BEOK TCR8WIFI RGB Colorful LCD Screen Smart Thermostat Instruction Manual

BEOK TCR8WIFI RGB Colorful LCD Screen Smart Thermostat

Product Overview

This series of thermamost has Floor Heating, Fan Cal, and integrated vision, meeting the requirement under different sonerios

Floor heating

|

Heating

| EP| Built-in & floor sensor, floor limit sensor+ Weekly programming
WP| A NC/NOdual-output+ Weekly programming
WPB| A NC /NO dual-output+ Weekly programming+ Potential-free output

Fan Coil

|

Heating /Cooling/

Ventilation

| Ac2| Timer task+ 2-pipe system
Ac2-

485

| ‘Timer task + 2-pipe system+ 485Modbus (optional)
Ac4| ‘Timer task + 4-pipe system+ 485Modbus (optional)

Integrated

| Heating/ Cooling/ Ventilation/Floor heating / Floor heating+ Heating| AWY| Floor heating & fan coil, weekly programming + Potential-free output + Timer task  + 485Modbus (optional)+ Door card (optional)

Display Symbols

Temperature Control Mode(Floor Heating/Integrated)

• Auto Mode
  Weekly-DRC:ted program, up to 6 heating events can be set per day. Heading events, workdays and temperature can be separately customized based on personal routines.

• Manual Mode
  The thermostat works based on manually-set temperature, disconnecting from auto mode.

• Temporary Mode
  Thermostat wor1al based on manually-set temperature temporarily and tllen shifts beck to auto mode till next event.

User Operation

• Power on/off: Press login button shortly to tum on/off the thermostat.
• Temp setting: Relate handwheel’ button ‘to change the set temperature by 0.5’C.
• system Mode: Presa • M • shortly to switch cooling/heating/ventilation. (Fan Coll)
  • press M shortly to switch CDOlinglheeting/venliletionlftoor heating/ floor healing+ healing. (lnlagralad)
• Temp control mode: Prass• M • shortly ID swild1 manual/auto mode. (Floor heating)
  • Prass  •FAN button• shortly ID swild1 manual/auto mode. (lnlllgral8d, floor heating)
• Enter menu: Press “Menu button ” enter the menu interface.
• Child-lock:  Press M” + “ menu button ” for 3 seconds to activate child-lock.

Auto-mode Setting
When device i& off, press • Menu button• to enlarge menu page, choose “period setting” to set parameters, then press “ login button ” to save and exit.

Advanced Setting (Usually for Professional Technicians)
Choose “advanced 8811ing’ on menu page and put in p868WOl’d 123456 to enter the advanced selling page, set parameters then press ·login button· to save and exit

Sensor Mode

| Built-in Sensor Floor Sensor

Built-in Control&Floor Limitation

|

IN

Burt-in Sensor Calibration| -5-5°C| – 3 °C
Burt-inMaxSettingValue| 5- 95 “C| 50 °C
Floor Max Setting Value| 10- 95 °C| 50 °C
Limitation Value| 20- 95 °C| 35 °C
Output Jitter Control| 0- 5 °C| 1 °C
Anti-Freeze Protection| ON/ OFF| OFF

Linkage Mode

| Non inverting Inverting Inverting

Inverting and Anti-Freeze closed

|

Noninverting

Linkage lime Delay| 0-5Min| 0Min

Weekday Mode

| Monday to Friday/Monday to Saturday

/Mondyato Sunday/

|

2-day

Boot Type| Function Off/Function On/Function Saved| OFF
Temperature Unit| °F /° C| “C

Child Lock Type

| None Lock All

All but power

|

None

Control Mode| All/Air/Floor| Floor
Cloud Region| CN / US / EU| CN
Reset All Settings| I| I

RGB Colorful LCD Screen Smart Thermostat

• Scan QR code to finish network configuration swiftly, easily and conveniently.
• The programmable device, multiple periods allowed to set per day.
• 2.8 inches ultra-large colorful LCD screen, delicate visual effect.
• The device can be controlled by voice through Amazon Alexa and Google Assistant

Parameter

• Supply voltage AC100~240V;50~60Hz
• Power consumption 1W Max (Wi-Fi 3W Max)
• Temp. setting range 5~95℃
• Floor limited range 20~90℃
• On/off deviation 0.5~10℃, Factory setting ±1℃
• Ambient temperature -5~50℃
• Protection level IP20 Anti-Flammable PC

Sensor failure
Please select work mode of sensors correctly. When It shows EO/E1 error, the thermostat will stay power-off till the error is eliminated.ED: the built-in sensor is short-circuited or disconnected. E1: floor sensor is short-circuited or disconnected.

Timer Task Setting (Fan Coil/Integrated) Press” menu button “to enter the menu. Tum the knob” wheel button”, choose “Auto Mode”, and then choose “Schedule”. Set the parameters by turning the knob, then press” gg • to save and exit to home page

Dimensions (Unit: mm)

Mounting Steps
The thermostat adopts a pre-guide and limited snap-fit design. It is easy to mount.

1. Release the front cover by inserting a head screw-driver into the bottom crack.
2. Insert the wires and then fix these wires with screws. The suggested wire-stripping length is 7-9mm.
3. Mount backing plate into wall-cassette, put screws and then fix the thermostat. Make sure that the thermostat is fixed without deformation. Suggested torque is 0.2-0.4N.m (2.0-4. 1kgf.cm).
4. Re-mount the front cover via snap-fit connection.

Connecting Diagram

The thermostat operates in full capacity in areas with the altitude of less than 2500 above sea level. Power rating of external load should be less than or equal to 80% rated power of the thermostat in areas with altitude of 2500m to 4200m.

Floor Heating

Fan Coil

Integrated

Documents / Resources

| BEOK TCR8WIFI RGB Colorful LCD Screen Smart Thermostat [pdf] Instruction Manual
TCR8WIFI, RGB Colorful LCD Screen Smart Thermostat, TCR8WIFI RGB Colorful LCD Screen Smart Thermostat
---|---
| BEOK TCR8WIFI RGB Colorful LCD Screen Smart Thermostat [pdf] Instruction Manual
TCR8WIFI, RGB Colorful LCD Screen Smart Thermostat, TCR8WIFI RGB Colorful LCD Screen Smart Thermostat

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>