JOWAVE G3 Bluetooth Headset User Manual

May 15, 2024
JOWAVE

(G3)
BUSINESS HEADSET

JOWAVE G3 Bluetooth Headset

User Manual

WELCOME

Thank you for choosing the “G3” Wireless Headset. Please read the below instructions carefully before using. t will help you set up and operate this product properly and enjoy the advanced features.
No matter any questions, such as item broken or missing accessories when you received the package, please contact our customer service team, we will do our best to give you a sat sfactory answer.
  24 Hours customer service team: support@playoung.cn
**** Website: www.playoung.cn

www.playoung.cn

PACKAGE LIST

JOWAVE G3 Bluetooth Headset - Package List

PRODUCT OVERVIEW

HOW TO WEAR THE HEADSET

  1. Adjust the angle of the earhook and the microphone boom, and then hang the earhook on your auricle.
  2. After you adjust the ear hook, you can hold on to the earplug to adjust the ear tips angle to find a suitable position then you can wear the headset n your ear cannel comfortably.

JOWAVE G3 Bluetooth Headset - Fig 1

  1. MFB (Multi Function Button)
  2. LED Indicator
  3. Volume+
  4. Volume-
  5. Microphone
  6. TYPE-C Charging port
  7. Charging Pin
  8. Battery Power Display
  9. Charging Pin
  10. TYPE-C Charging port

PAIRING AND CONNECTION

Step1

  1. Open the charging case and take out the earbud Earbud, it will power on auto and the light will flash (Blue and Req) with a voice prompt “Power on”, will enter pairing mode, and with a voice prompt “Pairing”
  2. In off status, press the “MFB” button 3s to power on and auto enters into pairing mode with the Indicator light flashing blue 10 times and then flashing red-blue alternately.

Step2

  1. Turn on the Bluetooth function on your phone via ‘Setting’>’Bluetooth On’;
  2. Tap on “G3” on the retrieved device to connect;
  3. After connecting is completed, the earbud will respond with a voice prompt”Connected”.
  4. You can use the Bluetooth headset to listen to music or on a Call.

The next time you use this earbud, just need to take out the Bluetooth earbud from the charging case and turn on the Bluetooth function of the smart device to automatically connect.

Wireless Headset Connection

JOWAVE G3 Bluetooth Headset - Fig 2

BASIC OPERATION

Function Operation LED Beep
Power on In off status, touch and hold “MFB” button for 2s to power on.
Indicator light flashes blue 3 times. Power on
Power off In off status, touch and hold “MFB” button for 5s to power on.
Indicator light flashes red 3 times. Power off
Enter into pairing mode When you take it out of the charging case, it
automatically enters pairing mode. Indicator light flashes blue 10 times and

then
flashes red-blue alternately.| Pairing
Pairing completed| /| Indicator light off| Connected
Answer a call| Short touch “MFB” button(when call coming)| /| /
Hang up a call| Short dual touch ,’MFB” button (during a call)| /| /
Reject a call| Tbouuttcohnafnodr 2holds (w”hMeFn call coming)| /| /
Mute/ Unmute| Double press “—” button(during a call)| /| Mute on/ Mute off
Redial a call| Double touch “MFB” button.| /| /
Play / Pause| Short touch “MFB” button when play music.| /| /
Siri| Touch and hold “MFB” button for 1 second to activate “Siri” in
standby state.| Indicator light
flashes blue.| /
Volume up| Short press “+” button.| /| /
Previous song| Press and hold “+” button.| /| /
Volume down| Short press “—” button.| /| /
Next song| Press and hold “—” button.| /| /
When charging the headset| /| Indicator light is red solid.| /
When the headset is full charged| /| Indicator light is blue solid.| /
Initialize| While charging, touch and hold “MFB” button.| Indicator lightflashes red-blue alternately.| /

HOW TO CHARGE

  1. Charging with Type-C CableJOWAVE G3 Bluetooth Headset - Fig 3 Headset
    Charging: Red light
    Fully Charged: Blue light Charging Case
    The number on the right side of the battery display will flash.

  2. Charging with Charge Case
    (1 ). Put the headset in the charging case. (Please attach the charging pin of the headset and charging case exactly.)

(2). Closing the lid, and the two utility poles beside the number will flash. The two poles will f ash 3 times and then the lights will stay on when the headset s fully charged.

JOWAVE G3 Bluetooth Headset - Fig 6

NOTE:
When using the headset for the first time, please fully charge the battery. (Be sure to charge it with the included TYPE-C cable.)
The number displayed on the LED s the battery evel of the charging case, not the of the headset. The headset battery level can be displayed on the connected device.

TROUBLE SHOOTING

1. The headset cannot be connected to the smart device:

  1. Confirm the status of the Bluetooth function;
  2. Turn off the Bluetooth function of your device, delete the historical connection, and pair again;
  3. Please try to connect other accessories devices.

2. The headset can not be charged:

  1. Make sure that the headset s correctly placed/stored in the charging case.
  2. Confirm the battery capacity of the charging case.
  3. Check whether the charging contact point of the charging case or headset has a spot or not.

3. The headset does not respond:
Put the headset n the charging case back, close the lid, and wait another 1 minute or so, then take out the headset, and try to connect again.

4. The charging case cannot be charged:

  1. Check whether the charging cable s tightly connected to the charging case.
  2. Check the remaining battery capacity.
  3. Replace another charge cable

5. The headset has no sound:

  1. Check whether the audio track is played via the smartphone application.

  2. Check whether the headset battery was run out of.

  3. ncrease the volume of headset and mobile devices (or music playback applications).

  4. Make sure that the correct mobile device is connected.
    Please try to connect to other mobile devices.

  5. Please try to connect other accessories devices.

SAFETY INSTRUCTION

  1. Do not charge the battery for too long, be sure to disconnect the connection cable after charging. (1.5H)

  2. When the product is not used for a long period, please charge it once a month.

  3. Do not charge the product near a wet source. It may cause fire or malfunction due to electric shock or short circuit.

  4. To protect your ears, Please reduce the volume before use, and do not turn the volume up too oud.

  5. If the product s dropped into a flammable liquid such as water, please stop using it and contact the store where you purchased it or us. If it continues to be used it may ead to fire, malfunction, or electric shock.

  6. Do not touch the nterior. and opening the nterior may result n malfunction or electric shock. In addition, we do not guarantee performance if the interior has been modified.

  7. Do not charge with wet hands or touch the charging port.
    It may cause electric shock.

  8. If you feel uncomfortable while using this product, please stop using it immediately.

  9. If you are using a medical device such as a pacemaker, please consult your doctor before use.

  10. Do not allow children to use t. (Less than 3 years old)

PRODUCT PARAMETERS

Model: G3
Chips Version: V5.2
Voltage: DC4.7-5V/1A
Headset Capacity: 105mAh
Charge Case Capacity: 400mAh
Net of Headset: 16.5g
Net of Charge Case: 61g
Charge Time (Headset): 1.5H
Charge Time (Charge Case): 1.5H
Support System: OS/Android/Windows
Transmission Range: 33feet(10m)

C &E Connection E-commerce (DE) GmbH
Zurn Linnegraben 20, 65933, Frankfurt am Main,Germany

JOWAVE G3 Bluetooth Headset - Symbol 1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals