CONAIR 359 Motor Styler Instruction Manual
- June 6, 2024
- ConAir
Table of Contents
CONAIR 359 Motor Styler
INSTRUCTION & STYLING GUIDE
MODEL 359
The InfinitiPRO by Conair® Mini Pro Plus AC Styler is very effective, even at
lower temperatures, and helps create healthier-looking, shiny, more man-
ageable hair with maximum styling control. POWERFUL AC MOTOR delivers fast
airflow for styling ease and provides up to 3x longer life.* THE IONIZING
FUNCTION generates a cloud of negative ions that can:
- help reduce frizz by up to 75%**
- neutralize the generally positive charge on flyaway, frizzy hair
- eliminate static electricity
- contribute to shine
select your setting
GETTING TO KNOW YOUR DRYER
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety precautions should always be taken, including the following:
READ ALL INSTRUCTIONS BEFORE USING KEEP AWAY FROM WATER DANGER – Any hair
dryer is electrically live even when the switch is off. To reduce the risk of
death or injury by electric shock:
- ALWAYS UNPLUG IT IMMEDIATELY AFTER USING.
- Do not use while bathing or in the shower.
- Do not place or store appliance where it can fall or be pulled into a tub or sink.
- Do not place in, or drop into water or other liquids.
- If an appliance falls into water, unplug it immediately. Do not reach into the water.
WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:
- This appliance should never be left unattended when plugged in.
- This appliance should not be used by, on, or near children or individuals with certain disabilities.
- Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water. Return the appliance to a Conair Service Center for examination and repair.
- Keep the cord away from heated surfaces. Do not pull, twist, or wrap line cord around dryer, even during storage.
- Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
- Never use while sleeping.
- Never drop or insert any object into any opening.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not use an extension cord to operate dryer.
- Do not direct hot air toward eyes or other heat-sensitive areas.
- Attachments may be hot during use. Allow them to cool before handling.
- Do not place appliance on any surface whileit is operating.
- While using the appliance, keep your hair out of it. Keep your hair away from the air inlets.
- Do not use with a voltage converter.
- This appliance is not a toy. Keep away from children.
OPERATING INSTRUCTIONS
This appliance is intended for household use. Use on Alternating Current (60 hertz) only. Standard dryers are designed to operate at 110 to 125 volts AC. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
IMPORTANT 1600 WATT OPERATING GUIDE
Use of this dryer on the same circuit or fuse with other electrical
products or appliances may trip a 15 amp circuit breaker or blow a 15 amp
fuse. NEVER replace the fuse with one rated higher than the capacity of the
circuit. Doing so could result in an electrical fire. Blocked or clogged air
intake vents will cause the dryer to overheat. If overheating occurs, an
automatic safety device will shut the dryer or the heat off to prevent damage
or personal injury. If the unit or the heat turns off, unplug the cord and
allow the dryer to cool for 10 to 15 minutes before restarting. Make sure the
air vents are clean.
CAUTION
NEVER allow the power supply cord to be pulled, twisted, or severely bent.
Never wrap the cord tightly around the dryer. Damage will occur at the high
flex point of entry into the dryer, causing it to rupture and short circuit.
Inspect the cord frequently for damage. Stop use immediately if damage is
visible or unit stops or operates intermittently. If the cord or dryer is
damaged or does not operate properly, return it for repair to an authorized
Conair Service Representative only. No repairs should be attempted by the
consumer.
STORAGE – Important
When not in use, your dryer should be disconnected, allowed to cool and stored
in a safe, dry location, out of reach of children. Do not wrap line cord
around dryer. Allow the cord to hang or lie loose and straight at the point of
entry into the dryer.
CHECK ALCI SAFETY FEATURE EVERY TIME YOU USE APPLIANCE
This appliance is equipped with an Appliance Leakage Circuit Interrupter
(ALCI), a safety feature that renders it inoperable under some abnormal
conditions, such as immersion in water. To make sure the ALCI is functioning
properly, perform the following test. The purpose of this test is to allow you
to make sure the water sensing system (ALCI) is working.
- 1. Plug in the appliance and press test button on plug.
- The appliance will stop working. There will be an audible click and reset button will pop out. This indicates the ALCI is functioning properly.
- To reset ALCI, unit should be unplugged. Then push reset button in and reinsert plug into outlet.
- If ALCI is not functioning properly, return appliance to nearest service center.
- It is important that if immersion occurs, this unit be brought to a service center. Do not try to reset.
- Be sure to repeat test every time you use theunit to confirm ALCI is operational. Should the appliance go off and the reset button pop up during use, this could indicate a malfunction in the unit. Remove plug from outlet and allow the appliance to cool. Reinsert plug into outlet. The appliance should then function normally. If not, return to an authorized Conair Service Center for evaluation and repair.
LIMITED FOUR-YEAR WARRANTY
(U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your unit free of charge for 48
months from the date of purchase if the appliance is defective in workmanship
or materials. To obtain service under this warranty, return the defective
product to the service center listed on back, together with your purchase
receipt and $5.00 for postage and handling. California residents need only
provide proof of purchase and should call 1-800-3-CONAIR for shipping
instructions. In the absence of a purchase receipt, the warranty period shall
be 48 months from the date of manufacture. ANY IMPLIED WARRANTIES,
OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE 48-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some
states do not allow limitations on how long an implied warranty lasts, so the
above limitations may not apply to you. IN NO EVENT SHALL CONAIR BE LIABLE FOR
ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the
exclusion or limitation of special, incidental, or consequential damages, so
the above limitation may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights, which vary from state to
state.
SUPER STYLING GUIDE
Your best looks begin with a good haircut that’s well maintained. Always treat
hair right with superior quality shampoos, conditioners, and finishing
products.
DRYING BASICS
- Shampoo and condition hair with products of your choice. Rinse thoroughly. Towel-dry hair to remove excess moisture. Using the dryer along with your styling brush, start at a lower setting and direct hot air through a section of hair at a time. Move dryer steadily across each section so that the hot air passes through the hair. Direct airflow at hair, not scalp. Clouds of negatively charged ions will help to reduce static electricity, control frizzy flyaways and contribute to your hair’s shine.
- Keep dryer’s air intake vents unobstructed and free from hair while drying.
- To avoid over-drying, do not concentrate heat on any one section for an extended length of time. Keep dryer moving as you style. For pinpoint airflow, use the snap-on concentrator attachment.
- For quick touch-ups between shampoos, dampen hair with a mist of water before styling with the dryer.
- When using your dryer to create curls and waves, dry hair almost completely on a warmer temperature setting, then finish styling with cold shot feature to quickly close hair shaft and lock in style.
BODY & VOLUME
To create extra volume, turn head upside down while drying. Position the
airflow toward the roots for maximum lift. When hair is dry, toss head back
and brush hair into place.
STRAIGHTENING
Work with hair in sections when creating a super-straight look. Using a large
round brush (approximately 2″ diameter), hold hair taut in each section and
bend ends slightly under as you dry.
MAKING WAVES
Tousled, natural-looking waves are easily created by grasping hair at the
roots and scrunching between fingertips while drying.
USER MAINTENANCE
Your dryer is virtually maintenance-free. No lubrication is needed. For proper
operating performance, the dryer must be kept clean.
When cleaning is needed, unplug the cord, allow to cool and clean dust and
lint from air intake openings with a small brush or the brush attachment of a
vacuum cleaner. The outer surface of the dryer should be wiped clean with a
cloth only.
Please register this product at
www.conair.com/registration
SERVICE CENTER CONAIR CORPORATION
Service Department 7475 N. Glen Harbor Blvd. Glendale, AZ 85307 ©2017 CONAIR
CORPORATIONFor info on any Conair or InfinitiPRO by Conair® product, call
1-800-3-CONAIR or visit us on the web at
www.conair.com/infiniti
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>