blumfeldt 10031449 360 Degree Garden Terrace Brazier Instruction Manual

blumfeldt 10031449 360 Degree Garden Terrace Brazier

Product Information

Specifications

• Brand: Volantis
• Model Number: 10031449
• Manufacturer: Chal-Tec GmbH
• Importer (UK): Berlin Brands Group UK Limited

Product Usage Instructions

Safety Instructions

• Risk of suffocation! This product is for outdoor use only and should not be used in enclosed areas to prevent toxic fume accumulation.

Parts

• Components include Chimney, Stove tray, Bottom Chimney, Stove body, Tool, Door, Leg, M6*12 screw, Log grate, and M6 nut.

Assembly

1. Attach legs to stove tray using screws and nuts.
2. Attach stove body to stove tray using screws and nuts.
3. Attach the bottom chiminea to the stove body using screws and nuts.
4. Attach the chiminea to the bottom chiminea using screws and nuts.
5. Insert the log grate into the base of the chiminea and adjust the position using the provided tool.

Cleaning and Care

Allow the product to cool completely before inspecting or cleaning it for damage. Regularly check for damage to ensure safety and longevity.

Frequently Asked Questions (FAQ)

Q: Can this product be used indoors?

• A: No, this product is designed for outdoor use only to prevent the accumulation of toxic fumes.

Q: What tools are required for assembly?

• A: You will need either a Philips crosshead or flat-bladed screwdriver and an adjustable wrench or a pair of pliers for assembly.

SAFETY INSTRUCTIONS

• WARNING Risk of suffocation! This fire pit is for outdoor use only and shall not be used in a building, garage, or any other enclosed area.
• Toxic carbon monoxide fumes can accumulate and cause asphyxiation.
• This fire pit is not for commercial use.
• This fire pit should only be used by adults and all children and pets should be kept at a safe distance.
• Do not use petrol, white spirit, lighter fluid, alcohol, or other similar chemicals to light a fire as a rapid increase in temperature could damage the fire pit. This fire pit is only suitable for use with charcoal, untreated wood, or dry logs. Do not use coal.
• Do not use this fire pit until it is completely assembled and all parts are securely fastened and tightened.
• Do not use the fire pit on the decking or any other flammable surfaces such as dry grass, wood chips, or leaves.
• Always empty this fire pit after use. Leave a thin layer of ash to protect the bottom. Do not remove ashes or charcoal until they are completely and fully extinguished.
• Do not touch the fire pit until it is completely cooled unless you are wearing heat-resistant gloves as it is hot when in use.
• Do not handle or move the fire pit when in use as it is hot.
• Do not attempt to store the fire pit until all ashes and charcoals are completely extinguished.
• Always use a safety tool and heat-resistant gloves when adding or moving fuel.
• Do not leave a burning fire unattended.
• Fire hazard-Hot embers may emit while in use.
• Do not overload the fire pit with fuel. Do not add additional fuel until the fire burns down.
• If a portion of the fire bowl is growing red, it is overloaded.
• Do not burn fuel directly on the fire bowl base.
• Do keep the fuel away from the wall of the fire pit as the high temperature may damage it.
• Avoid breathing smoke from the fire and avoid getting it into your eyes.
• Always thoroughly inspect the fire pit before use.
• A slight discoloration of the finish may occur after use.

Special instructions for grills

• Do not place the food on the grill until the fuel is covered with a layer of ash!
• The appliance becomes very hot and must not be moved during operation.
• Do not use the appliance in closed rooms.
• Do not use spirit or petrol for ignition or reignition.
• Only use ignition aids under EN 1860-3.
• Keep children and pets away from the appliance.

PARTS

Hints On Assembly

• Dispose of all polythene packing carefully and keep it out of the reach of children.
• Please read the section on chiminea safety before using your chiminea.
• Please read all instructions carefully and keep the outer packaging to refer to a photograph of the finished product in case of difficulty.
• While every effort has been made by the manufacturer of your chiminea to remove any sharp edges, you should handle all components with CARE to avoid accidental injury.

ASSEMBLY

Tools required : Either a Philips crosshead or flat-bladed screwdriver and either an adjustable wrench or a pair of pliers.

1. Attach legs (4) to stove tray (6) using two screws (A) and two nuts (B) per leg.
2. Attach stove body (3) to stove tray (6) using three screws (A) and three nuts (B).
3. Attach bottom chiminea (2) to stove body (3) using three screws (A) and three nuts (B).
4. Attach chiminea ( l) to bottom chiminea (2) using three screws (A) and three nuts (B).
5. Insert log grate (5) into the base of the chiminea. The position of this can be adjusted using the Hand Tool (7).
6. Install the door (8) onto the stove body (3) when in use, and use tool (7) to open or close the door.

CLEANING AND CARE

CAUTION Danger of burns! Allow the fireplace to cool completely before inspecting or cleaning it for damage.

Inspect the fire place for damage

Check the fi replace regularly for damage to ensure product safety and a longer service life.

1. Check all parts to make sure they are tight.
2. Check the components for damage.
3. If you fi nd damage to a component, have the fire place repaired before continuing to use it.

Cleaning

• Make sure that the fire is completely extinguished when you no longer use the fire place.
• Make sure the fire is completely extinguished and the fire place has cooled down before removing the ashes.
• Use a damp cotton cloth to remove soot. Clean the fire place regularly to ensure a long service life.
• Note: The surface may discolor after repeated use.
• Do not use oven cleaner or scouring agents, as these can damage the product.
• Clean the outside with water and a mild dishwashing liquid.
• For stubborn stains, use a citrus-based cleaner and a nylon brush.

Dear Customer,

• Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damage.
• We assume no liability for damage caused by disregard of the instructions and improper use.
• Scan the QR code to get access to the latest user manual and more product information.

MANUFACTURER & IMPORTER (UK)

• Manufacturer: Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
  • Importer for Great Britain: Berlin Brands Group UK Limited
• PO Box 42
  • 272 Kensington High Street
• London, W8 6ND
  • United Kingdom

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>