LTECH EBOX-AP Wireless Repeater Instructions
- June 5, 2024
- LTECH
Table of Contents
LTECH EBOX-AP Wireless Repeater
System diagram
EBOX-AP wireless repeater applies LT-BUS wireless communication protocol for wireless signal extension, it is not necessary to pair via its factory default setting, greatly ensures its stability and wide controlling area among LT-BUS wireless communication devices, removing the complex cabling procedure, to make it become easier for new or retrofit installations.
Technical Specifications
EBOX-AP Wireless Repeater
- Input Voltage: 5~24Vdc
- Wireless Distance: 30m (eye to eye)
- Wireless Signal: RF 2.4GHz
- Working Temp: -30℃~55℃
- Dimensions: L55×W55×H21(mm)
- Package Size: L65×W65×H26(mm)
- Weight(G.W.): 70g
Product Size
Terminals
Learning Method:
Interlayer diagram
The repeater leaves the factory by default and can be used without learning,
but only for single-layer communication (the default is layer 1). For long
transmission distances, multi-level learning (up to 8 layers) is required. For
example:
Interlayer learning method (e.g.: B matches up with A)
Long press the match key of the B repeater for about 3 seconds until the
internal indicator light flashes and press A’s match key within 10 seconds. At
this time, B repeater’s indicator lights keep on after flashing 3 times,
matching successfully. The other layers learn the same way. Clear ID code:
Long press “match key” for 6s, the indicator light flicker 5 times slowly,
clear code successfully.
Stratograms
A repeater between adjacent layers can form network communication.
For example
Panel & repeater application example
WiFi gateway & repeater application example
Multi-panel control application example
Documents / Resources
|
LTECH EBOX-AP Wireless
Repeater
[pdf] Instructions
EBOX-AP, Wireless Repeater, EBOX-AP Wireless Repeater
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>