NEXIGO 1588S Enhanced Wall Mount with Controller Charging Dock User Manual

NEXIGO 1588S Enhanced Wall Mount with Controller Charging Dock

PRODUCT INFORMATION

Specifications

• Power Input: DC 5V 3A (Power the charging dock with the provided USB cable)
• Power Output: DC 5V 1A for each charging port
• Charging Time: Fully charge two controllers simultaneously in approximately 3 hours
• Charging Indicators: Orange (Charging), Blue (Fully charged/standby)

Product Overview:

1. Console Wall Mount
2. Controller Charging Dock
3. Controller Charging Indicators
4. Controller Charging Slots
5. USB-C to USB-C Charging Cable
6. Headset Holder
7. Cable Hook

PRODUCT USAGE INSTRUCTIONS

Installation Guide

1. Step 1:
   Locate the installation slot at the bottom of the controller charging dock and attach the controller charging dock to the wall mount. Then affix the controller charging dock to the mount using the provided charging dock connector screw.

2. Step 2:
   Position the console wall mount at an appropriate location on the wall and then locate the screw holes in the wall mount. Use a level (NOT INCLUDED), to make sure that the mount is level on the wall. Mark each hole carefully with a pencil or pen to ensure that the item is mounted in the correct location.

3. Step 3
   Drill a 6mm hole at each mark (Drill and drill bit NOT INCLUDED).

4. Step 4:
   Insert a wall anchor into each hole and hammer in the wall anchors so they are nearly flush with the wall surface (Hammer NOT INCLUDED).

5. Step 6:
   Slide the console wall mount onto the screws, and then slide the items down to ensure they are firmly attached.

6. Step 7:
   Tighten the screws with the screwdriver (not included) to ensure that the console wall mount is firm and secure. The wall mount is ready to use!

7. Step 8:
   Place the PS5 console on the console wall mount and affix the console to the mount using the provided PS5 connector screw.

8. Step 9:
   Insert the USB Type-C connector for the power cable into the power input port of the controller charging dock and insert the other USB Type-C connector into the console.

9. Step 10:
   You can attach the headset holder to the console or console wall mount. Your controller charging dock is now ready to charge your PS5 controllers!

FAQ

• Q: Where can I download the latest manual or watch the installation video?
  A: You can scan the QR code or visit our link at nexigo.com/manuals to download the latest manual or watch the installation video.

• Q: How long does it take to fully charge two controllers simultaneously?
  A: It takes approximately 3 hours to fully charge two controllers simultaneously.

• Q: What do the charging indicators mean?
  A: Orange indicates charging, while blue indicates that the controllers are fully charged or in standby mode.

• Q: Can I charge the PS5 DualSense controller above 80% capacity?
  A: Yes, the PS5 DualSense controller comes with a built-in protective charge limiter. When the unit is charged above 80% capacity and removed from the charger, it will not charge again until it falls back under 80% charge.

WELCOME TO THE NEXIGO FAMILY!

Thank you for choosing the NexiGo Enhanced Wall Mount with Controller Charging Dock for PS5 and PS5 Slim! You are now part of an exclusive club: the NexiGo family! It’s our job to make sure you enjoy your membership. If you have any problems please contact us at cs@nexigo.com at any time for further assistance. This product is covered by our industry leading 1-year manufacturers warranty. Register at nexigo.com/warranty or scan the QR code to get a FREE additional 1-year warranty!
From all of us here at NexiGo, we want to welcome you again to the family. We thank you deeply for your trust and for your business. We know you’ll love it here.
We look forward to serving you again in the near future.
Yours Sincerely,
The NexiGo Team

CONTACT INFORMATION

• Website : www.nexigo.com
• Manufacturer : Nexight INC
• Email : cs@nexigo.com
• Tel : +1(458) 215-6088
• Address : 11075 SW 11th St, Beaverton, OR 97005, US

PRODUCT OVERVIEW

1. Console Wall Mount
2. Controller Charging Dock
3. Controller Charging Indicators
4. Controller Charging Slots
5. USB-C to USB-C Charging Cable
6. Headset Holder
7. Cable Hook

SPECIFICATIONS

• Power Input: DC 5V 3A (Power the charging dock with the provided USB cable).
• Power Output: DC 5V 1A for each charging port.
• Charging Time: Fully charge two controllers simultaneously in approximately 3 hours.
• Charging Indicators:
• Orange: Charging
• Blue: Fully charged/standby

Note: The PS5 DualSense controller comes with a built-in protective charge limiter. When the unit is charged above 80% capacity and removed from the charger, it will not charge again until it falls back under 80% charge.

WHAT’S IN THE BOX?

• Console Wall Mount x1
• Controller Charging Dock x1
• PS5 Connector Screw x1 Charging Cable x1
• Charging Dock Connector Screw x2
• Headset Holder x1
• Screws x6
• Wall Anchors x6
• User Manual x1

INSTALLATION GUIDE

1. Step 1:
   Locate the installation slot at the bottom of the controller charging dock and attach the controller charging dock to the wall mount. Then affix the controller charging dock to the mount using the provided charging dock connector screw as shown below.

2. Step 2:
   Position the console wall mount at an appropriate location on the wall and then locate the screw holes in the wall mount. Use a level (NOT INCLUDED), to make sure that the mount is level on the wall. Mark each hole carefully with a pencil or pen to ensure that the item is mounted in the correct location.

3. Step 3:
   Drill a 6mm hole at each mark (Drill and drill bit NOT INCLUDED).

4. Step 4:
   Insert a wall anchor into each hole and hammer in the wall anchors so they are nearly flush with the wall surface (Hammer NOT INCLUDED).

5. Step 5:
   Insert screws into the wall anchors, but do NOT fully insert the screws into the wall. Leave approximately ¼ to ½ of an inch of the screw sticking out of the wall (Screwdriver NOT INCLUDED).

6. Step 6:
   Slide the console wall mount onto the screws, and then slide the items down to ensure they are firmly attached.

7. Step 7:
   Tighten the screws with the screwdriver(not included) to ensure that the console wall mount is firm and secure. The wall mount is ready to use!

8. Step 8:
   Place the PS5 console on the console wall mount and affix the console to the mount using the provided PS5 connector screw.

9. Step 9:
   Insert the USB Type-C connector for the power cable into the power input port of the controller charging dock and insert the other USB Type-C connector into the console.

10. Step 10:
    You can attach the headset holder to the console or console wall mount as shown below. Your controller charging dock is now ready to charge your PS5 controllers!

NOTES

• SAFETY WARNING: HAZARD-Small Parts-Not intended for children under 5 years of age.
• Power the charging dock with the provided USB cable.
• Other Type-C power supplies may cause charging failure or extended charging duration.
• To ensure the longevity and lifespan of the wall mount do not place any objects other than the console or accessories on the wall mount. Keep this product dry.
• This product cannot be used and/or stored in high humidity conditions.
• When this unit is not in use or when docked controllers are fully charged, it is recommended that you unplug it from the power source.

FCC REQUIREMENT

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

WEEE
CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRONIC EQUIPMENT)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government ffice, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Get in touch with FREE online services.
facebook.com/letsnexigo

Register to get EXTRA ONE YEAR warranty. Only valid in registering within 14 days of product delivery.
nexigo.com/warranty

References

• NexiGo Warranty Registration | NexiGo
• NexiGo | Home Theater Projectors & Video Collaborations

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>