W USB charger to charge the Smart Controller. When a standard 24W USB charger is not available, it is recommended to use an FCC/CE certified USB charger rated 12V/2A.

• Press once to check the battery level. Press, then press and hold to turn on/off.
• Press once to check the battery level on the LCD screen.
  • Press once, then press and hold to turn on/off the remote controller.

Install the battery to the aircraft and power it on. Once the battery temperature is lower than 6° C, it will auto heat to maintain a temperature between 8-10° C. Refer to the User Manual for more details.

Preparing the Remote Controller

The optimal transmission range is shown above. Ensure the antennas are facing towards the aircraft. When the angle between the antennas and the back of the Smart Controller is 80° or 180°, the connection between the Smart Controller and the aircraft can reach its optimal performance.

• Ensure the control sticks are firmly mounted.
• In real operation, the DJI Pilot app will prompt to warn that the transmission signal is weak, and please adjust the antennas to ensure that the aircraft is back to the optimal transmission range.

Preparing for Takeoff

Use a DJI account to activate the aircraft and the Smart Controller. Activation requires an internet connection. Before activating the aircraft in DJI Pilot, power on Internet the Smart Controller and follow the prompts to activate.
Set a password for the aircraft in the DJI Pilot app to ensure secure access and protect your onboard data.

Flight

Before taking off, make sure the Aircraft Status Bar in DJI Pilot displays “Ready to Go”.

Only stop motors mid-flight in emergency situations when doing so can reduce the risk of damage or injury. The method to stop the motor can be set in DJI Pilot.

Remote Controller Operation
The default flight control is known as Mode 2. The left stick controls the aircraft’s altitude and heading, while the right stick controls its forward, backward, left and right movements. The gimbal dial controls the camera’s tilt.

• Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the Home Point, you should guide it with the control sticks.
• Press the Flight Pause button for emergency braking during flight.

Modular Accessories

Fly Safe

Avoid flying over or near obstacles, crowds, high voltage power lines, trees, or bodies of water.
DO NOT fly near strong electromagnetic sources such as power lines and base stations as it may affect the onboard compass.

DO NOT use the aircraft in adverse weather conditions such as rain, snow, fog, and wind speeds exceeding 10 m/s or 22 mph.

It’s important to understand basic flight guidelines, for the safety of both you and those around you. Don’t forget to read the Disclaimer and Safety Guidelines.

Specifications

• Aircraft
• Takeoff Weight 909 g
• Max Speed 72 km/h (S-mode) (near sea level, no wind)
• Max Service Ceiling Above Sea Level 6000 m
• Operating Temperature Range 14° to 104° F (-10° to 40° C)
• GNSS GPS+GLONASS
• Operating Frequency 2.4-2.4835 GHz; 5.725-5.850 GHz
• Transmission Power (EIRP) 2.4 GHz
• FCC: ≤26 dBm; CE/MIC: ≤20 dBm; SRRC: ≤20 dBm
• 5.8 GHz
• FCC: ≤26 dBm; CE: ≤14 dBm; SRRC: ≤26 dBm
• Internal Storage 24 GB
• Gimbal
• Controllable Range Tilt: -90 to 30°
• Thermal Camera
• Sensor Uncooled VOx Microbolometer
• Lens Focal Length Approx. 9 mm
• Equivalent: Approx. 38 mm
• Sensor Resolution 640×512 @30Hz
• Digital Zoom 16×
• Pixel Pitch 12 μm
• Spectral Band 8-14 μm
• Photo R-JPEG
• Video MP4
• Temperature Measurement Method Spot Meter, Area Measurement
• FFC Auto/Manual
• Visual Camera
• Sensor 1/2” CMOS, Effective pixels: 48 M
• Lens FOV: approx. 84°
• Equivalent: 24 mm
• Aperture: f/2.8
• Focus: 1 m to ∞
• ISO Range Video: 100-12800 (auto)
• Photo: 100-1600 (auto)
• Max Image Size 8000×6000
• Still Photography Modes Single Shot
• Interval (2/3/5/7/10/15/20/30/60 s)
• Pano: spherical panorama
• Video Recording Modes 3840×2160@30fps
• 1920×1080@30fps
• Photo JPEG
• Video MP4

Smart Controller

• Operating Frequency 2.400-2.483 GHz; 5.725-5.850 GHz
• Max Transmission Distance
• (unobstructed, free of interference)
• FCC: 10 km; CE: 6 km; SRRC: 6 km; MIC: 6 km
• Transmitter Power (EIRP) 2.4 GHz
• FCC: ≤25.5 dBm; CE/MIC: ≤18.5 dBm; SRRC: ≤19 dBm
• 5.8 GHz
• FCC: ≤25.5 dBm; CE: ≤12.5 dBm; SRRC: ≤18.5 dBm
• Storage Capacity ROM 16 GB + Scalable (microSD card)
• Battery 5000 mAh @ 7.2 V
• Operating Temperature Range -4° to 104° F (-20° to 40° C)
• Charging Time 2 hr (with a USB charger at 12V/2A)
• Battery Life 2.5 hr
• 24W USB Charger Input: 100-240 V, 50-60 Hz, Max. 0.8 A
• Output: 3.6-8 V 3.0 A/12 V 2.0 A
• Intelligent Flight Battery
• Capacity 3850 mAh
• Voltage 17.6 V (max)
• 15.4 V (typical)
• Battery Type LiPo
• Energy 59.29 Wh
• Net Weight Approx. 297 g
• Charging Temperature Range 41° to 104° F (5° to 40° C)
• Heating Method Manual/Auto
• Heating Temperature Range -4° to 43° F (-20° to 6° C)
• Heating Time 500 s (max)
• Heating Power 55 W (max)
• Intelligent Flight Battery Charger
• Input 100-240 V, 50-60 Hz, 1.8 A
• Output Main: 17.6 V 3.41 A or 17.0 V 3.53 A
• USB: 5 V 2 A
• Rated Power 60 W

For more information, read the User Manual: www.dji.com/mavic-2-enterprise- advanced This content is subject to change without prior notice. MAVIC is a trademark of DJI.
Copyright © 2021 DJI All Rights Reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>