BEOK TGP51 WiFi Touch Screen Thermostat Instruction Manual

BEOK TGP51 WiFi Touch Screen Thermostat

Product Summary

The digital heating liquid crystal temperature controller adopts the most advanced microcomputer control chip in the world, and detects the temperature through a high-precision sensor inside the thermostat. And in real time, compared with the temperature set by the user, the load (electric heating device or valve) is automatically turned on and off to achieve the purpose of maintaining the indoor constant temperature.

Technical Parameter

≤16A(electric heating)

Power Consumption| <0.3W
External Material| PC+ABS (flame retardant）
Sensing Element| NTC
Set Temp. Range| 5-60℃
Floor Set Temp. Range| 5-99℃
Accuracy| ±1℃
Dimension| 86x86x13.3mm
Ambient Temp.| 0-45℃,5-95％RH(Non-condensing）
Storage Temp.| -5~55℃
Timing Error| <1％

Main Functions and Characteristics

1. WIFI for Andriod & Apple iOS
2. Large screen display and touch button
3. Power-off memory function
4. Real-time data save function
5. 5+2 or 6+1or 7days six periods program schedule
6. Anti-freezing function
7. 3 sensor modes can be setting
8. Selectable 80mmx80mm European hidden box.
9. With child lock function

Button Function

• Power on/off;
• Mode button: switch manual, automatic time control, temporary manual, long press time, hour, minute, week settings.
• Upper button: temperature plus, plus parameters;
• Lower button: temperature minus, minus parameter.

Display and Function Description

• Manual control, flashing for temporary manual control, no display for automatic control
• Heating
• The first period, get up in the morning;
• The second time, go out in the morning;
• The third time, go home at noon;
• The fourth time, go out at noon;
• The fifth time, go home at night;
• The sixth period, sleep at night;
• The antifreeze function is turned on.
• Press and unlock or unlock at the same time.

Model Specific

Week Program|

Controlled Objects

---|---

TGP51WIFI-EP            16A

|

For electric heating appliances

TGP51WIFI-WP             3A

|

For water heating appliances

TGP51WIFI-WPB           3A

|

For gas boiler

User Interface Explanation

Wiring Diagram

Thermostat Operation Instruction

Setting Power on/off

Press to turn on/off the power.

Setting Temperature

Press to set the temperature.

Setting the Clock

Press to set minute, hour and week. Press for adjusting.

Setting the Manual Mode.

Manual mode means non-programmable mode. Press, then will display in the screen, it is in manual mode. Press to set the temperature. Long press to set minute, hour and week.

Setting the Child Lock

Press and at the same time in the on state, will display. Press and at the same time in the on state again, will disappear.

Setting the Programmable Mode.

Press the and at the same time in the off state. LOOP and 12345 will display. Press to select the control way: 5+2 or 6+1 or 7 days programmable. 12345 display in the position of week means 5+2; 123456 display in the position of week means 6+1;
1234567 display in the position of week means 7 days programmable. Press to Press to change the time; Press to select the periods. Press to change the temperature ; Press again to do time adjustment. will disappear in automatic control state. You can directly press to adjust temperature, This will return to manual mode. Press to switch operation between manual mode and programmable mode.

Week

| 1| | 6:00| 20℃
2| | 8:00| 15℃
3| | 11:30| 15℃
4| | 12:30| 15℃
5| | 17:30| 22℃
6| | 22:00| 15℃

Weekend

| 1| | 8:00| 22℃
2| | 23:00| 15℃

Remark:

1. The defaulted temperature of period3 and period4 is the same as period2. Please change it according to the request.
2. When setting temperature is 00, this period is power off.
3. How to check floor temp? In the power on state, long press and hold tM hen press to check floor temp., OUT TEMP will display.

Advanced Setting

In the state of power-off, long press and hold then press into advanced setting mode. Then press to set relative item.

SEN

|

Sensor mode

| 0:Internal sensor 1:Floor sensor

2:Both internal sensor and floor sensor

|

0

OSV| Set temp. range

for floor sensor

| 5-99℃| 42℃
DIF| Precision for floor temp.| 1-9℃| 2℃
SVH| High limit temp.

for internal sensor

| 5-99℃| 35℃
SVL| Low limit temp.

for internal sensor

| 5-99℃| 5℃
ADJ| Measure temp.| Check and calibrate the actual room temp.| 0.5℃accurac calibrate
FRE| Anti-frozen| 00：Close anti-frozen

01：Open anti-frozen

|

00

PON| Power memory| 00：Power memory off 01：Power memory on| 00
DFI| Precision for room temp.| 0.5-3℃| 1℃

FAC

|

Factory setting

| 10 or 32:Wifi mode open 08：Just display

00：Reset

|

08

Remark:
Antifreeze function: The thermostat is in the off state. When the indoor temperature is lower than 5 °C, the electric valve is opened. When the indoor temperature rises to 7 °C, the thermostat automatically turns off the output.
Sensor error:
Please select the right sensor mode. If select a different mode or there is error of sensor, Err will display on the LCD screen, the thermostat will stop heating till the problem is solved.
Special note:
installing cable please choose plumbing 1.5-2.5mm2 hard wire.

Phone Port Operation Instruction

Install APP on phone
For iOS system: Login in App Store, search “ Beok Home”, you can download it on your iPhone. Or scan below code to download: For Android System: Login in Google Play, search “Beok Home”, you can download it on your phone.
Or scan below code to download:

Connection Thermostat with Phone

• Hold on “M” key, then press Power key.
• Go into Advanced Setting, press “M” key 9 times until FAC mode appears.
• When FAC appears, press UP key to change from 8 to 10 or 32.
• Then, press power off.
• Hold on “M” key, then press Power key again.
• At this time, wifi symbol will be twinkling quickly and frequently. It means, you can connect thermostat with phone now. When wifi symbol stop twinkling, it means thermostat is successfully connected with phone.

Connection with Phone

• When the thermostat Wifi Symbol twinkling fast, you can start the configure on your Phone.
• Enter your wifi name and password, then start connection a t below. When connection success, it will appear “Connection Success”.
• After connection success, you need press “Search “ key.
• Then it will appear your wifi thermostat HVAC. HVAC is the factory setting name, when you have more than 2 thermostats, you can change it to any name you want.
• Long press HVAC for 5 seconds, it will appear Edit Thermostat page. Press Modify Current Thermostat. You can change HVAC to room 1, Bedroom Bath room, or anything you like.

APP Interface on the Phone

Thermostat Setting through Phone Operation

1. Clock: You can press Time Matching switch to match your phone clock with the thermostat clock.
2. Children lock (screen locking) : Press to lock the thermostat.
3. Anti-Freezing: Press thermostat will show means Anti-freezing function open.
4. Temperature setting: You can directly drag the pointe Temperature Setting Dial to set temperature. Or press and temperature step.
5. Period setting: Long press Period Display, you will go into the Period Setting mode: Touch work loop: you can choose the week program mode: 5+2/ 6+1 /7. Touch each time value: you can set the time of the period. Touch each temperature: you can set the temperature of the period. Notice: When you choose the program mode to 7, the Weekend program data set will no appear.
6.  Advanced Setting: Long Press Senior setting mode:
7. 7. Switch of Manual mode and Auto mode: Press mode or Auto mode.
8. 8. Power off : Press to turn on or off the thermostat.

Attention to Phone WiFi Connection

1. After you press Configure, if the connection fails:
   a. Please confirm your mobile phone is set to WLAN mode, and ensure its (mobile data)3g/4g is turned off. Please connect to 2.4G wifi, not 5G wifi.
   b. Please add your wifi router name, we recommend it does not include spaces or Chinese symbols.
   c. Please check your wifi router password. We recommend not over 32 characters, no spaces, no blank password, no special symbols except letters and numbers.
   d. Please check module is successfully reset . In the power-off state, press the Time key first, then press the Power key to enter Advanced Setting. Find FAC mode, to change FAC to 10 or 32, then turn the thermostat off Press Time key within 2 minutes, then press Power key again. This time, it will not enter Advanced Setting, but the WIFI symbol on the LCD screen will be flashing quickly and frequently. This means wifi module has been reset successfully. Then wait for APP to connect well.
   e. Please confirm wifi password is correctly filled. We recommend you check the password to be visible when it is input.

2. . If it displays the following reminder, please go to Advanced Setting to reset the corresponding setting.

Installation Instruction

This product is suitable for standard 80*80mm wall box and 60 mm European round boxes.

1. Open the main control board, use a 3.5mm wide vertebral slope to reach the depth of 4mm in the card slot, and lift it up slightly to open the hook.
2. Remove the back cover and power supply, wire it correctly according to the wiring diagram, and fix the back cover to the cassette with M4 screws.
3. Connect the lower cover cable to the upper cover board
4. Hang the upper two hooks at a 30-degree angle. Press the two corners below the thermostat slightly to lock the upper casing and the installation is complete.

NOTICE: Please strictly follow the wiring diagram and do not let the water, mud and other debris enter the thermostat, otherwise the thermostat will be damaged!

ATT

Thank you for buying this product!
Please read this manual for complete instructions on installing and operating your thermostat. If you require further assistance, please feel free to contact us.

In the box you will find:

√

External sensor| √| |

Our Service

We offer a warranty of 24 months from the sales day. During the warranty, if it belongs to the quality issue, we will fix or replace them for you by free after test them. If it is not quality problem or beyond the warranty time, we will charge for the after-sales service.

Warning:

The symbol means the unit is being installed, it may cause electrical shock hazards during maintaining, so please make sure it is operated by the professional technical worker

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>