Skull Co B09PR3XCHF Portable Jumpgate Dock User Manual
- June 5, 2024
- Skull Co
Table of Contents
Jumpgate Dock
User Manual
HOW TO POP UP THE DOCK
To pop up the dock, please press the area shown above
SPECIFICATIONS
ADJUSTING THE SPACE FOR A PROTECTIVE CASE
Push the spacing switch DOWN when docking your Switch WITHOUT a protective case|
Push the spacing switch UP when docking your Switch WITH a protective case
---|---
HOW TO DOCK AND REMOVE YOUR SWITCH
Press the top of the Jumpgate Dock
|
The top cover will pop up
---|---
Slide in your Switch into the Jumpgate Dock (you can dock your smartphone the same way)
|
To remove your Switch use one hand to stabilize the Jumpgate Dock and the other hand to lift your Switch
REMOVING THE GUIDE PILLAR FOR A 3RD PARTY CASE
Pull the guide pillar up when the top of the Jumpgate pops up (no need to
remove it for GripCase)
Once the guide pedlar is removed you don’t have to remove the protective case
before docking your Switch
USING THE KICKSTAND
|
---|---
Turn the Jumpgate upside down| Open the kickstand
For Nintendo Switch
Key features:
- Dock your Switch with a protective case
- TV Mode with 15V power
- TV Mode with 5V power
- Tabletop Mode while charging (when HDMI is disconnected)
- Two viewing angles for Tabletop Mode
- One USB 3.0 and one USB 2.0 port function without an AC adapter
- The detachable Core Drive can be used as a portable dock
- The Jumpgate can be used as a charging stand without the Core Drive
**** When you use a 5V charger for Switch TV Mode, the joy-cons may flicker due to different production batches. However, this will not harm the Switch or joy-cons. Just remove the joy-cons if the flickering bothers you
For Smart Phone
Key features:
- Dock your smartphone with a protective case
- HDMI port for DeX/TV-Out (only works for the smartphones that have DeX/TV-Out function)
- One USB 3.0 and one USB 2.0 port for mouse, keyboard, and flash drive
- SD & microSD slots (cannot be used at the same time)
- The Core Drive functions without the Jumpgate dock
- The Core Drive can be used as an OTG adapter
- The Jumpgate can be used as a charging stand without the Core Drive
For Laptop
Key features :
- HDMI output
- One USB 3.0 and one USB 2.0 port
- SD & microSD slots (cannot be used at the same time)
- The USB-C port can deliver up to 100W power
- The Core Drive functions without an AC adapter
DETACHING THE CORE DRIVE
Put your thumb into the gap
Take the Core Drive out in the direction of the arrow
UPDATING THE JUMPGATE/CORE DRIVE FIRMWARE
**** The Core Drive is ready for use out of the box. There is no need to update the firmware. A Core Drive firmware update will be available on our website if Nintendo bans our system.
- Download the APP on our website: www.skulInco.com SUPPORT DOWNLOAD FIRMWARE
- Install the APP on your computer.
- Open the APP and connect the Core Drive to your computer via a USB cable; USB-A or USB-C to the computer and USB-C to the Core Drive.
- Click the “Update” button, it will start updating the firmware.
- Disconnect the Core Drive after the updating is completed.
**** If the Core Drive is disconnected before the update is successfully completed, simply re-connect the Core Drive to the computer and click “Update” again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>