BEOK TCR7 Series RGB Colorful LCD Screen Smart Thermostat Instruction Manual
- June 6, 2024
- BEOK
Table of Contents
BEOK TCR7 Series RGB Colorful LCD Screen Smart Thermostat
Product Overview
This series of thermamost has Floor Heating, Fan Cal, and integrated vision, meeting the requirement under different sonerios
| Version | System mode | Model | Application |
|---|
Floor heating
|
Heating
| EP| Built-in & floor sensor, floor limit sensor+ Weekly programming
WP| A NC/NOdual-output+ Weekly programming
WPB| A NC /NO dual-output+ Weekly programming+ Potential-free output
Fan Coil
|
Heating /Cooling/
Ventilation
| Ac2| Timer task+ 2-pipe system
Ac2-
485
| ‘Timer task + 2-pipe system+ 485Modbus (optional)
Ac4| ‘Timer task + 4-pipe system+ 485Modbus (optional)
Integrated
| Heating/ Cooling/ Ventilation/Floor heating / Floor heating+ Heating| AWY| Floor heating & fan coil, weekly programming + Potential-free output + Timer task + 485Modbus (optional)+ Door card (optional)
Display Symbols
Temperature Control Mode(Floor Heating/Integrated)
-
Auto Mode
Weekly-DRC:ted program, up to 6 heating events can be set per day. Heading events, workdays and temperature can be separately customized based on personal routines. -
Manual Mode
The thermostat works based on manually-set temperature, disconnecting from auto mode. -
Temporary Mode
Thermostat wor1al based on manually-set temperature temporarily and tllen shifts beck to auto mode till next event.
Parameter
- Supply voltage AC100~240V;50~60Hz
- Power consumption 1W Max (Wi-Fi 3W Max)
- Temp. setting range 5~95℃
- Floor limited range 20~90℃
- On/off deviation 0.5~10℃, Factory setting ±1℃
- Ambient temperature -5~50℃
- Protection level IP20 Anti-Flammable PC
User Operation
- Power on/off: Press 18 shortly to tum on/off the thermostat.
- Temp setting: Relate handwheel’ O ‘to change the set temperature by 0.5’C.
- system article: Presa • ~ • shortly to switch cooling/heating/ventilation. (Fan Coll)
- press 18 shortly to switch CDOlinglheeting/venliletionlftoor heating/ floor healing+ healing. (lnlagralad)
- Enter menu: Press ‘Q ‘ enter the menu Interface.
- Temp control mode: Prass• 83 • shortly ID swild1 manual/auto mode. (Floor heating)
- Prass• 1′ • shortly ID swild1 manual/auto mode. (lnlllgral8d, floor heating)
- Child-lock: Press’ M ‘+ • gg “f0r 3 se,;onds to ac:tlvate child-lock.
Auto-mode Setting
When device i& off, press • O • to enlarge menu page, choose “period selling’ ID set pa, monetary, then pr9SS ‘C) • to -and axil.
Events
| Time| Temperature
---|---|---
Default value| Modify| Default value| Modify
Workdays
| Sunrise| 06:00|
0
;:a
i
CT
OJ
:J
:C;.;
CT
ffi.
| 20°C|
0
;:a
i
CT
OJ
:J
:C;.;
CT
ffi.
Morning| 08 :00| 15 °C
Nooning| 11 :30| 15 °C
Afternoon| 12:30| 1 5 °C
Evening| 17 :00| 2 2 °c
Night| 22 :00| 15 °C
Weekends
| Sunrise| 06 : 0 0| 2 0 ° C
Night| 22 :00| 15 °C
Advanced Setting (Usually for Professional Technicians)
Choose “advanced 8811ing’ on menu page and put in p868WOl’d 123456 to enter
advanced selling page, set parameters then press ·o· to save and exit
| Meaning | 0 Rotate handwheel | Default value |
|---|
Sensor Mode
| Built-in Sensor Floor Sensor
Built-in Control&Floor Limitation
|
IN
Burt-in Sensor Calibration| -5-5°C| – 3 °C
Burt-inMaxSettingValue| 5- 95 “C| 50 °C
Floor Max Setting Value| 10- 95 °C| 50 °C
Limitation Value| 20- 95 °C| 35 °C
Output Jitter Control| 0- 5 °C| 1 °C
Anti-Freeze Protection| ON/ OFF| OFF
Linkage Mode
| Non inverting Inverting Inverting
Inverting and Anti-Freeze closed
|
Noninverting
Linkage lime Delay| 0-5Min| 0Min
Weekday Mode
| Monday to Friday/Monday to Saturday
/Mondyato Sunday/
|
2-day
Boot Type| Function Off/Function On/Function Saved| OFF
Temperature Unit| °F /° C| “C
Child Lock Type
| None Lock All
All but power
|
None
Control Mode| All/Air/Floor| Floor
Cloud Region| CN / US / EU| CN
Reset All Settings| I| I
RGB Colorful LCD Screen Smart Thermostat
Sensor failure
Please select work mode of sensors correctly. When It shows EO/E1 error, the
thermostat will stay power-off till the error is eliminated.ED: the built-in
sensor is short-circuited or disconnected. E1: floor sensor is short-circuited
or disconnected.
Timer Task Setting (Fan Coil/Integrated) Press” Q “to enter the menu. Tum the knob” Q “, choose “Auto Mode”, and then choose “Schedule”. Set the parameters by turning the knob, then press” gg • to save and exit to home page
Dimensions (Unit: mm)
Mounting Steps
The thermostat adopts a pre-guide and limited snap-fit design. It is easy to
mount.
- Release the front cover by inserting a head screw-driver into the bottom crack.
- Insert the wires and then fix these wires with screws. The suggested wire-stripping length is 7-9mm.
- Mount backing plate into wall-cassette, put screws and then fix the thermostat. Make sure that the thermostat is fixed without deformation. Suggested torque is 0.2-0.4N.m (2.0-4. 1kgf.cm).
- Re-mount the front cover via snap-fit connection.
Connecting Diagram
The thermostat operates in full capacity in areas with the altitude of less than 2500 above sea level. Power rating of external load should be less than or equal to 80% rated power of the thermostat in areas with altitude of 2500m to 4200m.
Floor Heating
Fan Coil
Integrated
Documents / Resources
| BEOK
TCR7 Series RGB Colorful LCD Screen Smart
Thermostat
[pdf] Instruction Manual
tcr7-wifi-ep, tcr7-wifi-wp, tcr7-ep, tcr7-wp, tcr7-wifi-wpb, tcr7-wpb, tcr7
-wifi-ac2, tcr7-ac2 tcr7-wifi-ac2-485, tcr7-ac2-485, tcr7-wifi-ac4, tcr7-ac4,
TCR7 Series RGB Colorful LCD Screen Smart Thermostat, TCR7 Series, RGB
Colorful LCD Screen Smart Thermostat
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>