ASKEY NDQ1300-SA 5G Sub6 USB Dongle User Guide
- June 12, 2024
- ASKEY
Table of Contents
5G Sub6 USB Dongle Askey NDQ1300 –SA
Quick Start Guide
Product Overview
Model Name | NDQ1300-SA |
---|---|
Frequency Band | N48,N77/n78 for US and EUR,n79 for Japan |
Dimension | 77.5×77.5×16.5mm |
Weight | TBD |
Color | White |
Operation Voltage | 5V |
maximum output power | 10W |
Manufactory | Askey |
Accessory | Y-Cable (Optional) |
Type C USB | 3.1 with Water Proof of IP65 |
LED | Power and Signal LED |
This Askey 5G mobile device supports Sub 6GHz for 5G NR SA mode network. It offers the flexibility with combining 5G NR mobile broadband access. It provides the much higher download speed for users to enjoy an exciting experience on the wireless applications.
Insert SIM card
|
---|---
Open the back cover| Push the SIM card cover to the left
|
Flip the SIM card cover| Put the SIM card and Push the SIM card cover to the
right
Let’s get Started
- Insert the Dongle into the Host by USB and waiting device boot up
- Open browser and browse http://my.usb or http://Sub.net_IP
- The default user name and password are admin
LED Indicators
INDICATOR| DESCRIPTION| RAT Status
(led#1)| Data Status
(led#2)
---|---|---|---
System| System Booting| |
System Error| |
Connection| 5G SA Connected| |
SIM Not Ready| |
Data Activity| Home Network| |
Roaming Network| |
Firmware Status| Upgrading| |
| Yellow Blinking
---|---
| Red Solid
| Purple Solid
| Red Blinking
|
Green Blinking
| Blue Blinking
| Red/Blue Blinking back and forth
Certs
CE compliance statement
This equipment complies with Directive 2014/53/EU radiation exposure limits
set forth for an uncontrolled environment. End user must follow the specific
operating instructions for satisfying RF exposure compliance. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
The portable device is designed to meet the requirements for exposure to radio
waves established by European Union market (France). These requirements set a
SAR limit of 2W/kg averaged over ten grams of tissue. The highest SAR value
XXW/kg reported under this standard during product certification for use when
properly worn on the body. (Recommended use distance 5mm)
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC SAR statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End user must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not
be co- located or operating in conjunction with any other antenna or
transmitter.
The portable device is designed to meet the requirements for exposure to radio
waves established by the Federal Communications Commission (USA).
These requirements set a SAR limit of 1.6 W/kg averaged over one gram of
tissue.
The highest SAR value reported under this standard during product certification
for use when properly worn on the body (Recommended use distance 5mm).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>