LTECH SPI-16S Mini LED Fantastic Controller Instructions
- June 5, 2024
- LTECH
Table of Contents
LTECH SPI-16S Mini LED Fantastic Controller
SPI-16S is a Mini LED pixel controller, equipped with RF remote M16S, almost
able to control all IC-driven LED lights. Compact and powerful, various built-
in changing effects and customized scene modes can bring you fantastic color!
By RF remote control M16S, you can select from a variety of dynamic lighting
effects, set controlled pixels quantity, adjust the changing speed and
brightness, change the lighting moving direction, adjust RGB sequence, select
the IC type, store and play customized scene etc.
Product parameter
M16S Remote
- Working Voltage: 3V (battery CR2032
- Wireless Signal: RF 2.4GHz
- Changing Mode: 16 kinds
- Working Temperature: -30°C~55°C
- Dimensions: L104×W58×H9(mm)
- Weight(N.W.): 42g
SPI-16S Controller
- Power Input: 5~24Vdc
- Output: SPI
- Wireless Signal: RF 2.4GHz
- Working Temperature: -30°C~55°C
- Pixel Range: 8~1020px
- Dimensions: L135×W30×H20(mm)
- Weight(N.W.): 52g
- Package size: L132×W198×H22(mm)
- Total weight(G.W.): 145g
Connect power supply to pixel LEDs separately, in case of overvoltage, overcurrent to the receiver. Receiver only supply a signal to the LEDs.
System diagram
Product dimension
The remote instruction
The Learning ID Method
The receiver and remote are Pre-synced at factory. If deleted accidentally, the sync method is as follows (multiple remotes could be synced to one receiver):
Learning ID
Short press “ID learning button” on SPI-16S receiver, the running light is on. Then press any key on M16 remote , the running light flicker several times, activated.
Canceling ID
Press “ID learning button” on SPI-16S receiver for 5s, the running light
flicker several times, canceled.
Other Setting Instructions of Remote
-
Loop playback: Short press key, then continuous press any 0-15 numeric keys, last press key to finish. Controller will play cycle the corresponding mode of the numeric key.
-
After the remote being paired with the controller, the IC model, pixel ranges and RGB sequence can be set by the remote.
-
By factory default, controller works with TM1809IC pixel light. If work with different IC model, please setting follow below instructions. This controller is compatible with following IC models:
TM1803/TM1804/TM1809/TM1812/TM1814/TM1914/TM1914A/UCS1903/UCS1909/ UCS1912/UCS2903/UCS2904B CS2909/UCS2912/UCS5603A/UCS6909/UCS6912/WS2801/WS2803/WS2811/WS2812/WS2812B/ WS2821/APA102/AA104/KL590/KL592D/LPD6803/LPD1101/LPD8803/LPD8806/P9813/TLS3001/TLS3002/P943/SK6812(RGB)/GS8206 (BGR)/GS8208/SM16703 in factory default. -
Manipulate table for choosing ICs, RGB order or pixel No.
[Attn]: The running light of SPI-16S controller flashes 2s means set
completed.
When setting IC type, pixel number and RGB order, select multiple keys at
uniformed speed. Not too fast.
Terminal description
Wiring diagram
No further notice if any changes in the manual. Product function depends on the goods. Please feel free to contact your supplier if any question.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>