samlexsolar SPB-EXPLORE200 Solar Power Bundles Installation Guide
- September 27, 2024
- samlexsolar
Table of Contents
samlex solar SPB-EXPLORE 200 Solar Power Bundles
Thank you
Thank you for purchasing the Samlex Solar Power Bundle. We know you will enjoy many years of great service from this quality state-of-the-art product. Samlex Customer Service and Application Engineers are available to assist you with installation, setup, or operating instructions.
The Solar Power Bundle is highly configurable for many different and specific applications. To get you up and running quickly, we have created this simple overview Reference Guide to assist you with the basic setup procedures so that you may later configure for your specific needs.
Install Instructions
Read all Manuals prior to Install
- Check all materials in your kit
- Plan your system
- Location for all products
- Cable and connections between all products
- Refer to wiring diagram
- Install Solar Panels
- Install Charge Controller
- Install Inverter
- Install Fuse
- Install Transfer Switch – Electrician required to conduct work
WARNING
- If there are any items of the Reference Manual that you do not understand, do not attempt to install the unit yourself. For a safe and code compliant installation, consult a Certified Electrician that is familiar with Local and National electrical codes, proper installation of solar panels, and the design of alternative energy systems.
- All electrical systems both DC and AC must be disconnected from the source during the installation.
- Use of insulated tools is recommended.
Specification
| SPB-EXPLORE200 Includes | Reference Manual |
|---|---|
| 1 | SRV-200-30A |
30AB Manual
1| NTX-1500-12| Pure Sine Wave Inverter, 1500 Watts| NTX-1500-12 Manual
1| STS-30| Transfer Switch with Inverter Quick Connect 30 Amps| STS-30 Manual
1| DC-2500-KIT| 2500W Inverter Install Kit: (1) 300A fuse assembly (includes
fuse), (1) 10 Ft AWG# 2/0 Positive Cable, (1) 10 Ft AWG# 2/0 Negative Cable|
DC-2500-KIT and NTX-1500-12 Manuals
1| SC-05| 5W Sun Charger Battery Maintainer| SC-05 Manual
1| ATM-HOLDER| Inline Fuse Holder for #12 Awg Cable| SCC-30AB Manual
1| ATM 30A FUSE| ATM Type 30A Fuse for #12 Awg Cable| SCC-30AB Manual
SPB-SHARE400 Includes:| Reference Manual
2| SSP-200-KIT| Solar Panel Kit, 200 Watts with cables, connectors and
mounting bracket| EVO-30AB Manual
1| EVO-30AB| Solar Charge Controller, 12/24V, PWM, 30 Amp| EVO-30AB Manual
1| EVO-2212| Inverter/Charger Input: 12VDC Output: 120VAC 2200 Watt c/w 100
Amp Charger| EVO Quickstart Guide and Manu
1| EVO-RC-PLUS| Remote control for EVO Inverter Charger 1212F, 1212F-HW,
1224F, 1224F-HW| EVO-RC-PLUS Manual
1| SBC-2-DC| Solar Panel Branch Connectors: (1) Female Connector, (1) Male
Connector| EVO-30AB Manua
1| DC-2500-KIT| 2500W Inverter Install Kit: (1) 300A fuse assembly (includes
fuse), (1) 10 Ft AWG# 2/0 Positive Cable, (1) 10 Ft AWG# 2/0 Negative Cable|
DC-2500-KIT and EVO-2212 Manuals
1| SC-10| 10 W Sun Charger Battery Maintainer| SC-10 Manual
1| Cable Set, 5’ #10 Awg| Cable Set, Red & Black 5ft, #10 Awg with ATC 30A
Fuse| EVO-30AB Manual
SPB-ENJOY600 Includes:| Reference Manual
3| SSP-200-KIT| Solar Panel Kit, 200 Watts with cables, connectors and
mounting brackets| EVO-30AB Manual
1| EVO-30AB| Solar Charge Controller, 12/24V, PWM, 30 Amp| EVO-30AB Manual
1| EVO-3012| Inverter/Charger Input: 12VDC Output: 120VAC 3000 Watt c/w 130
Amp Charger| EVO Quickstart Guide and Manual
1| EVO-RC-PLUS| Remote control for EVO Inverter Charger 1212F, 1212F-HW,
1224F, 1224F-H| EVO-RC-PLUS Manual
2| SBC-2-DC| Solar Panel Branch Connectors: (1) Female Connector, (1) Male
Connector| EVO-30AB Manua
1| DC-3500-KIT| 3500W Inverter Install Kit: (1) 400A fuse assembly (includes
fuse), (1) 10 Ft AWG# 4/0 Positive Cable, (1) 10 Ft AWG# 4/0 Negative Cable|
DC-3500-KIT and EVO Manuals
1| SC-10| 10 W Sun Charger Battery Maintainer| SC-10 Manual
1| Cable Set, 5’ #10 Awg| Cable Set, Red & Black 5ft, #10 Awg with ATC 30A
Fuse| EVO-30AB Manual
- Contact your supplier if any of the items are missing. If any damage is observed, do not proceed with the installation.
- Check that the model and specifications are correct (e.g. 12 or 24 Volt battery system, AC voltage and output power
meets the load requirements).
Read the entire Owner’s Manuals of each of the products included in the Solar Power Bundle.
-
Familiarize yourself with its contents prior to installation or operation. This Guide will frequently refer to specific pages in the
Owner’s Manual for detailed information. -
Plan mounting locations and wiring in accordance with codes and directions from each product’s manual.
SPB-EXPLORE-200 Installation
SPB-SHARE-400 Installation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>