riverbed VEP1485 SteelConnect EX Certified Appliance User Guide
- June 3, 2024
- riverbed
Table of Contents
VEP1485 SteelConnect EX Certified Appliance
User Guide
VEP1485 SteelConnect EX Certified Appliance
SteelConnect EX Certified Appliance Quick Overview Guide for V210-Dell VEP1425, V220-Dell VEP1445, and V240-Dell VEP1485
Platform Specifications
| Model | Vendor Model | Description |
|---|---|---|
| V210 | Dell VEP1425 (V210) | Dell EMC Networking Versa/SteelConnect EX ready |
VEP1425, 4 core, 8GB RAM, 16GeMMC, 120GSSD, Integrated WIFI
V210N| Dell VEP1425N (V210)| Dell EMC Networking VEP1425N, Versa/SteelConnect
EX
ready, 4 core, 8GB RAM, 16G eMMC, 120GSSD, No WIFI
V220| Dell VEP1445 (V220)| Dell EMC Networking, Versa ready VEP1445, 8 core,
16GB RAM, 240GB SSD, Integrated WIFI
V220N| Dell VEP1445N (V220)| Dell EMC Networking, Versa ready VEP1445, 8 core,
16GB RAM, 240GB SSD, No WIFI
V240| Dell VEP1485 (V240)| Dell EMC Networking VEP1485N, Versa ready, 16 core,
32GB RAM, 16G eMMC, 240GB SSD, Integrated WIFI
V240| Dell VEP1485N (V240)| Dell EMC Networking VEP1485N, Versa ready, 16
core, 32GB RAM, 16G eMMC, 240GB SSD, No WIFI
Performance| V210: up to 750 Mbps,
V220: up to 2 Gbps,
V240: up to 3 Gbps
---|---
Processor, Memory and Storage| V210: Intel Denverton/4Core, 8G DDR4, 128G SSD
- 16G eMMC V220: Intel Denverton/8Core, 16G DDR4, 256G SSD + 16G eMMC
V240: Intel Denverton/16 Core, 32G DDR4, 256G SSD + 16G eMMC
Encryption Assist in Hardware| Inbuilt Intel® QuickAssist Technology (QAT)
Built-in Interfaces| 2x 10GE SFP+, 6x Cu 1GbE
Other Interfaces| Management: 1x GbE; Console: 1x micro USB; 2x USB 3.0 ports
TPM| Yes
PSU| External Power Adapter (100-240V)
LCD Panel| No
Cooling Fans| V210: 1 Fan, V220/240: 2 Fans
Enclosure| Height: 2.0”(5.2 cm) X Width: 8.1 inches (20.8 cm) X Depth: 7.9 inches (20.0 cm)
MTBF| Dell to provide
Certification| Dell to provide
(*) Routing, Forwarding, Layer 7 application aware traffic steering, Nextgen Firewall, URL Filtering. Testing done with UDP traffic (RFC 2544 test with 0.1% acceptable loss ratio), 1024 sessions with application offload, vxlanentropy, and isolcpu options enabled. Encryption used for testing is AES128-GCM. Performance includes aggregate of ingress and egress traffic. Image used for testing: 16.1R2S10.
Module Options for Inbuilt Fiber Ports (vni-0/0 and vni-0/1)
10G SFP+
| Riverbed P/N | Vendor P/N | Description |
|---|---|---|
| TRC-1-SFPP-SR | Finisar FTLX8574D3BCV | Finisar 10GBASE-SR/SW 400m Multimode |
Datacom SFP+ Optical Transceiver
TRC-1-SFPP-LR| Finisar FTLX1471D3BCV| Finisar 10GBASE-LR/LW 10km 1310nm Single
Mode Datacom SFP+ Optical Transceiver
1G SFP
| Riverbed P/N | Vendor P/N | Description |
|---|---|---|
| TRC-1-SFP-SX | Finisar FTLF8519P3BNL | 1000BASE-SX Ethernet 500m SFP Optical |
Transceiver
TRC-1-SFP-LX| Source Photonics SP-GB-LX- CDFN| 1000BASE-LX Ethernet 10km SFP
Optical Transceiver
Notes:
-
Port 0 and 1: 1G Copper SFPs are not supported. If inserted, the kernel will not recognize these interfaces and may result in SteelConnect EX services not coming up or classified as unknown interfaces.
[ 26.029123] ixgbe 0000:05:00.0: failed to load because an unsupported SFP+ or QSFP module type was detected. [ 26.039091] ixgbe 0000:05:00.0: Reload the driver after installing a supported module.
[ 26.092678] ixgbe 0000:05:00.1: failed to load because an unsupported SFP+ or QSFP module type was detected. [ 26.102646] ixgbe 0000:05:00.1: Reload the driver after installing a supported module. -
We recommend you insert the SFP/SFP+ before starting versa services.
a. In case of speed change in SFPs, we recommend you enable/disable the vni interface.
b. If there is a change in the remote end configuration, we recommend you enable/disable the vni interface on the SteelConnect EX side. -
For 1G SFPs, turn off the auto negotiation at the remote end.
• If the far-end is Cisco, configure speed to 1000 in the interface configuration. interface Ethernet 1/25 speed 1000
• If the far-end is Juniper, configure no-auto negotiation in the interface configuration.
enable; ether-options { no-auto-negotiation; link-mode full-duplex; speed { 1g; } }
Riverbed and any Riverbed product or service name or logos used herein are trademarks of Riverbed Technology. All other trademarks used herein belong to their respective owners. The trademarks and logos displayed herein may not be used without the prior written consent of Riverbed Technology or their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>