safetrust BAB78490suM Relay Installation Guide

Safetrust BAB78490suM Relay

Safety ­and ­use­ instructions

Important recommendations for Safety instructions

• Please read these instructions carefully before first use. This product has been designed for domestic and indoor use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
• Never unplug the appliance by pulling the power cord. Always unplug your appliance:
  • before filling the water tank or rinsing the boiler,
  • before cleaning the appliance,
  • after each use.
• The appliance will not work without the limescale collector (depending on the model).
•  The appliance must be used and placed on a flat, stable, heat and water-resistant surface. When you place the iron on the iron rest, make sure that the surface on which you place it is stable.
• This appliance is not intended to be used by persons (including children) with reduced or impaired physical, sensory or mental capabilities or persons lacking appropriate knowledge or experience, unless a person responsible for their safety provides either supervision or appropriate instructions concerning use of the appliance prior to its use.
•  Children should be supervised to ensure they do not play with the appliance.
• This appliance may be used by children aged 8 or over and persons lacking appropriate knowledge or experience or persons with reduced or impaired physical, sensory or mental capabilities provided that they have been thoroughly instructed regarding use of the appliance, are supervised, and understand the risks involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down.
• The surfaces which are marked with this sign, the soleplate and steam cord are very hot during the use of the appliance. Do not touch these surfaces before the appliance has completely cooled down.
•  Never leave the appliance unattended when it is connected to the mains. Before storing the appliance, once it is unplugged, please wait until it has cooled down (around 1 hour).
•  Do not use any descaling products (vinegar, industrial descaling products, etc.) to rinse the boiler: they may damage the appliance.
•  Before rinsing the boiler/rinsing the anti-calc collector (depending on model), always make sure that the appliance is completely cooled down and has been unplugged for at least 2 hours before unscrewing the boiler rinse cap/or anti-calc collector.
• Warning : if the boiler cap or the boiler rinse cap (depending on the model), is dropped or severely knocked, have it replaced by an Approved Service Centre, as it may be damaged.
•  Never fill the appliance directly from the tap.
•  The filling, or descalcifying, or rinsing, or inspection apertures that are under pressure, must not be opened during use.
•  The appliance must not be used if it has been dropped, if it has any visible damage, if it leaks, or if it functions abnormally in any way. Do not attempt to dismantle your appliance: have it examined at an Approved Service Centre to avoid any danger.
•  Check the electrical power cord and steam cords for signs of wear or damage prior to use. If the electrical power cord or the steam cord is damaged, it must be replaced by an Approved Service Center to avoid any danger.
• Accessories, consumables and end user replaceable parts must be only purchased from an Approved Service Centre.
•  For your safety, this appliance conforms to all applicable regulations (Low Voltage Directive, Electromagnetic Compatibility, Environment, etc).
• Your steam generator iron is an electrical appliance: it must be used under normal conditions of use. It is designed for domestic use only.
•  It is equipped with 2 safety systems:
  • a pressure release valve designed to avoid excessive pressure. In the event of malfunction, the valve releases excess steam.
  • a thermal fuse to avoid overheating.
•  Always plug your steam generator iron:
  • into a mains circuit with voltage between 220 V and 240 V (Alternating current only),
  • a socket outlet with an earth connection.
• Connecting to the wrong voltage may cause irreparable damage to the appliance and will invalidate your guarantee.
•  Do not use an extension lead. If you accept liability for doing so, only use an extension lead which is in good condition, has a plug with an earth connection and is suited to the power rating of the appliance.
• Completely unwind the power cord before plugging into an earthed socket outlet.
•  The soleplate of your iron, the steam cord, and the iron rest on the base unit can reach extremely high temperatures, and can cause burns: do not touch them. Never touch the electrical power cords with the sole plate of the iron.
• Always use a vented/mesh ironing board to prevent water spots on clothes and to avoid hot steam venting sideways.
•  Your appliance emits steam, which can cause burns. Always handle the iron with care, especially when ironing vertically. Never direct the steam towards people or animals.
• Never iron clothing on a person, always use a hanger. Never iron in a seated position with your legs under the iron board.
• Never immerse your steam generator iron in water or any other liquid. Never place it under a running tap.

What water to use?

Tap water:
Your appliance has been designed to use tap water. If your water is very hard, mix 50% tap water and 50%bottled demineralised water. In some coastal areas, the salt content of the water may be high. In such cases, use only demineralised water.

Water softener:
There are several types of water softeners available and most of them can be used in the generator. However, some softeners (especially those that use chemicals such as salt) may cause white or brown streaks. This is often the case when using water from filtering jugs. If you experience this sort of problem, we suggest you try using untreated tap water or bottled water.

Attention:
Never use rain water or water containing additives (such as starch, fragrances or water from household appliances). These additives may affect the properties of the steam, and together with high temperatures can cause deposits to form in the steam chamber which could stain your laundry and lead to premature aging of the appliance.

PLEASE RETAIN THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE

Environment protection first
your appliance contains valuable materials which can be recovered or recycled. ‹Leave it at a local civic waste collection point.

Problems with your iron?

pipes because you are using steam for the first time or you have not used it for some time.| Press the steam control button holding the iron away from your ironing board until the iron produces steam
Water streaks appear on the laundry.| Your ironing board cover is saturated with water because it is not suitable for use with a steam generator.| Check that your ironing board is suitable (vented/mesh type ironing board to avoid condensation).
White streaks come out of the holes in the soleplate.| Your water tank has a build-up of scale because it has not been rinsed out regu- larly| Rinse the anti-calc collector (see the “descaling your generator” section or “rinse the boiler”.(depending on model).
Brown streaks come out of the holes in the soleplate and stain the laundry.| You are using chemical descaling pro- ducts or additives in the ironing water. Over use of the steam button| Never add any products to the water tank (see section on “What water to use?” ).

Do not hold down the steam button for too long, particularly whilst the pump is pumping more water into the boiler tank.

The soleplate is dirty or brown and may soil clothes.| You are ironing at too high a tempera- ture.| Clean the soleplate as indicated in the user manual Use a lower temperature.
The soleplate is scratched or damaged.| You have positioned your iron flat on a metallic iron support or ironed over zips or metal fasteners.| Always stand the iron upright or on the iron rest.
The red “WATER” light is on.| The water tank is empty.| Fill the water tank.
The “anti-calc” light flashes.| You have not pressed the “OK” restart button.| Press the “OK” restart button on the control panel until the light goes out.
The steam generator does not switch on or the iron indicator light and the “ON-OFF” light are not lit up.| The “AUTO-OFF” system was activated after 30 minutes of non-use and has switched off your steam generator.| Press the “ON- OFF” restart button located on the control panel.
The red “WATER” light is flashing and the “ON- OFF” button does not work.| The appliance has been stored in a cold place (approximately <10C°).| Unplug the appliance Wait 3 hours for the appliance to reach room temperature.

Depending on model
If you have any problems or queries please call our Customer Relations team first for expert help and advice.

References

• Safetrust Inc - Touchless Identity Solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>