ASKEY 6742 O2 HomeBox Wi-Fi Router User Guide

June 6, 2024
ASKEY

ASKEY 6742 O2 HomeBox Wi-Fi Router

Safety instructions

IMPORTANT:

Before using the HomeBox, read these instruc-tions carefully and keep them for future reference. Hand over these instructions to any new owner of the HomeBox.

WARNING:

Electrical voltages at mains connections and on telephone and network cables are dangerous! Failure to observe the safety instructions can lead to hazardous situations that may not only result in major damage to property, but also in serious injury or death.

  • The HomeBox must not be opened.
  • Do not install the HomeBox or plug or unplug any cable connections during a thunderstorm.
  • The HomeBox has been designed for use only in dry building interiors.
  • The mains socket must be located close to the HomeBox and be easily accessible.
  • Route the cables so that no one can step on or trip over them.
  • Do not allow liquids to enter the HomeBox interior, as this may result in an electric shock or short circuit.
  • Avoid exposing the HomeBox to direct sunlight.
  • Before drilling, ensure no building services equipment is present at the drilling location. Damage to gas, electricity or signal lines, or to water pipes may be hazardous to life and may damage property.
  • The HomeBox may only be operated using the original power supply unit (included in delivery).
LED Signal Status
Power Flashing System powering up
Continuous System powered up and in operation
Off Power supply disconnected or general device error
DECT Continuous DECT function switched on
Flashing DECT searching for new device
    Off DECT function switched off
DSL     Slow flashing Pilot signal transmitting
    Fast flashing œ HomeBox 6741 synchronising
Continuous DSL connection established
Off œ HomeBox 6741 not receiving DSL signal
Internet     Flashing Data transmitting
    Continuous Connected to internet
Phone Flashing Active call
Continuous Active line
Off Inactive line

We are delighted that you have chosen an œ product. You can now enjoy the many benefits of your new DSL connection

Included in delivery

Frequency bands for the integrated WLAN module

  • 2400 – 2483.5 MHz, max. transmission power 100 mW
  • 5150 – 5350 MHz, max. transmission power 200 mW (only indoor operation is permitted for this range)
  • 5470 – 5725 MHz, max. transmission power 1000 mW
  • DECT: (1880 – 1900 MHz), max. transmission power 250 mW

Your œ HomeBox 6742 in detail LEDs

3-step easy installation

Prepare installation

Connect the œ HomeBox to your indoor TAE socket (middle socket) or the fibre optic junction box (lower connection). The type of connection depends on the network equipment being used. More information can be found in the order confirmation from œ . For TAE connec-tions, use the grey DSL cable. For fibre optic connections, use the yellow LAN cable. You can then connect your phones to the œ HomeBox and establish a WLAN connection with your PC (see „WLAN first-time setup“ below). To do this, switch on the œ HomeBox.

Set up internet connection

Now open an internet browser via a device connected to the œ HomeBox and enter the address œ.box or 192.168.1.1. The setup wizard that opens automatically assists you in entering a password, configuring the internet connection and activating the connection. More information is available in the manual which can be downloaded from http://www.askey.com.tw/germany_o2/.

Start surfing and phoning

Your œ HomeBox 6742 is now configured for internet access and phoning. If necessary, use the phone menu to configure the connected telephones. The HomeBox is factory set for all connected telephones to ring for incoming calls.

WLAN first-time setup

  1. Switch on your device‘s WLAN function (on your PC, smartphone, tablet, etc.) and make sure that the WLAN function is also activated on your œ HomeBox (WLAN LED lights up). If not, activate it by pressing the button on the HomeBox‘s right.
  2. N ow connect your device to the œ HomeBox. This procedure differs for different operating systems (Windows, Android, macOS, Linux, etc.). Refer to your device‘s manual for more information.
  3. Select the wireless network for your œ HomeBox 6742. The network name (SSID) and the network key (WLAN key) can be found on the type plate on the rear of the œ HomeBox 6742.
  4. Click on „Connect“ and enter your WLAN network key (WLAN key).
  5. Alternatively, you can scan the QR code for easy WLAN setup and connection.
  6. The WLAN connection is now setup.

WPS setup

WPS (WLAN Protected Setup) allows you to easily and quickly connect new WLAN devices to your wireless home network. Devices to be connected must support the WPS function.

  1. Press the WLAN button on the œ HomeBox for at least 3 seconds. The WLAN LED will flash green continuously.
  2. Within 2 minutes, you can now activate the WPS function on the WLAN device. Follow the operating instructions of the WLAN device.
  3. A successful WLAN connection is displayed on the WLAN device, and the œ HomeBox‘s WLAN LED lights up, either permanently or flashing (when there is data traffic).

Connecting your œ HomeBox 6742: The options

  • Below are connection examples to your œ HomeBox 6742
  • Connect the equipment accordingly

ASKEY-6742-O2-HomeBox-Wi-Fi-Router-FIG-4

more information

Visit our website at http://o2.de/hilfe/o2homebox for a short guide in English/Turkish/Russian. Here you will find the first steps to set up your œ HomeBox 6742 as well as the installation video for the œ HomeBox 6742.

How to contact us

According to rates for calls to German landline or mobile networks

Open source license information

This product contains software licensed under Open Source Code Licenses and is provided to you subject to the terms of those licenses. A copy of the license text can be found in the user interface of the unit in the main menu under system – legal Information, and on the internet at http://www.askey.com.tw/germany_o2/. You can obtain a complete machine- readable copy of the source code within 3 years of this product being placed on the market by contacting us at [email protected].tw. European regulations: This product has been designed, tested and manufactured in accordance with European Directive 2014/53/EU. The œ HomeBox 6742 is a class 2 device and may only be used in Germany. Operation of this product in any other country is not permitted. The EC Declaration of Conformity can be found at http://www.askey.com.tw/germany_o2/. Telefónica Germany GmbH & Co. OHG, Postfach 60 09 40, 22209 Hamburg 101913 02/21 v.1.1

Do you need help with installation?

Scan the QR code or visit our website at http://o2.de/hilfe/o2homebox to watch the installation video for the œ HomeBox 6742.

Note : After setting up the router, install the Service Suite from our website. This free œ software helps with internet access and optimises your WLAN connection.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ASKEY User Manuals

Related Manuals