erbesi Lettino Mini Cot Line Installation Guide

erbesi Lettino Mini Cot Line

ABOUT COMPANY

• ERBESI snc
• Via Roma 53
• 33048 Chiopris Viscone UD Italy
• T +39 0432 991327
• F +39 0432 991083
• www.erbesi.it

IMPORTANT: KEEP FOR FUTURE REFERENCE READ CAREFULLY

• WE SUGGEST TO CONTROL CAREFULLY ALL ELEMENTS BEFORE THE ASSEMBLING AND TO FOLLOW CAREFULLY INSTRUCTIONS.
• COMPANY WILL NOT SUBSTITUTE FOR FREE ITEMS ASSEMBLED EVEN IF ELEMENTS WERE FOUND BROKEN,
  OR IF THE DAMAGE IS COUSED FROM WRONG ASSEMBLING OR WRONG USE OF THE ITEM

safety regulations

This item conforms to the safety regulations

• The company is NOT responsible for any damage caused as a result of incorrect assembly. In order to properly assemble
• Failure to assemble the armoire in the manner recommended could make the armoire hazardous.
• Since the lowest position of the base is the safest, use it as soon as the baby is at an age when he can sit up.
• It is dangerous to leave something in the crib that could represent a foot-hold, a base for jump out of the crib or constitute a suffocation or strangulation hazard for the child.
• Do NOT insert into the crib more than one mattress.
• The assembly devices must always be properly tightened. Regularly check to make sure that the screws are properly tightened; if NOT, tighten them to avoid snagging or hooking (clothing, chain, etc.) as this could constitute a strangulation hazard.
• Do NOT put the crib near a heat source (gas or electrical
• Please do NOT use the crib if one or more parts are damaged or broken.
• The use of this product is allowed with beds and/or mattresses with straight sides only. It is forbidden the use of this product with rounded beds or water mattresses.
• When crib is connected to adult’s bed, in order to prevent  base (net or slats) using safety lashing straps that must be fastened and the wheels must be locked with the brake.
• When crib is connected to adult’s bed, always make sure to mount it on the long side of the bed.
• DO NOT install the product at the head or feet of the bed.
• When the crib is connected to adult’s bed, the height of the crib must be lower than the parents mattress .
• The mattress selected must be such that the inner height (that is the distance between the surface of the mattress and the top of the bed) is at least 500 mm in the lowest position of the base and at least 200 mm in the highest position.
• The maximum distance between the mattress and sides must be less than 30 mm.
• Use only spare parts approved by the manufacturer. cloth.
• To avoid the child fall risk do NOT use the crib when the child grows up and could climb over the sides.

Part List

ASSEMBLING INSTRUCTION

ATTENTION!

• Crib’s mattress base has 8 height positions available.
• If the crib is connected to adult’s bed (see n° 5) check that the height of the crib’s mattress base (mattress included) must be lower than adult’s mattress.

Connection of the crib to adult’s bed

SAFETY INSTRUCTION

• The crib must be fastened to the frame of the parents’ bed or to the mattress support (mesh or slat sprung base).
• Crib’s mattress must be lower than adult’s mattress.
• Safety lashing straps must be fastened to adult’s bed and wheels must be blocked with brake.
• It is possible to unfasten the crib from adult’s bed to ease up cleaning matters.
• When you connect again the crib to adult’s bed, make sure to fasten safety lashing straps and the wheels are blocked with brake.

Part list description

Plastic

Documents / Resources

| erbesi Lettino Mini Cot Line [pdf] Installation Guide
Lettino Mini Cot Line, Lettino, Mini Cot Line, Mini Cot, Cot
---|---

References

• Erbesi – Storie di bimbi felici

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>