Hantat HBM003 SmarterMike User Manual
- June 6, 2024
- Hantat
Table of Contents
H-antat ant HBM003
Hentai x SightChamp
SmarterMike+ Product manual
Please read this manual carefully and keep it properly before use
Packing List
Device Instructions
- Start charging when the LED indicator lights in red.While the battery is fully charged,the indicator lights out.
- Please make sure the battery is fully charged for the first time.
Bluetooth connection
-
For the First Time
a)Place the SmarterMike+ next to the phone within 1-meter b)Press the on/off for 3 seconds to enter pairing mode and the LED indicator flashing in blue. c)Enter the setting page to switch on the Bluetooth of the phone. And press the device name to establish a connection. d)The SmarterMike+ blue light flashes every five seconds while the Bluetooth connection is established. -
Automatic connecting (after the first time paired)
Press the on/off button for 3s to power on the SmarterMike+ and switch on the Bluetooth of the phone as well. The connection will be established automatically and the indicator flash in blue every 5s.
Quick Start Manual
Before audio and video recording:
Device connection: connect SmarterMike+ to the mobile phone via Bluetooth
Parameter adjustment: Monitoring adjustment: Listen with headphones, monitor
and adjust gain levels and other settings via the app Noise reduction
adjustment: an appropriate level of noise reduction can be selected based on
different scenarios Input adjustment: adjust microphone gain in the app Video
parameter adjustment: the resolution and aspect ratio of video can be adjusted
Quick Start Manual
Microphone toggle:
Select the built-in microphone of the device or an external microphone for
input (such as the built-in microphone of the earphone). Select both at the
same time to conduct stereo recording. Please note to keep proper space
between microphone and sound source while recording Import of background
music:
enable the mixing function within the SmartMike+ App and play music from a 3rd
party software on the phone, then switch back to the SmartMike+ App to achieve
real-time background music mixing
Quick Start Manual
Start recording: After adjusting the appropriate audio/video and interface
parameters, Users can click the record or shoot button to start recording or
click the power button of the SmarterMike+ device once to start audio/video
recording
During recording: Microphone gain, monitoring, noise reduction level, and
music volume can be adjusted in real-time
End of recording: Click the audio/video recording button, or click the
power button of the AudioWow device once to finish recording
Product Application Scenarios
TVlog shooting: Please operate according to the manual and please note to set proper parameters for audio and video settings: select microphone, positions and space between recording sound source and pickup microphone, as well as noise reduction level, etc
Product Application Scenarios
©Podcast creation: Follow the Quick Start to operate, turn on the mixing function, open other music software on your phone to play music, switch back to SmartMike+ APP, and you can achieve music Real-time accompaniment, you can adjust gain, background music, and noise reduction
Product Application Scenarios
®Nterview: Please operate according to the manual. Enable mic input for
SmarterMike+ within the microphone selection to pick up the voice of the
interviewee and enable the phonemic input to pick up voices of the
interviewer. Al-powered voice subtitle transcriptions can be added after
recording
Precautions
- Do not disassemble the device
- Do not overheat the device, including exposure to the sun for a long time, close to fire, or similar environments
- The battery cannot be replaced by yourself. If it is necessary to replace it, please contact professional maintenance personnel
- Do not modify the device, connect antennas, or use other transmitting antennas
- Please clean the device with a soft dry cloth
- Do not put it in water or other liquids
- Direct or indirect losses caused by violation of usage rules are not within the scope of the warranty
- Do not swallow it.
- If you have any questions or problems about this device not covered in this manual, please contact us at www.hantat.com
FCC Warning Message
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: V3N-HANTAT-HBM003
List of toxic and hazardous substances
Harmful substances
| (Pb)| (Hg)| (Cd)| (Cr(VI))| (PBB)| (PBDE)
Built-in circuit board| X| 0| 0| 0| 0| 0
Outer case| X| 0| 0| 0| 0| 0
USB| X| 0| 0| 0| 0| 0
This form is based on regulations SJ/T 11364.
O: Percentage of the hazardous substance in all homogeneous materials of the
component is under the specified limit of GB/T 26572. X: Percentage of the
hazardous substance in at least one homogeneous material of the component is
over the specified limit of GB/T 26572.
APP Download
Download app get more powerful recording and noise reduction function
|
---|---
https://play.google.com/store/apps/details?id=com.sabine.mike|
https://play.google.com/store/apps/details?id=com.sabine.mike