UEME JK-01 Retro Tabletop Jukebox with CD Player User Guide

: June 6, 2024
: UEME

Table of Contents

Important Safety Instructions
Contents & Features
Basic Operation
FM Radio Operation
AUX Operation
Speciﬁacation
FCC Statement
IC Statement
Disposal Information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JK-01 Retro Tabletop Jukebox with CD Player
User Guide UEME JK 01 Retro Tabletop Jukebox with CD
Player

Important Safety Instructions

Warning : To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualiﬁed service personnel.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The lightning ﬂash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to persons.

This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user-accessible parts.

Read these instructions.
Keep instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades one wider than the other. A grounding plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
Only use attachments/accessories speciﬁed by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug the apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualiﬁed personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Contents & Features

Contents
1 x Jukebox JK-01
1 x Mains Adaptor 9V/1.3A

Features

Bluetooth 5.0
FM Band (87.5Mhz-108Mhz)
50 Presets FM Radio Stations
Auto Scan & Store
FM Manually Search
Aux-in
Telescopic Antenna
Digital Display
Color Changing Light
2 x Built-in Stereo Speakers
2 x 8W Power Output

Layout

UEME JK 01 Retro Tabletop Jukebox with CD Player - figure
1

STANDBY Button
Press to turn the unit ON. / Press and hold to turn the unit OFF.
/SCAN Button
In Bluetooth mode, Quick press to play or pause playback, press and hold to disconnect the Bluetooth connection.
In FM mode, quick press to switch between FM preset stations mode
(‘CH’ will ﬂash on the digital display) and FM manually search mode
( ‘FREQ’ will ﬂash on the digital display), press and hold to scan the station.
PREV/TUN- Button
In FM preset stations mode, press to select the preset station.
In FM manually search mode, press to manually search a station.
Press and hold to auto-search a station.
AUX-IN Port
Connect an external source to the AUX-IN port.
NEXT/TUN+ Button
In FM preset stations mode, press to select the preset station.
In FM manually search mode, press to manually search a station.
Press and hold to auto-search a station.
STANDBY Indicator
When the unit is in standby mode, the indicator will be solid red.
BT Indicator
When pairing, the indicator ﬂashes blue, when connected, the indicator will be solid blue.
EQ Button
Quick press the EQ button to cycle through the equalizer presets.
VOL+ Button
Press to increase volume.
VOL- Button
Press to decrease volume.
MODE Button
Press to select a function mode: FM mode, Bluetooth mode, or AUX-In mode
(AUX IN is only available when the aux cable is plugged in)
Digital Display

Basic Operation

Connecting Power
The JK-01 uses a 9V 1.3A mains power lead (supplied). Plug the mains lead into a suitable mains socket and connect the lead to the mains input on the back of the jukebox.

Turning On/Off
Press the button to turn the unit ON.
Press and hold the button to turn the unit OFF.

Modes
The JK-01 has 3 function modes available: Radio, Bluetooth, and AUX IN. You can select the desired function by pressing the “MODE” button to cycle through the 3 different functions available.
Please Note: The AUX IN is only available when you plug in an AUX cable (not supplied).

Case Lights
To turn the lights On/Off simply press and hold the “MODE” button.

EQ Presets
Quick press the EQ button to cycle through the equalizer presets Jazz, Vocal, Flat, Classic, Pop, Rock.

UEME JK 01 Retro Tabletop Jukebox with CD Player - figure
2

Volume Control
The unit’s volume is set in a small adjusting stepped range in 0-32. Quickly press the VOL+ or VOL- buttons to adjust the volume by one level, press and hold to adjust volume continuously.

FM Radio Operation

Repeatedly press the MODE button to cycle through the functions until a radio frequency and FM are shown on the display.
Please ensure you have the telescopic antenna extended fully to receive the best signal available.

/SCAN Button
Quick press to cycle through the FM preset stations mode (‘CH’ will ﬂash on the digital display) and the FM manually search mode (‘FREQ’ will ﬂash on the digital display) Press and hold this button to auto scan and store up to 50 stations that may be available in your area. Once the scan and store have ﬁnished it will automatically put you onto the ﬁrst stored station. If you wish to end the scan and store it before it has ﬁnished, simply press the button again.

PREV/TUN- Button
In FM preset stations mode, quick press to skip back through the available stations.
In FM manually search mode, press to manually tune to a desired station, press and hold to auto scan for a station.

NEXT/TUN+ Button
In FM preset stations mode, quick press to skip forward through the available stations.
In FM manually search mode, press to manually tune to a desired station, press and hold to auto scan for a station.

Adjusting for Best Reception
FM broadcast: Extend and reposition the FM antenna located on the back of the unit.
In BT (Bluetooth) mode, this unit can play audio from external devices that have a built-in Bluetooth function.

Connecting via Bluetooth

Repeatedly press the MODE button to cycle through the functions until ‘bt’ is displayed.
The jukebox will then be in pairing mode indicated by the blue ﬂashing indicator.
Turn ON the Bluetooth function on your external device.
NOTE: The effective distance between your external device and this apparatus is 33 feet (10 m).
Wait a moment until ‘UEME AUDIO’ appears on the paired devices list, then select ‘UEME AUDIO’ to pair your device with the jukebox.
When you have successfully paired, the ﬂashing indicator will turn solid.

Playing Music via Bluetooth

Once your device is connected, open the music player application or program on your external device. If your device is not connected yet, see ‘Connecting via Bluetooth’.
You can now control music playback with the /SCAN, PREV/TUN-, NEXT/TUN+, VOL- and VOL+ buttons on the Jukebox.

PLEASE NOTE: Some buttons may not work in certain music player applications or programs.

AUX Operation

In AUX (auxiliary) mode, this unit can play audio from an external audio device (iPhone, MP3 Player, Portable CD Player, etc).

Connecting via auxiliary

Plug one end of the AUX IN cable (not included) into the AUX IN jack located on the front of the unit.
Repeatedly press the MODE button to cycle through the functions until ‘AUX’ is shown on the display.
Plug the other end of the cable into the headphone jack of your external audio device.

NOTE:
The AUX IN mode is only available when the AUX cable (not supplied) is plugged in.
Playback functions and operations are only available on your external device.

Speciﬁacation

Jukebox with Bluetooth, FM radio, and AUX-IN features.

General
Weight: 2.8kg (approx.)
Dimensions (W x H x D): 375mm x 270mm x 190mm (approx.)
Mains Adaptor: 9V 1.3A

Bluetooth
Version: 5.0
Frequency Range: 2.4Ghz
Range: 10m
Bluetooth Name: UEME AUDIO

Speaker
Channels: Stereo
2 x Speakers
Speaker Watts: 2 x 8W

Radio
FM Frequency Range: 87.5Mhz-108Mhz
Aerial Type: Telescopic
Frequency power: 20mW

We reserve the right to make technical modiﬁcations and correct errors.

| Symptom| Possible Cause| Solution
---|---|---|---
GENERAL| •Unit will not power on| •Unit is unplugged.
•Unit isn’t turned ON.| •Connect the unit to the AC power supply.
•Press the o button to turn the unit ON
•No sound output from speakers| •The volume level is set too low.
•The input selector does not match the playback source.| •Adjust the volume.
•Select the correct input source.
•Noise/Distortion in sound output| •The unit is too close to a TV set
or another interfering device.| •Turn off the TV or other appliance, and relocate the unit.
•Unit fails to respond| •It might be caused by external factors such as ESD (Electrostatic discharge).| •Disconnect the power cord and external audio device. Re-plug the power cord after 1 minute.
FM RADIO| •Cannot listen to any station, or signal appears weak
•The sound is distorted| •The station is not tuned in properly.
•A N set is being used nearby and is interfering with the radio reception.
•The antenna is not oriented properly.| •Properly tune in to the desired station.
• Turn off the interfering TV set.
•Re-orient the antenna until reception improves.
AUX| •No sound output with the external audio device plugged into the front AUX-In socket| •AUX-In jack is unplugged.
•Unit is not in proper Mode.| •Make sure the Auxiliary Cable is plugged into both sources.
•Select proper AUX mode.
BLUETOOTH| •No sound| •The unit is not switched to Bluetooth mode.
•Your device’s and/or the unit’s volume is not turned up.
•Your device is too far from the unit or there’s some obstacle between your device and the unit.| •Ensure the unit is switched to Bluetooth mode.
•Move your Bluetooth device closer to the unit.
•Turn OFF your Bluetooth device and unit. Then turn ON.
•Increase the volume on your portable device and/or the unit.
•Sound has a lot of static| •Your device is too far away.| •Bring your device closer to the Jukebox.
•Unable to pair with a Bluetooth device| •Your device doesn’t have
Bluetooth connectivity.
•The Bluetooth pairing is not successful.| •Confirm that your device is Bluetooth compatible.
•Re-pair the unit and device again.

FCC Statement

Federal Communications Commission (FCC) Compliance statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

IC Statement

Industry Canada (IC) Compliance Statement

This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:

This device may not cause interference

Declaration Of Conformity
Hereby, UEME Ltd declares that this product is in compliance with:
Directive 2014/53/EU.

Disposal Information

Never throw batteries into are or expose them to excessive heat sources.
If batteries are swallowed, please seek immediate medical attention.
Always ensure correct +/- battery polarity when installing batteries.
Do not recharge non-rechargeable batteries.
Equipment, which is marked with the WEEE logo (as shown on the left), should not be thrown away with your household waste. Contact your local authority waste disposal department, as they will be able to provide details of the recycling options available in your area.

Electrical and electronic equipment (WEEE) contains materials, parts, and substances, which can be dangerous to the environment and harmful to human health if the waste of electrical and electronic equipment (WEEE) is not disposed of correctly.

Equipment, which is marked with the WEEE logo (as shown on the left), should not be thrown away with your household waste. Contact your local authority waste disposal department, as they will be able to provide details of the recycling options available in your area.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modiﬁcations to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

service@ueme.online