LTECH EDT1 Dali Touch Panel Controller Instruction Manual
- June 6, 2024
- LTECH
Table of Contents
LTECH EDT1 Dali Touch Panel Controller
Product Features
- Adopt DALI standard protocol IEC62386-102,207,209.
- Support switch, dimming and color adjustment function; zone control is available.
- DALI bus supply power.Easy to set addresses.
- Support scene, group, unicast and broadcast mode.
- Touch vibration.
Technical Specification
DALI touch panel
- Power supply: DALI power
- Control mode: EDT1 DIM,EDT2 CT,EDT3 RGB,EDT4 RGBW
- Signal: DALI
- Working temp: -30°C~55°C
- Dimensions(LxWxH): 86×86×37mm
- Package size(LxWxH): 113×112×50mm
- Weight(G.W.): 240g
Dimensions
Unit: mm
Panel Key Description
Brightness adjustment: click , then slide the color circle after the key
light is on.CT adjustment: click 
, then slide the color circle after the key light
is on.
Brightness adjustment: click , then slide the color circle after the key
light is on.RGB adjustment: click , then slide the color circle after the key
light is on. Saturation adjustment: click , then slide the color circle after
the key light is on.
Brightness adjustment: click , then slide the
color circle after the key light is on. RGB adjustment, click , then slide the
color circle after the key light is on. White light adjustment, click C , then
slide the color circle after the key light is on.
Terminals
Installation Instructions
Junction boxes are as follow:
Wiring Diagram
DALI Address Settings
Scene mode
Z is for scene setting, corresponding keys on the panel are A, B, C and D
.
E.g. Z points to 2, the first scene value is 2. the scene value of A, B,
C, D is 2, 3, 4, 5.
E.g. Z points to E, the first scene value is 14. the scene value of A, B,
C, D is 14, 15, 0, 1.
Unicast mode
For unicast mode, please point X to 0-6.
1, 2, 3, 4 of the panel are unicast keys,
1 address value = X×10+Y, 2,3,4 address value are incremented by 1 in order.
E.g. how to set 1 address value = 40?
1 address value = X×10+Y=4×10+0=40
that X points to 4, Y points to 0, now 1,2,3,4 unicast value are 40, 41, 42,
43.
Group mode
For group mode, please point X to 7. 1, 2, 3, 4 of the panel are group keys.
E.g. Y points to 5,
then the first group value is 5,
1,2,3,4 group address value are 5, 6, 7, 8.
E.g. Y points to E,
then the first group value is 14,
1,2,3,4 group address value are 14,15, 0, 1.
Broadcast mode
For broadcast mode, please points X to 8 or 9.
1, 2, 3, 4 of the panel are broadcast keys, touch any one of them is workable.
Attentions
- This product must be installed and adjusted by a qualified professional.
- This product is non-waterproof (special models excepted). Please avoid the sun and rain.
- When installed outdoors, please ensure it is mounted in a water proof enclosure.
- Good heat dissipation will extend the life the product. Please install the product in a environ-ment with good ventilation.
- When you install this product, please avoid being near a large area of metal objects or stacking them to prevent signal interference.
- Please keep the product away from a intense magnetic field, a high pressure area or a place where lightning is easy to occur.
- Please check whether the working voltage used complies with the parameter requirements of the product.
- Before you power on the product, please make sure all the wiring is correct in case of incorrect connection that may cause a short circuit and damage the components, or trigger a accident. If a fault occurs, please do not attempt to fix the product by yourself. If you have any question, please contact the supplier.
- This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to contact our official distributors if you have any question.
Warranty Agreement
- Warranty periods from the date of delivery: 5 years.
- Free repair or replacement services for quality problems are provided within warranty periods.
Warranty exclusions below:
- Beyond warranty periods.
- Any artificial damage caused by high voltage, overload, or improper operations. Products with severe physical damage.
- Damage caused by natural disasters and force majeure.
- Warranty labels and barcodes have been damaged.
- No any contract signed by LTECH.
- Repair or replacement provided is the only remedy for customers. LTECH is not liable for any incidental or consequential damage unless it is within the law.
- LTECH has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.