lyyt 12-24V RGBW DMX Controller 4x8A User Manual
- June 9, 2024
- lyyt
Table of Contents
lyyt 12-24V RGBW DMX Controller 4x8A
Introduction
This DMX decoder is designed to convert the universal standard DMX512/1990 into analogue signal to control either 12V or 24V RGBW LED tape. This model can drive 8A/channel and it simply assigns a colour per DMX channel. DC power input and colour channel outputs are connected via screw terminals. DMX input and through connection are also via screw terminals with the start address set by side mounted DIP switches. Powered by a 12V or 24V power supply, this decoder enables 4 channel DMX control of Red, Green, Blue and White output.
Features
- 4-channel DMX control for RGBW colour mixing
- 256 levels of brightness
- Up to 8A output per channel
- 12V or 24V operation
- Screw terminal DMX input
Specification
| Item | Value |
|---|---|
| Power supply | 12-24Vdc |
| Power max.: | ≤384W/12V ≤768/24V |
| Current consumption | 32A max. |
| DMX channels | 4 |
| Output current | 4 x 8A max. |
| Power connection | Screw terminals |
| Output | Blue, Red, Green, White, V+ |
| Working temperature | -20～50℃ |
| IP rating | IP20 |
| Dimensions | 170 x 30 x 40mm |
| Weight | 92g |
Wiring Diagram
This product is classed as Electrical or Electronic equipment and should not
be disposed with other household or commercial waste at the end of its useful
life. The goods must be disposed of according to your local council
guidelines.
Errors and omissions excepted.
Copyright© 2022 AVSL Group Ltd, Unit 2 Bridgewater Park, Taylor Road, Trafford
Park, Manchester. M41 7JQ.
www.avsl.com