eufy Indoor Cam 2K Pan & Tilt User Guide
- June 7, 2024
- Eufy
Table of Contents
eufy Indoor Cam 2K Pan &
WHAT’S INCLUDED
- eufy Indoor Cam 2K Pan & Tilt × 1
- Model: T8410
- Mounting Plate × 1
- USB Cable × 1
- USB Adapter × 1
- Mounting Screw Pack × 1
- User Manual × 1
PRODUCT OVERVIEW
SETTING UP THE SYSTEM
- Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices).
- Sign up a eufy Security account. Go to the app homepage. Tap Add Device, and add the IndoorCam Pan 2K to your system.
- Follow the on-screen instructions to complete the setup.
LED Status
LED Status Description
Breathing blue| Ready for setup
Solid blue| Powered on and working properly
Blinking red| Disconnected from the internet
Blinking red once| Motion or sound detected
Solid red
| Working properly with someone viewing the live stream or recording event
Solid bluish violet| System is initializing
Flashing blue and red alternately| Firmware upgrade in progress
MOUNTING THE INDOOR CAM
Select a Location for Mounting
The camera can be placed on a table, shelf, or can be mounted on a wall or ceiling. Select a location and height where you can get the desired view, and can reach a power outlet easily.
- Disconnect the Indoor Cam from the power outlet before mounting.
- Keep the eufy Indoor Cam at least 0.7 ft / 20 cm away from walls or anything that may obstruct the view. Do this to avoid infrared reflection which can have a negative impact on the night vision performance.
Mount the Indoor Camera
To mount the eufy Indoor Cam on the ceiling, follow the steps below:
- Place the positioning card against the ceiling and then mark the points at which drilling will be required.
- Drill holes with a 5/16” (8 mm) drill bit.
- Align the holes on the mounting plate with those in the ceiling. Insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco. Fix the screws with Phillipshead screwdriver to fasten the mounting plate to the ceiling.
- Align the grooves with the mounting plate and rotate the eufy Indoor Cam clockwise until it clicks into place.
- To mount the eufy Indoor Cam on a wall, we recommend using the mounting bracket (not provided) as the illustration below
POWERING ON THE INDOOR CAM
Connect the eufy Indoor Cam to a power outlet using the provided USB cable and
USB adapter. After being powered on, the eufy Indoor Cam will be connected to
the system. When it is successfully connected, the status LED will turn solid
blue.
Rotate the eufy Indoor Cam to adjust the view and check it using the live
stream which you can access in the eufy Security app. You are now all set to
use your eufy Indoor Cam.
Tip: For troubleshooting, check Help on the eufy Security app. Refer to the app page for LED indicator status.
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: (1)
Reorient or relocate the receiving antenna. (2) Increase the separation
between the equipment and receiver. (3) Connect the equipment into an outlet
on a circuit
different from that to which the receiver is connected. (4) Consult the dealer
or an experienced radio/ TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure condition. The min separation
distance is 20cm.
Notice : Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations. The following importer is the
responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone: 1-800-988-7973
This product complies with the radio interference requirements of the European
Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU.For the declaration of conformity, visit the Web
site:https://www.eufylife.com/
This product can be used across EU member states. Due to the used enclosure
material, the product shall only be connected to a USB Interface of version
2.0 or higher. The adapter shall be installed near the equipment and shall be
easily accessible.
Do not use the Device in the environment at too high or too low temperature,
never expose the Device under strong sunshine or too wet environment. The
suitable temperature for T8410 and accessories is 0°C-40°C.
When charging, please place the device in an environment that has a normal
room temperature and good ventilation. It is recommended to charge the device
in an environment with a temperature that ranges from 5°C~25°C
Please ensure to use only the charger offered by the manufacturer. Using
unauthorized charger may cause danger and violate the authorization of the
device and the guarantee article.
This charger is for indoor use only. The charger type is TEKA012-0502000EU ,
output voltage/current is 5Vdc/2A. The plug considered as disconnect device of
adapter. RF exposure information: The Maximum Permissible Exposure (MPE) level
has been calculated based on a distance of d=20 cm between the device and the
human body. To maintain compliance with RF exposure requirement, use product
that maintain a 20cm distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Wi-Fi Operating Frequency Range:2412~2472MHz ; Wi-Fi Max Output Power:19dBm
Bluetooth Operating Frequency Range:2402~2480MHz; Bluetooth Max Output
Power:8dBm(EIRP)
The following importer is the responsible party (contact for EU matters only)
Importer: Anker Technology (UK) Ltd
Importer Address : Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham, B11 2AA, United Kingdom
This product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health
and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where
you bought this product.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.”
This Class B digital apparatus complies with Canadian ICES-003.
NMB-003 du Canada.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
CUSTOMER SERVICE
Warranty: 12-month Limited Warranty
Call Us: United States +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT)
United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
Germany +49 (0) 69 9579 7960 Mon-Fri 6:00-11:00
Email Us:
Customer Support: support@eufylife.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>