D-Link DEM-330R 1000Base-BX-U Single-Mode WDM SFP Transceiver Installation Guide

: June 6, 2024
: D-Link

Table of Contents

Connecting the transceiver
TERMS AND CONDITIONS FOR SAFE OPERATION
Specifications
OFFICES
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

D-Link DEM-330R 1000Base-BX-U Single-Mode WDM SFP Transceiver Installation Guide

Connecting the transceiver

Plug the DEM-330R / DEM-330T transceiver into the SFP port of your switch. Connect a fiber cable to the DEM-330R / DEM-330T transceiver in order to connect your switch to fiber media.
Product Overview

The DEM-330R / DEM-330T transceiver is hot pluggable. You can connect the transceiver while the system is powered on without causing any issues, and easily plug or unplug the transceiver without interrupting the network operation.

TERMS AND CONDITIONS FOR SAFE OPERATION

Read this section carefully before installing and connecting the device. Make sure that the device and cables are not mechanically damaged. The device must be used only for its intended purpose, in accordance with the quick installation guide.

The device is designed to operate in a dry, clean, dust-free and well ventilated room with normal humidity, away from powerful heat sources. Do not use it outdoors or in places with high humidity. Do not place on the device foreign objects. The ambient temperature in the immediate vicinity of device and inside its case should be in the range from 0 to +70 °C. The power supply must comply with the power supply parameters specified in the technical device characteristics.

Do not open the case of the device! Before cleaning the device from dirt and dust, unplug device power. Remove dust with a damp cloth. Do not use liquid/aerosol cleaners or magnetic/static cleaners.

Avoid moisture entering the device. The service life of the device is 2 years. The warranty period is calculated from the date of purchase of the device from an authorized dealer for territory of Russia and the CIS countries and is one year.

Regardless of the date of sale, the warranty period cannot exceed 2 years from the date of purchase. the production of the product, which is determined by the 6 (year) and 7 (month) digits of the serial number, indicated on the technical data label.

Year: C – 2012, D – 2013, E – 2014, F – 2015, G – 2016, H – 2017, I – 2018, J – 2019, 0 – 2020, 1 – 2021. Month: 1 – January, 2 – February, …, 9 – September, A – October, B – November, C – December. If you find a malfunction of the device, contact the service center or group D-Link technical support.

The DEM-330R/10KM and DEM-330T/10KM transceivers work in pairs. The DEM- 330R/3KM and DEM-330T/3KM transceivers work in pairs. Connecting the transceiver Connect the DEM-330R / DEM-330T transceiver to the switch’s SFP port. To connect switch to a fiber optic line, connect the fiber optic cable to transceiver DEM-330R / DEM-330T.

The DEM-330R / DEM-330T transceiver is hot pluggable. Connecting the transceiver to a powered device will not cause any problems. This allows you to connect or disconnect the transceiver without interrupting the rest of the networks.

Specifications

Hardware:

Interfaces
- 1 port 1000Base-BX-U Form factor type
- SFP

Connector

```
* Simplex SC (DEM-330R/3KM)
```
- Simplex LC (DEM-330R/10KM)
Uni-/bi-directional:
- Bi-directional
Fiber optic support cable:
- Single mode
Standards:
- IEEE 802.3z 1000Base-BX-U
Transmission distance:
- 3 km (DEM-330R/3KM)
- 10 km (DEM-330R/10KM)
Transfer rate:
- 1.25 Gbps
Wavelength:
- Tx: 1310 nm, Rx: 1550 nm
Output optical power (TX):
- DEM-330R/3KM
- Max: -8 dBm
- Min: -15 dBm
DEM-330R/10KM
- Max: -3 dBm
- Min: -9 dBm
Input optical power (Rx)
- DEM-330R/3KM
- Max: -3 dBm
- Min: -20 dBm
- DEM-330R/10KM
- Max: -3 dBm
- Min: -21 dBm
Sensitivity
- -20 dBm (DEM-330R/3KM)
- -21 dBm (DEM-330R/10KM)
Cable type
- Single-mode optical 9/125 µm
Supported functions
- Hot plugging
- MSA Compliance
- RoHS compliant Physical parameters
Dimensions (L x W x H)
- 63.8 x 13.7 x 8.5 mm (DEM-330R/3KM)
- 55.4 x 13.7 x 8.5 mm (DEM-330R/10KM)
Operating conditions Power
- 3.3 V
Max. input current
- 220 mA
Temperature
- Operating: 0 to 70 °C
- Storage: -40 to 85 °C
Humidity
- Operating: 0% to 85%
- Storage: 0% to 85%

TECHNICAL SUPPORT

Software updates and documentation are available on the D-Link website.
D-Link provides free support for customers during the warranty period.
Clients can contact the D-Link technical support team by phone or online.
D-Link technical support is available 24/7, except official holidays. The call is free throughout Russia.

D-Link technical support:
8-800-700-5465
Online technical support:
http://www.dlink.ru
e-mail: support@dlink.ru

Manufacturer: D
ongguan Yizhao Electronic Co., Ltd., China, Dongguan District, Humen Highway S358, ihua industrial park Authorized representative, importer: D-Link Trade LLC
390043, Ryazan, Shabulina Ave., 16
Tel.: +7 (4912) 575-305