PATPET 682 Dog Training Collar User Manual

USER MANUAL

Please familiarize yourself with the Training Collar for your pet’s safety!

0.3.0.02.682X00-14-AT

Dear Pet Parent,

Here is PATPET Team,who has been rooted in Pet Training Supplies since 2014.We are honored to provide service for you and your pet in the following days!

We know that nurturing a lasting bond with a pet takes patience,commitment and some help of training device. This is why we dedicate all of our time and creative resources to making pet care accessories that are smarter and simpler.

Our products are not meant to replace the training process 5 but be able to aid it. They should never be used as punishment,overused or treated as a one- fit-all solution. They are most effective at the very start of the training process and when your pet shows some misbehaviors: like crossing the road, picking up food on the street,barking all the time or pounce on other persons when walking. After all,your pet’s safety and well-being should always stay a priority throughout this experience.

During the training, we strongly recommend focusing on reward training and making positive reinforcement, as we know that any training process is a two- way street.

At last, we look forward to offering you better products and services.Feel free to give us feedback via support@patpet.com.

Yours
PATPET Team

Overview

Remote

A.Lock Status Display
B.Battery Display
C.Tone Button
D.Vibration Button
E.Shock Button
F.Lock Switch (ON/OFF)
G.Charging Port
H.Shock Level Display
I.Channel Switch
1: Control a dog
2: Control another dog
J.Channel Display
K.Knob For Shock Level +/

Collar

A.Contact Points
B.Charging Port (with cover)
C.On/Off Button
D.LED Indicator
E.Contact Spring Sheet

Product Setup

Before using the Dog Training Collar, follow these setup steps:

1. Charge the Remote and Collar.
2. Get the Remote ready and turn it on.
3. Get the Collar ready and turn it on.
4. Test all button functions before placing the collar on your pet.
5. Use the Light Test Tool
6. Pair the Remote and Collar

How to Charge the Remote and Collar?

1. Charge the remote and collar using their dedicated charger – make sure to charge each device for at least 4 hours. For subsequent charges, 2-3 hours will be enough.

2. Once the collar is fully charged, its red LED indicator will turn green.
   Once the remote is fully charged, its battery indicator will show up as full.

3. Once the collar is fully charged, place the rubber cap covering the charging port back in its place.

Note:

1. Excessive charging will shorten battery life. Try to only charge and the remote and collar when they are low on battery.
2. When you’re not using the collar, turn the device off to save battery.
3. Use the following output: DC 5V 500-800mA
   Don’t use chargers that don’t meet necessary specifications to charge the remote and collar.

Get the Remote Ready

How To Turn ON/OFF the Remote?

1. To turn on the remote, push the lock switch from “ ” to “ ” to turn on the remote.
2. The screen will light up and display current channel data and battery level. If the screen doesn’t light up, charge the remote.
3. To turn off the remote, push the lock switch from “ ” to “ “.

Get the Collar Ready

Make sure to use our distribution test tool to install the contact points.

Alternatively, you can use a contact spring sheet for a more effective connection.

How To Turn On the Collar?

• To turn on the collar, press the ON/OFF button.
• The LED light on the collar will turn green. In standard mode, the greed LED will flash every 4 seconds indicating that the collar is on and ready to receive a signal from the remote.

How To Turn Off the Collar?

• To turn off the collar, press and hold the ON/OFF button until the red LED light is out – this shouldn’t take longer than 3 seconds.

Note:
Make sure to turn the collar off when it’s not in use to save battery.

How to Perform a Function Test

We strongly suggest that you first text all the three shock levels of the collar on yourself to see exactly how they feel. We recommend you start at the lowest level and then move on to higher ones up to your personal comfort level.

1. Place one finger over both contact points of the training collar.
2. Hold the remote at approximately 2 ft away from the training collar as you press the Vibration Button continuously for 1 to 2 seconds. At this level, you should feel continuous vibration.
3. Next, go to level 1 and press the Shock Button.
4. Keep increasing the levels until the sensation begins to feel uncomfortable.

Note:
Continuous stimulation will go on for no more than 10 seconds.
To reactivate stimulation, release and press the button again.

| Tone: sends a tone (non-adjustable level) to the training collar.
---|---
| Vibration: sends a vibration (non-adjustable level) to the training collar.
| Shock: sends static stimulation (adjustable in 1-16 levels) to the training collar.
| : Lock (Turn off)
: Unlock (Turn on)
| Switch between channels

Important!
Do not press and hold the Vibration/Shock Button for extended periods of time. This may cause physical or psychological pain to your pet.

How To Use the Test Light Tool?

Shock Function Test

1. Make sure the collar is off your dog.
2. Turn on the collar.
3. Hold the test light’s contacts against the constant points of the collar.
4. Press the Shock Button – the test light tool will light up. Its brightness will increase or decrease depending on the level of stimulation you are using.

You can also use the test light tool to tighten or loosen contact points when you get the collar ready.

How To Pair Remote With the Collar?

1. On the remote, use the channel switch to select Dog 1.
2. With the remote turned on and the collar turned off, press and hold the ON/OFF button on the collar for 4-5 seconds.
3. The LED on the collar will flash for about 10 seconds to indicate that it’s ready for pairing.
4. Press and hold Tone Button and Vibration Button at the same time for 2-3 seconds. The green LED on the training collar will blink 5 times to indicate successful pairing.

How To Pair The Second Collar With The Remote?

On the remote, use the channel switch to select Dog 2. Next, follow the above steps (2-4) to complete the pairing process.

Dog Training

How to Select Contact Points and Contact Spring Sheet?

For the best results, it’s important to select suitable contact points based on the thickness of your dog’s coat.
You can use the contact points separately or together with the spring sheet.

Collar Fitting

When placing the collar on your dog, make sure it fits properly and the contact points are pressed firmly against the dog’s skin. If the collar is fitted too loosely, it may move during the training process and the contact points may hurt the dog’s skin.
The collar should also not be fitted too tightly: you should be able to place a finger between the dog’s neck and the training collar. If placed too tightly, the collar may cause breathing difficulties for your dog.

Caution:
Do not shave your pet’s neck as this may increase the risk of skin irritation.
Your dog shouldn’t wear the collar for more than 12 hours per day.

How To Find The Best Stimulation Level For Your Pet?

Important: always start with the vibration mode first and use the static shock mode as the last resort.

Depending on the model of your training collar, you may be able to access anywhere from one to sixteen different stimulation levels. This can help you find the level that is best for your dog.
Once you’ve placed the collar on your pet, it’s time to find the most suitable stimulation level.
At this stage of the process, you will need to watch your pet carefully for the slightest changes in behavior like looking around in curiosity, scratching at the collar or flicking ears. All these behaviors are indicators that you have found a suitable stimulation level. This is also known as Recognition Level.

Follow the steps below:

1. Start at the lowest stimulation level: press and hold the Vibration or Shock Stimulation Button continuously (further referred to as the [S] button).

2. If your pet shows no reaction, repeat the first step several times before moving up to a higher stimulation level.

3. YOUR PET SHOULD NOT BARK OR PANIC WHEN RECEIVING
   STIMULATION. IF THIS HAPPENS THE STIMULATION LEVEL IS TOO HIGH AND YOU NEED TO GO BACK TO THE PREVIOUS LEVEL AND REPEAT THE PROCESS

4. Move up through the available stimulation levels until your pet responds.

5. If your pet continues to show no response at the highest stimulation level, check if the collar is fitted properly. If your pet has long or thick fur, try using the longer set of contact points. Then go back to step 1 and repeat the process. If there is no change, you might need to trim your dog’s hair around the contact points.

Device Information

Receiver: 11 days
Remote Waterproof Rating| Non-Waterproof (Keep away from water)
Receiver Waterproof Rating| IEC 60529 IPX7, Waterproof
Operating Temperature Range| From 0-40°C(from 32-104°F)
Wireless Power| 20dBm (100mW)
Wireless Range| 450m (1500 feet) in open space

Signs you need to charge the device:

1. The LED indicator on the collar is red and flashing rapidly.
2. The bar indicator on the remote’s screen shows just one bar.
3. The LED light on either the collar or remote doesn’t turn on.
4. The LED light on either the collar or remote blinks but doesn’t turn on when you press any of the mode buttons.

Troubleshooting Guide

My pet doesn’t react to stimulation|

• Make sure the Receiver Collar has been turned on.
• If your range has reduced from the first time you used the Remote Training Collar, the battery(s) may be low in either the Remote or Receiver Collar.
• Terrain, weather, vegetation, transmission from other radio devices and many other factors can impact the amount of range you have with the unit.
• Test the Receiver Collar. Refer to “How to use the Test Lamp” for details.
• Increase the Shock Level. Refer to “Find the Best Shock Level for Your Pet” for more information.
• Make sure the Receiver Collar’s Contact Points are placed snugly against your pet’s skin. Refer to “Collar Fitting”for more information.

The collar won’t turn on|

• Make sure the Receiver Collar has been charged.
  For the initial charge, be sure to charge it for 4 hours. Subsequent charges only take 2-3 hours.

The collar isn’t responding to the remote|

• Make sure the Receiver Collar is on.
• If the Indicator Light does not come on when any button is pressed on the remote, ensure that the batteries are charged properly.
• If the first two solutions did not resolve your problem, Refer to “Pair the Remote and the Receiver Collar”.

Basic Training Trick

The “Sit” Command

1. Put a separate, non-metallic collar on your pet’s neck ABOVE the e-collar and attach a 10-foot leash. Note: be sure the extra collar does not put pressure on the contact points.
2. Hold the leash and the remote in one hand. Keep your other hand free to guide your pet into a “Sit” position.
3. Press and hold the [S] button, starting at your pet’s Recognition Level.
4. Immediately give the ‘Sit” command while continuing to hold the [S] button.
5. Release the [S] button as soon as your pet is in position and praise him.
6. Release your pet from the “Sir command and play.
7. Repeat Steps 2 through 6.

Note: if your pet breaks the “Sit” command, repeat steps 3 through 6. Keep your pet close to you while teaching the “Sit” command.

The “Come” Command

1. Put a separate, non-metallic collar on your pet’s neck ABOVE the collar and attach a 10-foot leash. Note: be sure the extra collar does not put pressure on the contact points.
2. Hold your leash in one hand and the remote in the other.
3. Wait for your pet to walk away from you. Using the Recognition Level for your pet, press and hold the [S] button on your remote.
4. Immediately give the command “Come” while continuing to hold the [S] button.
5. Using the leash, gently guide your pet toward you until they begin to come in your direction.
6. Immediately release the [S] button as soon as your pet steps towards you and praise them enthusiastically.
7. Quickly move backwards as your pet begins to come back to you praising him the entire time.
8. Praise your pet when he returns to you.
9. Repeat Steps 3 through 8.
10. Once your pet has responded readily to the “Come command several times, back away from him without giving a command. When your pet turns toward you, give the “Come” command (WITHOUT STIMULATION) and praise them while you continue to back up. Praise your pet when he returns to you.
11. Use your leash to prevent your pet from running past you. If your pet manages to run past you, repeat Steps 3 through 8.

The “Stay” Command

1. Put a separate, non-metallic collar on your pet’s neck ABOVE the collar and attach a 10-foot leash. Note: be sure the extra collar does not put pressure on the contact points.
2. Put your pet on his bed or on a cooling mat. Hold your leash in one hand and the remote in the other.
3. Staying within 3 feet, walk the perimeter of the bed. Do not say anything to your pet.
4. If your pet tries to leave the bed, press and hold the [S] button and give the “Stay” command. Continue to hold the button until your pet is back on their bed. If necessary, use the leash to guide your pet onto their place.
5. Praise your pet when they are back on their bed. You are welcome to use treats.
6. Once your pet has settled for a few seconds, release him and play calmly.
7. Repeat steps 1 through 5.

Eliminating Unwanted Behavior

Jumping Up

Pets typically jump up to get attention. If you do not want your pet to jump on you, then friends or members of the family should not encourage this behavior as well. This means that every time your pet jumps on someone, they should be reprimanded or redirected to an alternate and acceptable behavior, for which they can receive praise.

Note: it is best if your pet first understands the “Sit” command.

1. On the remote, select your pet’s Recognition Level.
2. As soon as your pet lifts a paw off the ground to jump on you, press the [S] button and give the “Sit” command.
3. Release the [S] button immediately once your pet is sitting, and verbally praise them.
4. If your pet ignores the stimulation, increase the Intensity Level.
5. Practice this exercise in several different areas and use different people for distractions.

Digging

It is important to first understand why your pet is digging. Many dogs like terriers, were bred to flush out prey and digging is very natural to them.
Other dogs may be digging to find a cool spot to lay down or simply out of boredom.
Your pet may no longer have the desire to dig if they are is provided with the following:

• A cool, shaded area in which to lay down, and plenty of water.
• An alternate activity, such as a favorite toy.
• Plenty of play, exercise, and attention.
• A yard free from rodents or prey that your dog may be trying to find.

1. Choose the intensity level that is one level above your pet’s Recognition Level.
2. Place the collar on your pet and wait at least 10 minutes before letting them out in the yard. No other people or pets should be in the yard, as you do not want your pet to associate the stimulation with anything other than digging. Your pet must be securely fenced in or contained during training.
3. From a window or area where your pet cannot see you, wait until your pet begins to dig.
4. As your pet starts digging, press the [S] button and release it when the digging stops. Only press the button while your pet is in the act of digging and do not say anything.
5. If your pet ignores the stimulation, increase the Intensity Level.
6. Continue to watch your pet as they may choose another area to dig.
7. Do not allow your pet in the yard unsupervised until the digging has stopped completely.

Chasing

Chasing is an instinctive behavior stimulated by moving objects. Some dogs have a particularly strong desire to chase that can put them in harm’s way and leave you helpless. Never allow your dog off the leash or out of a contained area until they have learned the “Come” command, regardless of the distraction. Be consistent and correct your dog every time they chase something.
CAUTION! It is vitally important that you and your dog remain safe while learning during on-leash training. Your dog should be on a strong leash, long enough for him to attempt to chase an object, but short enough for him not to reach a road or other unsafe area. You must also be physically strong to restrain your dog when they try to chase.

1. If your dog has not learned the “Come” command, keep a leash on them so that you can physically stop them before they reach the object that is being chased.
2. Choose the intensity level that is one level above your pet’s Recognition Level.
3. Set up a scenario where your dog is enticed to chase an object. Common items could be cars, motorcycles, bicycles, etc. (do not use toys).
4. When the object passes in front of your dog, make sure to hold the leash with a firm grip. As soon as your dog begins to chase the object, press and hold the [S] A button until they stop.
5. When your dog stops chasing the object, immediately release the button, walk backwards and give the “Come” command. Praise your dog as they come to you.
6. Repeat the process until your dog stops chasing the object.

Trash Raiding

The easiest way to prevent trash raiding is to remove garbage and tempting food from your pet’s environment. You can use the e-collar to teach your pet to stay away from these items; however, you must be prepared to correct your pet every time they approach them.

1. Choose the Intensity Level 1 higher than your pet’s Recognition Level.
2. Choose the intensity level that is one level above your pet’s Recognition Level.
3. Pick a temptation for your pet and position yourself where they cannot see you.
4. While your pet’s mouth is touching the temptation, press and hold the [S] button. Immediately release the button when your pet leaves the temptation.
5. Do not say anything, as you want your pet to associate the stimulation with their behavior, not you.
6. If your pet does not respond to the stimulation, increase the Intensity Level by 1 level and repeat the process.
7. Repeat this process in several different locations with different temptations.

General Tips

• Most dogs will feel uncomfortable when wearing the collar for the first time. Don’t use any commands until your dog has got used to the collar which will normally take several days.
• Eliminate one unwanted action or teach one obedience command at a time. If you move too quickly with the training, your dog may become confused.
• Be consistent in your training. Give your dog the same stimulation for each unwanted action. We suggest you to use Vibration Stimulation before starting the Static Shock Stimulation. If you follow this training method, your dog will learn that Static Shock Stimulation might come after Vibration. This way, the Vibration Stimulation alone can effectively curb unwanted behavior of your dog.
• Do not over-correct. Use as little stimulation as possible to train your dog.
• Following a predefined scenario in all your training sessions can dramatically improve your chances of success.
• Should your dog react to the training by hiding or acting fearfully, try to redirect their attention to a simple command such as “Speak” or “sit” to calm them down.

1-YEAR WARRANTY

If any quality or operation problem, please feel free to let us know via support@patpet.com And to improve the efficiency, please send the info below in advance,

1. Your order screenshot to show the product model
2. One short video to show the problem
3. Your current shipping address

FCC COMPLIANCE

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.

Frequently Asked Questions

Once my pet’s training is complete, do I need to keep using the collar?****

It fully depends on your and your pet’s situation. You might need to reinforce the results of collar training from time to time.

How long can I continuously deliver Vibration or Shock stimulation to my pet?****

No longer than 10 seconds for Vibration mode. No longer than 3 seconds for Static Shock mode. IMPORTANT: while it is okay to use the Vibration mode for up to 10 seconds, it is highly recommended to limit the continuous Static Shock stimulation to no more than 3 seconds (the smaller the dog the shorter the time)

What should I do if my dog’s neck becomes red and irritated?****

Stop using the product immediately for at least 48 hours. If the condition persists beyond 48 hours, consult your veterinarian.

Can I attach a leash to the e-collar?****

No, this can result in pulling the contact points too tightly against your dog’s neck. Use a separate collar when needed.

How long can I leave the e-collar on my dog for?****

The collar is not designed to be worn continuously. We recommend your pet only wears the e-collar during training sessions or other outdoor activities.

How long can I continuously deliver vibration/Shock to my pet?****

The maximum amount of time you can press the Vibration/Shock Button and deliver Vibration/Shock to your pet continuously is 10 seconds. After this, there’s a time-out an Vibration/Shock cannot be delivered for 5 seconds. After the 5 second time-out period, Button can be pressed and Vibration/Shock can be delivered again.

Is the Vibration/Shock safe for my pet?****

While the Vibration/Shock stimulation may be unpleasant, it is generally harmless to your pet when used correctly. However, your input as a trainer is essential in ensuring the safety of this process.

How old does my pet have to be for me to use the e-collar for training?****

Your pet should be able to recognize basic obedience commands such as “Sit” or “Stay”. Pets should be at least 6 months old before you can use the training collar to train them.

Once my pet is trained and has been obeying my commands, will he have to continue to wear the Receiver Collar?****

Probably not. You may need to reinforce training with the Receiver Collar from time to time.

Is the e-collar waterproof?****

Yes.

Will I get exactly 1500 feet of range with the collar’s remote?****

The range of the remote may be affected by a number of factors like terrain, weather, vegetation, transmission from other radio devices and so on.

How long should the training session be?****

Training sessions should be kept short and positive (10-15 minutes).

The R &D of Pet Training Supplies

  https://patpet.us/
  support@patpet.com
  @PATPET
  1-855-888-9922

MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>