PARKSIDE PAP 20 B1 20V 2Ah Battery Instruction Manual

: June 6, 2024
: PARKSIDE

PARKSIDE PAP 20 B1 20V 2Ah Battery Instruction Manual

Introduction

Congratulations on the purchase of your new device. With it, you have chosen a high quality product.
During production, this equipment has been checked for quality and subjected to a final inspection. The functionality of your equipment is therefore guaranteed.

The operating instructions constitute part of this product. They contain important information on safety, use and disposal. Before using the product, familiarize yourself with all of the operating and safety instructions. Use the product only as described and for the applications specified. Keep this manual safely and in the event that the product is passed on, hand over all documents to the third party.

Intended Use

The rechargeable battery is compatible with all devices from the PARKSIDE X 20 V TEAM series. The batteries may only be charged using chargers from the PARKSIDE X 20 V TEAM series. Any other use can damage the device and thus pose a substantial risk to the user.

This device is not suitable for commercial use. The warranty is void in the case of commercial use.
The manufacturer is not liable for damage caused by improper use or incorrect operation.

General Description

The illustrations can be found on the front fold-out page.

Extent of the delivery

Rechargeable battery
Instruction manual

The charger is not included in delivery.

Dispose of the packaging material correctly.

Overview

Release button
Button for the charge status display
Battery charge level indicator
Rechargeable battery

Technical Data

Battery (Li-Ion) .PAP 20 B1
Battery cells: 5
Nominal voltage: 20 V
Capacity: 2.0 Ah
Energy: 40 Wh
Temperature: max. 50 °C
Charging process: 4 – 40 °C
Operation: -20 – 50 °C
Storage: 0 – 45 °C

This type of battery may be charged with the following chargers:

PLG 20 A1, PLG 20 A3,
PLG 20 A4, PDSLG 20 A1.

These chargers can only recharge the following batteries:

PAP 20 A1, PAP 20 B1, PAP 20 A2, PAP 20 B3,PAP 20 A3.

Charging time (min.)

| PAP 20 B1
---|---

PLG 20 A1
PLG 20 A4

| 60
PLG 20 A3
PDSLG 20 A1|

30

An up-to-date list of battery compatibility can be found at: www.lidl.de/akku

Safety information

Graphical symbols

Symbols in the manual

Warning symbols with information on damage and injury prevention.

Hazard symbol with information on the prevention of personal injury caused by electric shock.

Warning Icon Help symbols with information on improving tool handling.

Symbols on the Battery

This rechargeable battery is part of the Parkside X 20 V TEAM series.

Read through the instruction manual carefully.

Button for the charge status display

Do not dispose of batteries in household waste, fire or water.

Do not subject the battery to strong sunlight over long periods and do not leave it on a heater (max. 50 °C).

Take batteries to an old battery collection point where they will be recycled in an environmentally friendly manner.

Electrical appliances must not be disposed of with the domestic waste.

General Safety Directions

Caution! When using power tools, observe the following basic safety measures for the prevention of electric shocks and the risk of injury and fire. Please read all these instructions before using this electric tool and please keep the safety instructions. Careful handling and use of battery devices

Only recharge batteries using chargers belonging to the PARKSIDE X 20 V TEAM series.
If a charger that has been designed for a particular type of battery is used to charge other batteries, there is a risk of fire.
In the power tools, use only the batteries designed for the purpose. The use of other batteries may result in injuries and risk of fire.
Keep the unused battery away from paper clips, coins, keys, nails, screws and other small metal objects, which could cause bridging of the contacts. A short circuit between the battery contacts may cause burns or fire.
If used incorrectly, liquid may leak from the battery. Avoid contact with this. In the event of accidental contact, rinse off with water. If the liquid gets into eyes, seek medical assistance. Leaking battery fluid may cause skin irritations or burns.
Do not use damaged or altered batteries. Damaged or altered batteries can be unpredictable and lead to fire, explosion or risk of injury.
• Do not expose batteries to fire or elevated temperatures. Fire or temperatures over 130 C° can cause an explosion.
• Follow all instructions for charging and never charge the battery or the battery powered tool outside the temperature range stated in the operating instructions. Incorrect charging or charging outside the permitted temperature range may destroy the battery and increase the risk of fire.

Service

Never repair damaged batteries. All battery repairs should be carried out by the manufacturer or authorised customer service centers only.

Special safety directions for battery operated tools

Ensure that the device is switched off before inserting the battery. Inserting a battery into a power tool that is switched on may result in accidents.
Recharge the batteries indoors only because the battery charger is designed for indoor use only.
To reduce the electric shock hazard, unplug the battery charger from the mains before cleaning the charger.
Do not subject the battery to strong sunlight over long periods and do not leave it on a heater. Heat damages the battery and there is a risk of explosion.
Allow a hot battery to cool before charging.
Do not open up the battery and avoid mechanical damage to the battery. Risk of short circuit and fumes may be emitted that irritate the respiratory tract. Ensure fresh air and seek medical assistance.
Do not use any accessories that are not recommended by PARKSIDE. This can result in electric shock or fire.

Observe the safety information and notes on charging in the instruction manual for your Parkside X 20 V Team series tool and charger.

Operation

Removing/inserting the Battery

Only insert the rechargeable battery once the battery operated tool is ready for use.
Risk of injury!

To remove the battery (4) from the appliance, press the release button (1) on the battery and pull out the battery.
To insert the battery (4), place it on the guide track and push it into the appliance. It will audibly snap in.

Checking the charge status of the rechargeable battery

The battery charge status indicator (3) signalizes the state of charge of the battery (4). Press the button (2) on the battery. The state of charge of the battery is displayed by illuminating the 3-colour LED lights of the state of charge display.

3 LEDs light up (red, orange and green):
Battery is fully charged.
2 LEDs light up (red and orange):
Battery has a residual charge.
1 LED lights up (red):
Battery has to be charged

Warning Icon Only charge the battery (4) when the red LED on the charge status indicator (3) is on.

Used batteries

If a fully recharged battery lasts for considerably shorter operating times, the battery is used up and needs to be replaced. Only use an OEM battery pack replacement available from our Customer Service.
Always take heed of the applicable safety instructions as well as the environmental protection regulations and information (see “Cleaning and Maintenance”).

Storage

Remove the battery before storing the unit for longer periods of time (e.g. hibernation).
Store the battery only in a partially charged state. During prolonged storage, 2 to 3 LEDs should be illuminated.
During a longer storage period, check the state of charge of the battery and recharge if necessary roughly every 3 months.
In order to keep the battery well charged, avoid exposing the appliance to extreme heat or cold in storage.
The storage temperature for the battery is between 0 °C and 45 °C. Avoid extreme cold or heat during storage to ensure the battery output is not adversely affected.

Cleaning

Clean the battery with a dry cloth or with a paint brush. Do not use water or metal objects.

Maintenance

The equipment is maintenance free.

Waste Disposal/ Environmental Protection

Remove the battery from the device and recycle the battery and packaging in an environmentally-friendly manner. Dispose of the packaging material properly.

Electric units do not belong with domestic waste.

Do not dispose of batteries in household waste, fire (risk of explosion) or water. Damaged batteries may damage the environment and your health if toxic fumes or liquids leak out.

Defective or used batteries must be recycled in accordance with Directive 2006/66/EC.
Return the unit and the recharger to a recycling center. The plastic and metal parts employed can be separated out and thus recycled use can be implemented. Ask our Service Center for details.
Dispose of batteries in discharged condition. We recommend covering the pole with adhesive tape to prevent a short circuit. Do not open up the battery.
Dispose of batteries in accordance with the local regulations. Take batteries to an old battery collection point where they will be recycled in an environmentally friendly manner. For information about this, ask your local waste management company or our service center.
Defective units returned to us will be disposed of for free.
Throw the cut grass on the compost. Do not throw it in the normal household waste.

Guarantee

Dear Customer,
This device comes with a three year warranty from the date of purchase.
In case of defects, you have statutory rights against the seller of the product. These statutory rights are not restricted by our guarantee presented below.

Terms of Guarantee
The term of the guarantee begins on the date of purchase. Please retain the original receipt. This document is required as proof of purchase.
If a material or manufacturing defect occurs within three years of the date of purchase of this product, we will repair or replace – at our choice – the product for you free of charge. This guarantee requires the defective equipment and proof of purchase to be presented within the three-year period with a brief written description of what constitutes the defect and when it occurred.
If the defect is covered by our guarantee, you will receive either the repaired product or a new product. No new guarantee period begins on repair or replacement of the product.

Guarantee Period and Statutory Claims for Defects
The guarantee period is not extended by the guarantee service. This also applies for replaced or repaired parts. Any damages and defects already present at the time of purchase must be reported immediately after unpacking. Repairs arising after expiry of the guarantee period are chargeable.

Guarantee Cover
The equipment has been carefully produced in accordance with strict quality guidelines and conscientiously checked prior to delivery.

The warranty is only valid for material or manufacturing defects. This warranty does not extend to consumable parts exposed to normal wear and tear (e.g. battery capacity). This guarantee shall be invalid if the product has been damaged, used incorrectly or not maintained. Neither does it extend to damage resulting from water, frost, lightning and fire or improper transport. Precise adherence to all of the instructions specified in the operating manual is required for proper use of the product. Intended uses and actions against which the operating manual advises or warns must be categorically avoided.
The product is designed only for private and not commercial use. The guarantee will be invalidated in case of misuse or improper handling, use of force, or interventions not undertaken by our authorised service branch.

Processing in Case of Guarantee
To ensure efficient handling of your query, please follow the directions below:

Please have the receipt and item number (IAN 351755_2007) ready as proof of purchase for all enquiries.
Please find the item number on the rating plate.
Should functional errors or other defects occur, please initially contact the service department specified below by telephone or by e-mail. You will then receive further information on the processing of your complaint.
After consultation with our customer service, a product recorded as defective can be sent postage paid to the service address communicated to you, with the proof of purchase (receipt) and specification of what constitutes the defect and when it occurred. In order to avoid acceptance problems and additional costs, please be sure to use only the address communicated to you. Ensure that the consignment is not sent carriage forward or by bulky goods, express or other special freight.
Please send the equipment inc. all accessories supplied at the time of purchase and ensure adequate, safe transport packaging.

Repair Service

For a charge, repairs not covered by the guarantee can be carried out by our service branch, which will be happy to issue a cost estimate for you. We can handle only equipment that has been sent with adequate packaging and postage.
Attention: Please send your equipment to our service branch in clean condition and with an indication of the defect.
Equipment sent carriage forward or by bulky goods, express or other special freight will not be accepted.
We will dispose of your defective devices free of charge when you send them to us.

Service-Center

GB Service Great Britain
Tel.: 0800 404 7657
E-Mail: grizzly@lidl.co.uk
IAN 351755_2007

IE
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: grizzly@lidl.ie
IAN 351755_2007

Importer

Please note that the following address is not a service address. Please initially contact the service center specified above.

Grizzly Tools GmbH & Co. KG

Stockstädter Straße 20
DE-63762 Großostheim GERMANY
www.grizzlytools-service.eu

Spare Parts/Accessories

Spare parts and accessories can be obtained atwww.grizzlytools- service.eu

If you have issues ordering, please use the contact form.
If you have any other questions, contact the ”Service-Center”.

Battery
PAP 20 B1, 2.0 Ah: 80001156
PAP 20 B3, 4.0 Ah: 80001157
Charger
PLG 20 A1; 2,4 A;EU: 80001337
PLG 20 A1; 2,4 A;UK: 80001338
PLG 20 A3; 4,5 A; EU : 80001323
PLG 20 A3; 4,5 A; UK: 80001324
PDSLG 20 A1; EU: 80001339
PDSLG 20 A1; UK: 80001340

Translation of the original EC declaration of conformity

We hereby confirm that the battery d esign series PAP 20 B1 Serial number 000001 – 270000 conforms with the following applicable relevant version of the EU guidelines:

*2014/30/EU 2011/65/EU (EU) 2015/863**

In order to guarantee consistency, the following harmonized standards as well as national standards and stipulations have been applied:

EN 55014-1:2017 EN 55014-2:2015
EN 62841-1:2015 Appendix K
IEC 62133-2:2017 EN IEC 63000:2018

This declaration of conformity is issued under the sole responsibility of the manufacturer:

Grizzly Tools GmbH & Co. KG Stockstädter Straße 20 63762 Großostheim Germany 01.12.2020

Christian Frank
Documentation Representative

The object of the declaration described above satisfies the provisions of Directive 2011/65/EU of the European Parliament and the Council of 8 June 2011 on limiting the use of certain harmful substances in electrical and electronic appliances.

www.fsc.org

GRIZZLY TOOLS GMBH & CO. KG
Stockstädter Straße 20
DE-63762 Großostheim
GERMANY