ZURN 450DA Double Check Detector Instruction Manual
- June 13, 2024
- ZURN
Table of Contents
ZURN 450DA Double Check Detector Instruction Manual
Application
Designed for installation on water lines in fire protection systems to protect against both backsiphonage and backpressure of polluted water into the potable water supply. Assembly shall provide protection where a potential health hazard does not exist.
Standards Compliance
(Unless otherwise noted, applies to sizes 4” thru 10″)
- ASSE® Listed 1048
- CSA® Certified B64.5 (4″ & 6″)
- AWWA Compliant C 510, and C550
- UL® Classified
- C-UL® Classified
- FM® Approved
- NYC MEA 26-00-M VOL 3
- Approved by the Foundation for Cross Connection Control and Hydraulic Research at the University of Southern California
- Meets the requirements of NSF/ANSI/CAN 61*
- (0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT)
Materials
Main valve body Ductile Iron ASTM A 536 Grade 4
Access covers Ductile Iron ASTM A 536 Grade 4
Coatings FDA Approved fusion epoxy finish
Fasteners Stainless Steel, 300 Series
Elastomers EPDM (FDA approved)
Buna Nitrile (FDA approved)
Polymers NORYL™
Springs Stainless Steel, 300 series
Features
Sizes: 4″, 6″ , 8″, 10″
Maximum working water pressure : 175 PSI
Maximum working water temperature: 140°F
Hydrostatic test pressure: 350 PSI
End connections (Grooved for steel): AWWA C606
(Flanged): ANSI B16.42
Class 150
Options
(Suffixes can be combined)
- with OS & Y gate valves (standard)
- L – less shut-off valves (grooved body connections)
- LM – less water meter
- with gpm meter (standard)
- CFM – with cu ft/min meter
- G – with groove end gate valves
- FG – with flanged inlet gate connection and grooved outlet gate connection
- FSC – with epoxy coated wye type strainer (flanged only)
- BG – with grooved end butterfly valves with integral supervisory switches
- BF – with flanged end butterfly valves with integral
- supervisory switches
- PI – with Post Indicator Gate Valve
Accessories
- Repair kit (rubber only)
- Thermal expansion tank (Model XT)
- Valve setter (Model FLS or MJS or MJFS)
- Gate valve tamper switch (OSY-40)
- QT-SET Quick Test Fitting Set
Dimensions & Weights (do not include pkg.)
| MODEL 450DA SIZE | WEIGHT |
|---|---|
| LESS SHUTOFF VALVES | OS&Y GATE (GXF) |
BFLY (GXG)
in.| mm| lbs.| kg| lbs.| kg| lbs.| kg| lbs.| kg| lbs.| kg
4| 100| 105| 48| 295| 134| 271| 123| 175| 79| 153| 69
6| 150| 174| 79| 474| 215| 452| 205| 278| 126| 248| 112
8| 200| 402| 182| 878| 398| 824| 374| 592| 269| 546| 248
10| 250| 420| 191| 1076| 488| 1018| 462| 694| 315| 636| 288
MODEL 450DA SIZE| DIMENSIONS (approximate)
---|---
A| B WITH GATEVALVES| B WITH BFLYVALVES| B LESS GATEVALVES| C OS&Y OPEN| C
OS&YCLOSED| C WITH BFLYVALVES| D
in.| mm| in.| mm| in.| mm| in.| mm| in.| mm| in.| mm| in.| mm| in.| mm| in.|
mm
4| 100| 18 5/16| 465| 30| 762| 27 3/4| 705| 21| 533| 22 3/4| 578| 18 1/4| 460|
9| 229| 8| 203
6| 150| 18 11/16| 475| 35 1/2| 902| 32 1/8| 816| 25| 635| 30 1/8| 765| 23 3/4|
603| 10 1/4| 260| 10| 254
8| 200| 29| 737| 46| 1168| 42 9/16| 1081| 34 7/16| 845| 37 3/4| 959| 29 1/4|
743| 12| 305| 13| 330
10| 250| 29| 737| 47 1/2| 1207| 47 1/2| 1207| 34 7/16| 845| 45 3/4| 1162| 35
3/8| 899| 13| 330| 13| 330
Zurn Industries, LLC | Wilkins
1747 Commerce Way, Paso Robles, CA U.S.A. 93446 Ph.
855-663-9876, Fax
805-238-5766
In Canada | Zurn Industries Limited
7900 Gateway Drive, Unit 10, Brampton, Ontario L6T 5W6,
877-892-5216
www.zurn.com
Rev. J
Date: 12/22
Document No. BF-450DA
Product No. Model 450DA
Patent zurn.com/patents
Flow Characteristics
MODEL 450DA 4″ & 6″ (STANDARD & METRIC)
MODEL 450DA 8″ & 10″ (STANDARD & METRIC)
Typical Installation
Local codes shall govern installation requirements.
To be installed in accordance with the manufacturer’s instructions and the latest edition of the Uniform Plumbing Code. Unless otherwise specified, the assembly shall be mounted above adequate drains with sufficient side clearance for testing and maintenance. The installation shall be made so that no part of the unit can be submerged.
Capacity thru Schedule 40 Pipe (GPM)
Pipe size| 5 ft/sec| 7.5 ft/sec| 10 ft/sec| 15 ft/sec
2 1/2″| 75| 112| 149| 224
3″| 115| 173| 230| 346
4″| 198| 298| 397| 595
6″| 450| 675| 900| 1351
8″| 780| 1169| 1559| 2339
10″| 1229| 1843| 2458| 3687
OUTDOOR INSTALLATION
| **** MODEL SIZE | DIMENSIONS (approximate) | |
|---|---|---|
| A1 SETTER END TO END FLS | A1 SETTER END TO END MJS | |
| in. | mm | in. |
| 4 | 100 31 | 5/16 |
| 6 | 150 | 34 3/4 |
| 8 | 200 | 47 |
| 10 | 250 | 51 |
Specifications
The Double Check Detector Backflow Preventer shall be certified to NSF/ANSI/CAN 61, ASSE® Listed 1048 and supplied with full port OS & Y gate valves. The main body and access cover shall be epoxy coated ductile iron (ASTM A 536 Grade 4), the seat ring and check valve shall be NORYL™, the stem shall be stainless steel (ASTM A 276) and the seat disc elastomers shall be EPDM. The checks shall be accessible for maintenance without removing the device from the line. The Double Check Detector Backflow Preventer shall be a ZURN WILKINS Model 450DA.
Zurn Industries, LLC | Wilkins
1747 Commerce Way, Paso Robles, CA U.S.A. 93446 Ph.
855-663-9876, Fax
805-238-5766
In Canada | Zorn Industries Limited
7900 Gateway Drive, Unit 10, Brampton, Ontario L6T 5W6,
877-892-5216
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>