MEAN WELL EPP-100 100W Single Output with PFC Function Instruction Manual
- June 4, 2024
- MEAN WELL
Table of Contents
100W Single Output with PFC Function
EPP-100 series
■ Features:
- 4″x2″ Compact size
- Universal AC input / Full range
- Built-in active PFC function
- High efficiency up to 92.5%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- 75W free air convection, 100W with 20CFM forced air
- LED indicator for power on
- No load power consumption<0.5W
- Built-in 12V/0.3A auxiliary output
- 3 years warranty
SPECIFICATION
MODEL| EPP-100-12| EPP-100-15| EPP-100-24|
EPP-100-27| EPP-100-48
---|---|---|---|---|---
OUTPUT| DC VOLTAGE| 12V| 15V| 24V| 27V| 48V
RATED CURRENT (convection)| 6.3A| 5A| 3.2A| 2.8A| 1.6A
RATED CURRENT (20CFM FAN)| 8.5A| 6.67A| 4.2A| 3.71A| 2.1A
CURRENT RANGE (convection)| 0 ~ 6.3A| 0 ~ 5A| 0 ~ 3.2A| 0 ~ 2.8A| 0 ~
1.6A
CURRENT RANGE (20CFM FAN)| 0 ~ 8.5A| 0 ~ 6.67A| 0 ~ 4.2A| 0 ~ 3.71A| 0 ~
2.1A
RATED POWER (convection)| 75.6W| 75W| 76.8W| 75.6W| 76.8W
RATED POWER (20CFM FAN)| 102W| 100.05W| 100.8W| 100.17W| 100.8W
RIPPLE & NOISE (max.) Note.2| 120mVp-p| 150mVp-p| 240mVp-p| 240mVp-p|
300mVp-p
VOLTAGE ADJ. RANGE| 11.76 ~ 12.6V| 14.7 ~ 15.75V| 23.52 ~ 25.2V| 26.46 ~
28.35V| 47.04 ~ 50.4V
VOLTAGE TOLERANCE Note.3| ±2.0%| ±2.0%| ±1.0%| ±1.0%| ±1.0%
LINE REGULATION| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%
LOAD REGULATION| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%
SETUP, RISE TIME| 1000ms, 30ms/230VAC 2000ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.)| 16ms/230VAC 16ms/115VAC at full load
INPUT| VOLTAGE RANGE Note.5| 90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE| 47 ~ 63Hz
POWER FACTOR (Typ.)| PF>0.95/230VAC PF>0.98/115VAC at full load
EFFICIENCY (Typ.)| 91%| 91%| 92%| 92.5%| 92.5%
AC CURRENT (Typ.)| 1.4A/115VAC 0.7A/230VAC
INRUSH CURRENT (Typ.)| COLD START 70A/230VAC
LEAKAGE CURRENT| <2mA/240VAC
PROTECTION| OVER LOAD| 105 ~ 145% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is
removed
OVER VOLTAGE| 13.2 ~ 15.6V| 16.83 ~ 19.5V| 27.7 ~ 31.5V| 30.2 ~ 34.05V|
51.3 ~ 62.7V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE| 110℃±10℃ (RTH2),110℃±5℃ (TSW2)
Protection type : Shut down o/p voltage, re-power on to recover
FUNCTION| AUXILIARY POWER(AUX)| [email protected] for
driving a fan, tolerance ± 10% at main output 100% load
ENVIRONMENT| WORKING TEMP.| -30 ~ +70℃ (Refer to “Derating Curve”)
WORKING HUMIDITY| 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 45℃)
OPERATING ALTITUDE Note.6| 2000 meters
VIBRATION| 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X,
Y, Z axes
SAFETY & EMC (Note 4)| SAFETY STANDARDS| UL62368-1, TUV BS
EN/EN62368-1, EAC TP TC 004 approved
WITHSTAND VOLTAGE| I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE| I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 500VDC
/ 25℃/ 70% RH
EMC EMISSION| Compliance to BS EN/EN55032 (CISPR32) Class B, BS
EN/EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, heavy
industry level, criteria A, EAC TP TC 020
OTHERS| MTBF| 249.6Khrs min. MIL-HDBK-217F (25℃)
DIMENSION| 101.650.829mm (LWH)
PACKING| 0.2Kg; 72pcs/15.4Kg/0.82CUFT
NOTE|
- All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
- Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
- Tolerance : includes set up tolerance, line regulation and load regulation.
- The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
- Derating may be needed under low input voltages. Please check the derating curve for more details.
- The ambient temperature derating of 3.5’C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft).
Product Liability Disclaimer : For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
■ Mechanical Specification
Unit:mm
AC Input Connector (CN1) : JST B3P-VH or equivalent
| Pin No. | Assignment | Mating Housing | Terminal |
|---|---|---|---|
| 1 | AC/L | JST VHR or equivalent | JST SVH-21T-P1.1 or equivalent |
| 2 | No Pin | ||
| 3 | AC/N |
: Grounding required
DC Output Connector (CN2) : JST B4P-VH or equivalent
| Pin No. | Assignment | Mating Housing | Terminal |
|---|---|---|---|
| 1,2 | DC COM | JST VHR or equivalent | JST SVH-21T-P1.1 or equivalent |
| 3,4 | +V |
FAN Connector(CN105) : JST B2B-PH-K-S or equivalent
| Pin No. | Assignment | Mating Housing | Terminal |
|---|---|---|---|
| 1 | +12V | JST PHR-2 or equivalent | JST SPH-002T-P0.5S or equivalent |
| 2 | DC COM |
■ Block Diagram
PFC fosc : 47KHz
PWM fosc : 65KHz
■ Output Derating
■ Output Derating VS Input Voltage
File Name:EPP-100-SPEC 2021-09-15