Lexman 84586331 Daily Analogue Programmer Instruction Manual
- June 9, 2024
- lexman
Table of Contents
Lexman 84586331 Daily Analogue Programmer
Limited warranty and liability
LEXMAN guarantee that the product is free from any defect in material and workmanship within five year from the purchase date. This warranty does not apply to damages caused by accident, negligence, misuse, modification, contamination or improper handling. The dealer shall not be entitled to give any other warranty on behalf of LEXMAN. If you need warranty service within the warranty period, please contact your seller directly. LEXMAN will not be responsible for any special, indirect, incidental or subsequent damage or loss caused by using this device. As some countries or regions do not allow limitations on implied warranties and incidental or subsequent damages, the above limitation of lisbility may not apply to you.
Accessories
Open the package box and take out the meter. Please double check whether the following items are missing or damaged
- a ) User manual ………………….. 1pc
- b ) MECHANICAL TIMER ……….. 1pc
If any of the above is missing or damaged, please contact your supplier immediately.
Safety introduction
This product is adapted to control :
lamp, lighting chain, automatic watering system, aquarium, small heater,
coffee machine. Do not use the product if there is any damage or defect on the
product. Do not open or repair the product by yourself but request it to a
professional worker. To clean the product, remove it from the wall socket and
use a soft, dry cloth. Keep the product out of access to the childrens. Do not
put a load to the product over than the maximum indicated. Do not plug a multi
socket on the product output. Plug the product only to a wall socket equipped
with a earth connection. Do not plug this kind of product in series. Avoid
humidity, extreme temperatures, vibrations & shocks. Risk of electrical shock!
do not open the product. No part can be repaired by the user. The product is
power off only when it is unplugged from wall socket.
General specifications
- Minimum setting 15 minutes
- Plug TYPE F-TYPE
- Power 220-240 V~50Hz
- Ampere Max 3500W, 16(2)A
- Working temperature from 0°c to +55°c
- Working humidity from +5% RH to +95% RH non condensing water
- Dimensions 75x115x77.4mm
- Branding Lexman
- Warrantie 5 Years
- Method of mounting controls Plug-in
- Method of providing earthing of control Plug-in
- Type 1 or Type 2 action Type 1
- Additional features of Type 1 or Type 2 actions 1.B.R
- Control pollution degree Pollution degree 2
- Rated impulse voltage 2.5kV
Operating instruction
Set program:
Push down the segments, the attached device should be on during that period of
time. In contrast, pull up the segments, the attached device should be off
during that period of time.(total 96 segments/15 minutes interval, adjustable
for 24hr).
Set the current time:
Turn the entire timer’s dial clockwise until the arrow points to the current
time.
Activate the timer:
To activate the timer’s control ensure that the manual switch is set to the
position. To deactivate the timer’s control, set the manual switch to I
position.The timer’s outlet remains on, just like a normal outlet.
To work:
- Plug the timer into an outlet.
- Plug a device into the timer’s outlet. Turn the device’s switch on for timer’s control.
- Now the device will turn on and off with your programmed settings.
**DISPOSAL
**
Electrical products must not be thrown out with domestic waste. They must be taken to a communal collecting point for environmentally friendly disposal in accordance with local regulations. Contact your local authorities or stockiest for advice on recycling. The packaging material is recyclable. Dispose of the packaging in an environmentally friendly manner and make it available for the recyclable material collection-service
ADEO Services – 135 Rue Sadi Carnot – CS 00001 59790 RONCHIN – France
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>