SMK-HXV Reader
User’ Manual

2020. 02. 11

Revision History

Synopsis

This document is specifically-written manual for SMK Reader which is receiver and transmitter of wireless communication, which is to confirm user identifications under engine-start limiting function in heavy equipments.
SMK Reader is defined as followings; SMK Reader transmits a signal pattern by RFID 125 KHz in order to wake up Chipkey/Flipkey Tag. And then SMK Reader communicates with Chipkey/Flipkey Tag by 433 MHz wireless signal. SMK Reader decodes password-secured signals and transfer identification information to certification device which has a function of engine-start limiting, such as Cluster, MCU or ECU, with using CAN protocol

Product Image

1. External Appearance
   

2. Dimension
   

3. Certification LABEL location
   

Block Diagram

Specification

1. Operating Specification
   • Must transmit a signal of RFID 125 KHz as a wake up pattern signal.
   • Must be activated from 12 Vdc/24 Vdc external voltage supply.
   • Must be able to analyze the password-secured signal.
   • Must be able to use Single channels with band of 433MHz.

2. Power Specification
   • Rated Voltage: 12V ****(Max 50mA) / 24V (Max 30mA) both available

3. General Specification
   • Storage Temperature: -40ºC ~ 85ºC
   • Operating Temperature: -20ºC ~ 50ºC
   • Water-Proof Specification: IP00
   • Communication with equipment: CAN2.0 250Kbps/500Kbps
   (*It is recommended to use twist shield cable and should be connected through a short distance as possible.)
   • Material of Device: PC (Substance : 3025N1, Flame Class : V0, Manufacturer : SAMYANG)
   • PCB Material object/part No.| manufacturer/ trademark| type/model| technical data| UL No.| mark(s) of
   conformity 1)
   ---|---|---|---|---|---
   SMK READER B/D PCB| JM ELECTRONICS CO LTD| D| V-0 ; 105 °C| E117655| JM

4. RF Specification Item

   ---

Wireless Data Communication
System| Frequency| 433MHz (Single Channels)
RF Power| Under 1 mW
Modulation Method| GFSK
Tested Temperature| -20 – +50″C
Magnetic Induction System| Frequency| 125KHz (Single Channel)
RF Power| Under 105 d131.1v/m 0 3 meter
Modulation Method| ASK
5. Product label Explanation of graphic symbols used
**** Symbol| Description
---|---
| Korea Certification Marking
| Communaute Europeenne Marking
| Electrical waste and electronics equipment
| Federal Communication Commision Marking
| Direct current

Postal address:
Kyungwoo Systech, Inc. Office: +82-2-985-8085

401, Daeryung Post Tower 5, 68, Digital-ro 9, Geumcheon-gu, Seoul, South

Korea
E-mail: [email protected]

FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

RED Compliance Statement
This product is CE marked according to the provision of the RED (2014/53/EU). Hereby Kyungwoo Systech, Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU

www.kyungwoo.com
Copyright © 2014 Kyungwoo Systech Inc.

References

• 경우시스테크

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>