BEOK JMY-R8C-703 RGB Colorful LCD Screen Smart Thermostat Instruction Manual
- June 6, 2024
- BEOK
Table of Contents
- Parameter
- Product Overview
- Display Symbols
- Temperature Control Mode (Floor Heating/Integrated)
- User Operation
- Auto-mode Setting
- Advanced Setting (Usually for Professional Technicians)
- Sensor failure
- Timer Task Setting (Fan Coil/Integrated)
- Dimensions (Unit: mm)
- Mounting Steps
- Connecting Diagram
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BEOK JMY-R8C-703 RGB Colorful LCD Screen Smart Thermostat
✓ Scan QR code to finish network configuration swiftly, easy and
convenient.
✓ Programmable device, multiple periods allowed to set per day.
✓ 2.8 inches ultra-large colorful LCD screen, delicate visual effect.
✓ The device can be controlled by voice through Amazon Alexa and Google
Assistant
Parameter
| Supply voltage | AC100~240V;50~60Hz |
|---|---|
| Power consumption | 1W Max (Wi-Fi 3W Max) |
| Temp. setting range | 5~95℃ |
| Floor limited range | 20~90℃ |
| On/off deviation | 0.5~10℃, Factory setting ±1℃ |
| Ambient temperature | -5~50℃ |
| Protection level | IP20 |
| Shell materia | Anti-Flammable PC |
Product Overview
This series of thermostat has Floor Heating, Fan Coil, and Integrated version, meeting the requirements under different scenarios.
| Version | System mode | Model | Application |
|---|---|---|---|
| Floor heating | Heating | EP | Built-in & floor sensor, floor limit sensor + Weekly |
programming
WP| A NC/NO dual-output + Weekly programming
WPB| A NC/NO dual-output + Weekly programming+ Potential-free output
Fan Coil| Heating /Cooling / Ventilation| Ac2| Timer task + 2-pipe system
Ac2- 485| Timer task + 2-pipe system + 485Modbus (optional)
Ac4| Timer task + 4-pipe system + 485Modbus (optional)
Integrated| Heating / Cooling / Ventilation/Floor heating / Floor heating +
Heating| AWY| Floor heating & fan coil, weekly programming + Potential-free
output + Timer task + 485Modbus (optional) + Door card (optional)
Display Symbols
Temperature Control Mode (Floor Heating/Integrated)
Auto Mode
Weekly-circled programme, up to 6 heating events can be set per day.
Heating events, workdays and temperature can be separately customized based on
personal routines.
Manual Mode
Thermostat works based on manually-set temperature, disconnecting from auto
mode.
Temporary Mode
Thermostat works based on manually-set temperature temporarily and then shifts
back to auto mode till next event.
User Operation
| Power on/off : | Long press “ ” to turn on/off the thermostat |
|---|---|
| Temp setting: | Rotate handwheel “ ”to change setting temperature by 0.5°C. |
| System mode: | Press “ M ” shortly to switch cooling/heating/ventilation. |
(Fan Coil)
Press “ M ” shortly to switch cooling/heating/ventilation/floor
heating/floor heating + heating. (Integrated)
Temp control mode:| Press “ M ” shortly to switch manual/auto mode.
(Floor heating)
Press “ ” shortly to switch manual/auto mode. (Integrated, floor heating)
Enter menu:| Press “ ” enter the menu interface
Child-lock:| Press “ M ” + “ ” for 3 seconds to activate child-lock.
Auto-mode Setting
When device is off, press “ ” to enter menu page, choose “period setting” to set parameters, then press “ ” to save and exit.
Events
|
Time
| Temperature
---|---|---
Default value| Modify| Default value|
Modify
Workdays| Sunrise| 06 : 00| Rotate handwheel| 20℃| Rotate handwheel
Morning| 08 : 00| 15 ℃
Nooning| 11 : 30| 15 ℃
Afternoon| 12 : 30| 15 ℃
Evening| 17 : 00| 22 ℃
Night| 22 : 00| 15 ℃
Weekends| Sunrise| 06 : 00| 20℃
Night| 22 : 00| 15 ℃
Advanced Setting (Usually for Professional Technicians)
Choose “advanced setting” on menu page and put in password 123456 to enter advanced setting page, set parameters then press “ ” to save and exit.
| Meaning | Rotate handwheel | Default value |
|---|---|---|
| Sensor Mode | Built-in Sensor |
Floor Sensor
Built-in Control & Floor Limitation| IN
Buit-in Sensor Calibration| -5~5℃| -3℃
Buit-in Max Setting Value| 5~95℃| 50℃
Floor Max Setting Value| 10~95℃| 50℃
Limitation Value| 20~95℃| 35℃
Output Jitter Control| 0~5℃| 1℃
Anti-Freeze Protection| ON/OFF| OFF
Linkage Mode| Non-inverting
Inverting Inverting
Inverting and Anti-Freeze closed| Non-inverting
Linkage Time Delay| 0~5 Min| 0 Min
Weekday Mode| Monday to Friday/Monday to Saturday /Monday to Sunday/| 2-day
Boot Type| Function Off/Function On/Function Saved| O F F
Temperature Unit| ℉/℃| ℃
Child Lock Type| None
Lock All
All but power| None
Control Mode| All/Air/Floor| Floor
Cloud Region| CN/US/EU| CN
Reset All Settings| /| /
Sensor failure
Please select work mode of sensors correctly. When it shows E0/E1 error,
thermostat will stay power-off till the error is eliminated.E0: built-in
sensor is short-circuited or disconnected.
E1: floor sensor is short-circuited or disconnected.
Timer Task Setting (Fan Coil/Integrated)
Press“ ”to enter the menu page. Turn the knob“ ”, choose “Auto Mode”, and then
choose “Schedule”. Set the parameters by turning the knob, then press “Home”
to save and exit to home page.
Dimensions (Unit: mm)
Mounting Steps
The thermostat adopt pre-guide and limited snap-fit design. It is easy to
mount.
1）Release front cover by inserting a head screw-driver into bottom crack.
2）Insert the wires and then fix these wires with screws. Suggested
wire-stripping length is 7-9mm.
3）Mount backing plate into wall-cassette, put screws and then fix thermostat.
Make sure that the thermostat is fixed without deformation. Suggested torque
is 0.2~0.4N.m (2.0~4. 1kgf.cm).
4）Re-mount the front cover via snap-fit connection.
Connecting Diagram
The thermostat operates in full capacity in areas with the altitude of less than 2500 above sea level. Power rating of external load should be less than or equal to 80% rated power of the thermostat in areas with altitude of 2500m to 4200m.
