MEARI Snap 20S Battery Camera User Guide
- June 6, 2024
- MEARI
Table of Contents
MEARI Snap 20S Battery Camera
What’s in the box
Please consult this checklist for all parts.
Description
- Power Port DC 5V±10%
- ON/OFF button Press the button for 3 seconds to turn on/off the camera Status light
- Solid red light on (3~5s): network is malfunctional
- SD card slot Support local SD Card storage (Max.128G)
- Reset Press and hold on for 5 seconds to reset the camera
- Battery 9600mAh rechargeable Li batteries
INSTALLATION
Bracket (A) Installation
Bracket (B) Installation
Connection
Download
Smartlife or Tuya Smart is available for both iOS and Android OS. Search the
name ‘Smartlife’,’Tuya Smart’ in App Store or Google Play, or scan the QRCode
to download the App. You can select the App according to needs.
Set up router
The router supports the 2.4GHz WiFi (doesn’t support the 5GHz), and is
connected to the WiFi network.Please set the parameters of the router before
connecting the WiFi network, and record the SSID and password of your WiFi.
Registration process
- Step 1 Open the Smart Life App, click “Sign Up”, read the “User Agreement Privacy Policy” and click “Agree”
- Step 2 Input a legal and valid Mobile number or Email address and click “Get Verification Code”. Input the verification code to log in.
QR Code Configuration
- Open the Smart Life App, click “My” > > “Home Management” > “Create a home”, and you can customize the home name and related settings .
- Click “Add Device” or “+ “, and then select “Security & Sensor” > “Smart Camera” to add camera.
Note:
- Camera only supports 2.4GHz WiFi network.
- The number of bits in the ssid and passwords of the router should not exceed 24 digits.
In this interface, you should scan the QR code in your phone with thecamera,when the camera comes out “dong dong dong”. And you can complete the configuration about 30s.
When connecting, you should make sure your router,mobile,and camera are as close as possible.When camera added successfully,click “0” you could also DIV the camera’s name.
Settings
In “Smart Camera” interface,click “0”,you can set the camera common functions.
FAQ
-
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again. -
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App. -
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device again by the App. -
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good. -
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened.
Functions
Remote wake-up
The camera will be in a sleep mode to save power; you can have a preview in
App to wake up the camera remotely.
Two-way audio
When you see a visitor from the live view of camera, you can call and then
communicate with the vistor by your App function.
PIR
When someone passes by, an alarm will be triggered and sent to your phone.
Low battery alarm
You can set a low-battery alarm threshold in your phone App. The threshold is
set to a minimum of 10% and a maximum of 50%. When the battery power of the
camera is lower than the set threshold, the App will have a reminder.
Record
Using SD card or Opening the Cloud-Storage Service, to keep recording for
every moment.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provide with antenna
installation instructions and consider removing the nocollocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>