blumfeldt 10032565 Electric Heat Square Patio Heater Instruction Manual

blumfeldt 10032565 Electric Heat Square Patio Heater

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

CONTENT

• Safety Instructions 12
• Product Overview 14 Installation 15
• Operation 16
• Care and Cleaning 17
• Disposal Considerations 18 Manufacturer & Importer (UK) 18

TECHNICAL DATA

SAFETY INSTRUCTIONS

• Read all instructions before using this unit.
• Do not leave this unit unattended when in use.
• This heater will get hot when in use. Do not touch hot surfaces.

CAUTION
RIsk of burns! Some parts of this product can become very hot and cause burns. Particular attention has to be given when children and vulnerable people are present.

• Do not move the unit when in use. Wait until the heater is completely cool before moving and check that it has been unplugged from the power supply.
• Position the unit at least 1m away from highly combustible materials such as furniture, trees, leaves, dry grass and bushes.
• The heater must not face with the heating element pointing upwards towards a ceiling. The heater element must be facing the area it is to heat.

IMPORTANT: In order to avoid overheating do not cover the heater. It is not for drying clothes.

• Keep children and pets at a safe distance from the unit.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack
  of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• Do not operate the heater if any signs of damage or malfunction manifest themselves.

• Do not attempt to repair or adjust any electrical or mechanical functions on this unit. The unit does not contain any user serviceable parts. Only a qualifi ed electrician should perform servicing or repairs. Attempting to repair the unit yourself will void your warranty.

• If the power cable is damaged, it must be replaced by the manufacturer, its service agent or similarly qualifi ed persons in order to avoid a hazard.

• Do not handle the element with bare hands. If it is inadvertently touched, remove finger marks with a soft cloth and methylated spirits or alcohol, otherwise the marks will burn into the element causing premature heater failure.

• Do not replace or attempt to replace the element in this product.

• This product is suitable for indoor and outdoor use. Do not use this heater in the immediate surroundings of a bath, shower or swimming pool.

• This product must not be left outdoors exposed to the elements for long periods of time.

• Do not touch the plug with wet or damp hands.

• Do not run the power cable under carpeting. Do not cover the power cable with rugs, runner, or similar coverings. Arrange the power cable away from foot traffic and where it will not be tripped over.

• Do not wind the power cable around the unit.

• Do not insert or allow foreign objects to enter any ventilation or opening on the heater, as this may result in electric shock, fire, or damage to the heater.

• To prevent a possible fire, do not block the air vents.

• A heater has hot and arcing or sparking parts inside. Do not use in areas where petrol, paint, explosive and/or flammable liquids are used or stored. Keep unit away from heated surfaces and open flames.

• Where possible, avoid the use of an extension cable as this may overheat and cause a fire. However, if you have to use an extension cable, ensure it is suitable for the purpose, has been tested for outdoor use and preferably has an RCD device fitted or attached.

• Always ensure the heater is plugged into a suitable socket, one that is tested for outdoor use.

• Always unplug the unit and ensure the unit is completely cold before moving, cleaning or storing.

• This heater is intended for domestic use only and should not be
  used commercially for contract purposes. Any alternative use, not recommended by the manufacturer, may result in fire, electric shock, or injury to persons.

• The use of attachments on the heater is not recommended.

• Do not use this heater with a programmer, timer, separate remote control system or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.

CAUTION
Risk of injury! This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when occupied by persons not capable of leaving a room on their own, unless constant supervision is provided.

• Check exterior walls for areas of damage before installing the heater.
• Check exterior walls for communication and electrical cables and pipelines. Should any service lines be present in the immediate vicinity do not install your heater, fi nd an alternative location to install this product.
• Do not position directly above or below an electrical socket.
• Do not remove any of the warning stickers or signs from the product.

PRODUCT OVERVIEW

INSTALLATION

Important Notes on Installation

• Unpack the heater making sure that all the items are present and that there are no components left in the box and that the heater head is free from any packing material.
• Using the detailed drawing follow the steps to assemble your heater.
• Do not connect the heater to the power supply until all the assembly is complete.
• Do not connect the heater to the power supply if any of the components or the power cable is damaged in any way.

Assembly

Note: Make sure the heater is turned off before hanging under a balcony or roof.

1. Make sure that hook (A) is securely attached to the heater.
2. Attach hook (B) to a secure post, beam or fixed object. You can also attach the hook (B) to the hook (A) to avoid an obstacle, e.g. a horizontal bar.
3. When the heater is securely installed, plug the plug into the wall outlet.

Note: Wait until the heater’s heating element has cooled down before moving it.

You must always make sure that there is at least 50 cm of empty space above the heater, 25 cm from the side and 180 cm below the heater.

OPERATION

Note: The heater must be properly installed before use.

This appliance is equipped with an on/off switch:

• Connect the heater to a grounded outlet.
• Do not operate the heater unless it is in an upright position.
• The heater is equipped with three heating levels.

Remote control

• Press the On/Off switch to activate the heater.
• To operate the heater at 1000W, press the left or right side button on the remote control.
• To operate the heater at 2000W, press both the left and right side buttons on the remote control.
• To turn on the LED light, press the upper button on the remote control.

Activation button

• Press the On/Off switch to activate the heater.
• Press the button once to operate the heater at 1000W.
• Press the button twice to operate the heater at high 2000W power.
• Press the button three times to activate the LED ambient lighting without heat.
• Press the button four times to activate the LED backlight and operate the heater at 2000 W power.
• Press the button five times to turn off the light and heater.

CARE AND CLEANING

Attention: Careful and regular maintenance of your infrared heater is required to ensure a long and efficient operation of your appliance.

• Check the cleanliness of the reflector and IR-filament at least once a month. If necessary, clean reflector or filament according to cleaning instructions.
• Regular inspections must be done more frequently in dusty environments.
• Check for deformation of the reflector, wire and frame visually while cleaning the appliance. In case of any deformation, consult a qualified technician.
• Check the power cable and plug visually while cleaning the appliance. In case of any deformation, consult a qualified technician.

How to Clean the Heater

1. Unplug your power cable for your safety before cleaning your appliance. 2 Take out the front grid wire through the inlets on the frame using a slotted  screwdriver.
2. The reflector and filament must be cleaned with a soft cloth, a smooth  brush or cool or dry air. The cloth may be damp but never too wet and the cleaner should not include any chemical detergents.
3. Refrain from using cleaning materials likely to damage the reflector (scrubbing brush, etc.).
4. Reinsert the wire grid using a slotted screwdriver.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service. This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.

MANUFACTURER & IMPORTER (UK)

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.

Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>