JOWAVE BH830 Bluetooth Headset User Manual

Bluetooth headset

BH830 User Manual

WELCOME

Thank you for choosing JOWAVE BH830 Stereo Single Bluetooth Headset.
Please read below instructions carefully before use. It will help you set up and operate this product properly and enjoy the advanced features.

 PACKING LIST

 DETAILED DESCRIPTION

RESET THE HEADSET
In the power-on state, press and hold the “-” button and the power button at the same time for 5 seconds, the red and blue lights will flash 2 times. Reset finished.

 HOW TO TURN ON THE HEADSET

1. Take out the headset from the box,press the MFB button for 2 seconds, it will turn on and with a voice prompt” power on”;
2. And the light will flash in blue;
3. ontinue to press the MFB button for 5 seconds it will enter to pairing status, and the voice prompt’Pairing”
4. When enter to pairing status, the light will flash red and blue alternately (Press the MFB button for 5 seconds to off the headset).  (It will automatically shut down in 5 minutes when there is no connection in the power-on state.)

 HOW TO CONNECT WITH YOUR BLUETOOTH DEVICE

1. Turn on the headset and enter to the pairing function;
2. Activate your device’s bluetooth function,setting-bluetooth-activate;
3. Search the bluetooth item and the found our headset “BH830”, click the “BH830″ to connect, there will a voice prompt”Connected”.

 INCOMING CALL

Answer/end the call
Press the MFB button once
Reject the call
Press the MFB button twice

REDIAL THE LAST CALL

Press the MFB button twice under the standby mode to redial the last call

 MUSIC

Play/Pause
Into your music,and then you can press the MFB button to play/pause the music.

Previous/Next Song
Previous: Long press the “-“button for 1.5 seconds
Next Song: Long press the “+” button for 1.5 seconds

Siri
Long press the MFB button for 2 seconds to activate siri voice assistant

VOLUME+/-
Volume +: Press the “+” button
Volume -: Press the “-” button

HOW TO CHARGING THE HEADSET

TROUBLESHOOTING

1. The headset cannot be connected to the bluetooth device
   How to fix it:

2. Confirm the status of the Bluetooth function;

3. Turn off bluetooth function of your device, delete the historical connection and pairing again;

4. Or please try to connect other accessories device.

5. The headset can not be charged
   How to fix it:
   Replace a new charging cable.

6. The headset does not respond
   How to fix it:
   Turn off the headset and turn on it again, then try to connect with your bluetooth device.

7. The headset have no sound
   How to fix it:

8. Check whether the audio track is played via the smartphone application.

9. Check the headset battery whether was run out of.

10. Increase the volume of headset and mobile devices (or music playback applications).

11. Make sure that the correct mobile device is connected.

12. Please try to connect to other mobile devices.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received,including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE :
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
3. Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Warning

1. Do not place device in very low or high temperature environment, in extreme temperature environment, headset may transform, battery capacity may decrease, headset lifetime may be shortened.
2. Do not use headset in storm, The headset may be broken and will increase the risk of lightning stroke.
3. Do not disassemble or refit the headset for any reason, it make broken of the headset. Please send it to sales agency to repair.
4. Repeated charging and discharging will make the battery performance reduced after some time, this is normal for all rechargeable batteries.
5. Pls put the items and accessories to the places which can not be touched by kids or pets to avoid any unexpected accidents.

No matter the product is lost, outdated, broken or you just don’t like this product, please contact our customer service, we will do our best to give you a satisfactory answer.

PRODUCT FEATURE

C &E Connection E-Commerce (DE) GmbH
Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
Email: info@ce-connection.de

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>