GEMMY GPO883047 Orchestra of Lights Hub User Manual

GEMMY GPO883047 Orchestra of Lights Hub

Product Information

Orchestra of LightsTM – Hub

The Orchestra of LightsTM – Hub is an electric product that is intended to be assembled by adults only. It is not recommended for children under 3 years of age. The product needs to be handled with precautions to reduce the risk of electric shock. The power unit is intended to be correctly orientated in a vertical or floor-mount position.

Safety Information

• Read and understand all instructions before assembling the product.
• Keep the product away from children.
• Inspect the product carefully before using and reusing it.
• Store the product neatly in a cool, dry location protected from sunlight when not in use.
• Do not mount or support wires in a manner that can cut or damage wire insulation.
• For indoor use only.

Usage Instructions

1. Before using and reusing, inspect the product carefully. Discard any products that have cut, damaged or frayed wire insulation cords, cracks, lamp holders or enclosures, loose connections, or exposed copper wire.
2. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections and wires.
3. When not in use, store neatly in a cool, dry location protected from sunlight.
4. Make sure that the supply cord is not damaged before assembling, disassembling, or relocating the item.
5. Remove all plastic fasteners and tags before using.
6. Make sure that the power source is not disabled or the cord is not unplugged before using the product.
7. Keep the Hub in an open area so signals can be received and sent. The recommended distance between the Hub and lighting products is 45 feet or less.
8. If the light show hub is not working, try reconnecting it to your home WiFi network. If the connection fails and your Hub doesn’t display a steady blue light, reset the Hub using the button on the device.

Troubleshooting Checklist

• If your light show hub is not working, check if the power source has become disabled or the cord may be unplugged.
• Something may be blocking the Hub. Insure it is kept in an open area so signals can be received and sent.
• Try to reconnect your Hub to your home WiFi network.
• If the connection fails and your Hub doesn’t display a steady blue light, reset the Hub using the button on the device.

Important Information

• This device complies with Part 15 of the FCC Rules.
• This equipment has been tested and found to comply with the limits for a Class B digital device.
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS.
WARNING: ELECTRIC PRODUCT

This product is to be assembled by adults only. Keep away from children. Not recommended for children under 3 years of age. As with all electrical products, precautions should be observed during handling and use to reduce the risk of electric shock. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
item is unplugged from the electrical outlet before assembling, disassembling, or relocating.

IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS

• This is an electrical product – not a toy! To avoid risk of fire, burns, personal injury, and electric shock, it should not be played with or placed where small children can reach it.
• Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
• This seasonal use product is not intended for permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
• Do not secure product wiring with staples or nails or place on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the house, when retiring for the night, or if left unattended.
• Do not use this product for other than its intended purpose.
• Do not hang ornaments or other objects from cord, wire, or light string.
• Do not close doors or windows on the product, or extension cords, as this may damage the wire insulation.
• Do not cover the product with a cloth, paper, or any material not part of the product when in use.
• Do not place the product against carpeting, furniture, or any other fabric when in use.
• Read and follow all instructions that are on the product or provided with the product.

SAVE THESE INSTRUCTIONS
USE AND CARE INSTRUCTIONS

1. Before using and reusing, inspect the product carefully. Discard any products that have cut, damaged or frayed wire insulation cords, cracks, lamp holders or enclosures, loose connections, or exposed copper wire.
2. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections and wires.
3. When not in use, store neatly in a cool, dry location protected from sunlight.

WARNING
Do not mount or support wires in a manner that can cut or damage wire insulation.
This power unit is intended to be correctly orientated in a ver

WARNING
Remove all plastic fasteners and tags. These are part of the packaging and should be discarded.
For indoor use only.This item is not a toy. For decorative purposes only.

TROUBLESHOOTING CHECKLIST

If you light show hub is not working, the problem may be:

1. The power source has become disabled or the cord may be unplugged.

2. Something may be blocking the Hub. Insure it is kept in an open area so signals can be received and sent.
   The recommended distance between the Hub and lighting products is 45 feet or less.

3. Up to 3 users may successfully control Orchestra of Lights products linked to the Wifi Hub. A 4th user may have unintentionally reset the Hub. If so, try reconnecting your Hub to your home WiFi network

4. If the connection fails and your Hub doesn’t display a steady blue light, reset the Hub using the button on the bottom of the Hub. Hold the button five seconds until the Hub resets and flashes the red and blue lights together.

WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this the device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help with important announcement

Important Note:

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be practiced including the following:

1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

2. Read and follow all instructions that are on the product or provided with the product.

3. Do not use an extension cord.

4. Reference the National Electrical Code, ANSI NFPA 70, specifically for the installation of wiring and clearances from
   power and lighting conductors.

5. Installation work and electrical wiring must be done by a  qualified person(s) in accordance with all applicable codes
   and standards, including fire-rated construction.

6. Do not install or use within 10 feet of a pool.

7. Do not use in a bathroom.

8. WARNING: Risk of Electric Shock. When used outdoors, install only to a covered Class A GFCI-protected receptacle that is weatherproof with the power unit connected to the receptacle. If one is not provided, contact a qualified electrician for proper installation. Ensure that the power unit and cord do not interfere with
   completely closing the receptacle cover.

9. WARNING: Risk of Fire. Installation involves special wiring methods to run wiring through a building structure. Consult a qualified electrician.

10. If the connector of this driver does not properly fit into the connector of the lighting string, do not modify the product
    and discard the product if the connector is damaged.
    WARNING: Not for use with receptacles that are weatherproof only when the receptacle is covered (attachment plug cap not inserted and receptacle cover closed).

PACKAGE CONTENTS

• HUB 1pc
• Ethernet cable 1pc
• UL- Listed power supply 1рс
• Input: 100 V – 240 V~ 50 / 60 Hz 0.2A
• Output: 5 V – – 1000mA 5W

THESE INSTRUCTIONS ARE FOR THESE ITEM NUMBERS

Visit WWW.GEMMY.COM for more information.
©2023 GEMMY INDUSTRIES CORP.
117 WRANGLER DRIVE. SUITE 100
COPPELL, TX 75019 U.S.A.
1 800-274-6717
MADE IN CAMBODIA / PRINTED IN CAMBODIA

References

• Gemmy Industries – A trendsetter and leader in the seasonal decor space.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>