D-Link QSFP28 100GBase-SR4 Multi-Mode Transceiver Installation Guide

: June 6, 2024
: D-Link

Table of Contents

Connecting the transceiver
TERMS AND CONDITIONS FOR SAFE OPERATION
Specifications
TECHNICAL SUPPORT
OFFICES
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

D-Link QSFP28 100GBase-SR4 Multi-Mode Transceiver Installation Guide

Connecting the transceiver

Plug the DEM-Q2801Q-SR4 transceiver into the QSFP28 port of your switch.

Connect a fiber cable to the DEM-Q2801Q-SR4 transceiver in order to connect your switch to fiber media.
Connecting the transceiver

The DEM-Q2801Q-SR4 transceiver is hot pluggable. You can connect the transceiver while the system is powered on without causing any issues, and easily plug or unplug the transceiver without interrupting the network operation.

TERMS AND CONDITIONS FOR SAFE OPERATION

Read this section carefully before installing and connecting the device. Make sure that the device and cables are not mechanically damaged. The device must be used only for its intended purpose, in accordance with the quick installation guide.

The device is designed to operate in a dry, clean, dust-free and well ventilated room with normal humidity, away from powerful heat sources. Do not use it outdoors or in places with high humidity.

Do not place on the device foreign objects. The ambient temperature in the immediate vicinity of device and inside its case should be in the range from 0 to +70 °C.

The power supply must comply with the power supply parameters specified in the technical device characteristics.

Do not open the case of the device! Before cleaning the device from dirt and dust, unplug device power. Remove dust with a damp cloth. Do not use liquid/aerosol cleaners or magnetic/static cleaners. Avoid moisture entering the device.

The service life of the device is 2 years.

The warranty period is calculated from the date of purchase of the device from an authorized dealer for territory of Russia and the CIS countries and is one year. Regardless of the date of sale, the warranty period cannot exceed 2 years from the date of purchase. the production of the product, which is determined by the 6 (year) and 7 (month) digits of the serial number, indicated on the technical data label.

Year: C – 2012, D – 2013, E – 2014, F – 2015, G – 2016, H – 2017, I – 2018, J – 2019, 0 – 2020, 1 – 2021.

Month: 1 – January, 2 – February, …, 9 – September, A – October, B – November, C – December. If you find a malfunction of the device, contact the service center or group D-Link technical support.

Specifications

 **Hardware**

Interfaces × 1 port 100GBase-SR4
Form factor type × QSFP28
Connector × MPO (female)
Uni-/bi-directional × Uni-directional
Fiber optic cable support × Multimode
Standards × IEEE 802.3bm 100GBase-SR4
Communication distance × OM3 MMF: 70 m
OM4 MMF: 100 m
Data transfer rate × 100 Gbps
Wavelength × 850 nm
Output optical power (Tx) × Max: 2.4dBm
× Min: -8.4 dBm
Input optical power (Rx) × Max: 2.4dBm
× Min: -10.3 dBm
Sensitivity × -9.2 dBm
Supported functions × Hot plugging
× MSA Compliance
× RoHS compliant

Physical parameters

Dimensions (L x W x H) : 70 x 18.3 x 8.5 mm

Operating conditions

Power 3.3 V
Max. input current 760 mA
Max. power consumption 2.5 W
Temperature Operating: 0 to 70 °C
Storage: -40 to 85 °C Humidity
Operating: 0% to 85%
Storage: 0% to 85%

TECHNICAL SUPPORT

Software updates and documentation are available on the D-Link website. D-Link provides free support for customers during the warranty period. Clients can contact the D-Link technical support team by phone or online. D-Link technical support is available 24/7, except official holidays. The call is free throughout Russia.

D-Link technical support: 8-800-700-5465
Online technical support:http://www.dlink.ru e-mail: support@dlink.ru
Manufacturer: SANway Optoelectronics technology Corporation, Taiwan, Taipei, Zhonghe, Zhongzheng Road, 235 16F, No. 868-3
Authorized representative, importer: D-Link Trade LLC 390043, Ryazan, Shabulina Ave., 16 Tel.: +7 (4912) 575-305