safetrust DAEjYW15acU IoT Sensor User Guide
- June 4, 2024
- safetrust
Table of Contents
8845-100 Quickstart Guide
User Guide
In the box
|
---|---
6-32 x .375” Phillips flat head screw
Option 2: Secures the top and bottom casing together| Optical tamper
reflective post
Adhered to the surface where the sensor is being mounted
|
Nylon wall plugs
Used to brace the screws inside the wall| Sheet metal screw
SCR PTP, 2X6MM BLUE, ZINC CR3 For mounting to wall
Mounting Template:
How to use
Inside the box, you will find a folded piece of paper that includes the
mounting template. Begin by trimming the template along the thicker dotted
line, being mindful not to cut the other dotted lines in the diagram.
Then tape the template to the installation site, ensuring you remove the
cutout piece from the template where the reflective tamper post will be
mounted.
*The diagram in this document is not to scale and cannot be substituted for the official mounting template.
What you’ll need
- A working internet connection
- Cable, 5-12 conductors (Wiegand), 4 conductors Twisted Pair Over-All Shield and UL approved, Belden3107A or equivalent (OSDP)
- Linear DC power supply
- Metal or plastic junction box
- Drill with various bits for mounting hardware
Installation
For a wall-mounted installation, begin by pre-drilling your holes and inserting the nylon screw plugs provided to support the weight of the reader. Once secured to the wall, you can fix the black plate to the wall using the screws (SCR PTP, 2X6MM BLUE, ZINC CR3) provided.
The next step is to connect the wires as per the wiring table above.
Once the back plate has been fitted and the wiring is complete, the top casing can be inserted onto the bottom casing like shown above.
Complete the hardware installation by fixing either the snake eye screw (SMF
632X5/16″ SS) or a Phillips screw (SMF #6-32X5/16″ SS) to the bottom casing.
Configuration
Open the Safetrust Wallet APP and select the Manage Sensor tab. Make sure your system admin has set you up with this role.
With the Admin Installer tab open from the App, bring the phone in range of the IoT Sensor, and once visible from the App, highlight and select “Configure”.
- Choose an Identity System.
- Specify the Type of access from the dropdown (eg. Door, Gate, etc.)
- Assign a short Name and Description using alphanumeric characters.
- Choose an Output for the sensor (the default is set to Wiegand).
When the IoT Sensor information is saved successfully to Credential Manager and assigned to the Identity System, the new description will appear in the Manage Sensor tab with a unique serial number assigned.
Testing
Access with cards
Status LED
| Solid red
Indicates idle mode
---|---
| Flashing red
Powering up
| Solid green
Success
| Flashing green
The credential is read and access is granted
Access with mobile
Status LED
| Solid red
Indicates idle mode
---|---
| Flashing red
Powering up
| Solid Blue
Success
| Flashing Blue
The credential is read and access is granted
Regulatory Information
FCC: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Canada Radio Certification: This device complies with Industry Canada license-
exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of
the device.
CE Marking: Safetrust hereby declares that these proximity readers are in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Support
Thank you for purchasing the Safetrust IoT Sensor Mullion.
If for any reason you need assistance with your installation, please contact
your local Sales representative.
Sincerely The Safetrust Team
www.safetrust.com/support
Safetrust Inc. | safetrust.com
[email protected]