D-Link DPN-100 GPON ONU Transceiver SFP Module Installation Guide
- June 6, 2024
- D-Link
Table of Contents
D-Link DPN-100 GPON ONU Transceiver SFP Module
Before You Begin
This installation guide provides instructions for installing the DPN-100 on
your network. The D-Link DPN-100 is a G.984.2 (GPON) Optical Network Terminal
(ONT) with Small Form-Factor Pluggable (SFP) packaging.
Check the antistatic wrist strap into the installation section
Package Contents
This DPN-100 package includes the following items:
- DPN-100 GPON ONU Transceiver SFP Module
Hardware Overview
| Connector| Description
---|---|---
1| SC/APC port| SC/APC port for fiber services.
2| Bail lever| Lever for removing the device from the socket.
3| SFP Interface| SFP interface for SFP port.
Installation
Note: The DPN-100 is a static-sensitive device. Use an antistatic wrist strap (or equivalent) connected to a grounded surface before opening and while installing the DPN-100.
Connecting the DPN-100
- Remove the DPN-100 from its protective packaging.
- Verify that the target socket is compatible. Note the SFP socket orientation – it may require the DPN-100 to be turned upside-down for the correct insertion.
- Check the following before attempting to insert the DPN-100 into the target SFP socket.
- The DPN-100’s bail is in the closed (locked) position.
- The DPN-100’s dust cover is inserted into the SC/APC fiber opening.
- Insert the DPN-100 into the target SFP socket until you feel (or hear) the latch mechanism “click.”
- Verify that the DPN-100 is seated properly by holding the DPN-100 at the sides and trying to remove it with the SFP bail in the locked position. If the DPN-100 can be removed, reinsert it and press hard on the SFP dust cover to insert the module more securely.
Configuration
Fiber Connection to the DPN-100
- Remove the DPN-100 module dust cover and keep it for future use.
- Remove the dust cap from the tip of the GPON fiber cable and keep it for future use. Clean the tip if necessary.
- Connect the fiber cable to the SC/APC port on the DPN-100.
Warning: Invisible LASER radiation may be emitted from the end of the fiber and/or from the DPN-100. Take all necessary precautions to avoid exposure to this radiation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>