KYUNGWOO SMK-DWS-30 Smart Key Fob User Manual
- June 4, 2024
- KYUNGWOO
Table of Contents
KYUNGWOO SMK-DWS-30 Smart Key Fob
Synopsis
This document is the specifically-written manual for the receiver and transmitter (SMART KEY FOB) of wireless communication, which is to confirm user identifications under the engine-start limiting function in heavy equipment. SMART KEY FOB is defined as follows: it receives signals with RFID 133 KHz and wakes up. After then, it transmits password-secured information to SMART KEY CONTROLLER by using 433.92MHz Wireless signals.
WARNING
Exchanging batteries in an incorrect way, It may cause an explosion Discard
used batteries according to the manufacturer’s instructions
Product Image
External Appearance
Certification LABEL location
Block Diagram
Specification
Operating Specification
Must wake up the remote control by providing electricity with RFID 133 KHz.
- Must be operating with a CR2032 battery.
- Must be able to transfer password-secured signals.
- Must be able to use Single channels band of 433.92MHz.
Power Specification
3V d.c. (CR 2032 Lithium Battery)
Notice :
Inserting opposite polarity of the battery may cause an explosion or damage
to the product (Please match battery polarity with battery holder)
General Specification
Storage Temperature: -30 C 80’C
- Operating Temperature:-200 60′
- Wireless Tested Temperature: -20C 60’C
- Water-Proof Specification: IP54 (Living Water-Proof)
- Material of Device: PC (Material: 1220, Flame Class: V2, Manufacturer: Lotte Chemical)
- PC&ABS (Substance LUPOY GN-5001RF BLACK, Flame Class VO,
- Manufacturer: LG CHEMICAL)
- TPE (Material: TC5MGA-$340)
- ZNP (Materia: öt301 DC2, Manufacturer : 95)
PCB Material
object/part No.| manufactur r/ trademark| Layer
/T h ickness
| Flame Class| standard| mark(s) of conformity1)
---|---|---|---|---|---
SMK TAG B/D PCB| JM ELECTRONI S CO LTD| 2Layer /0.8T|
V-0
| UL 796|
RF Specification
Item| Specification|
---|---|---
Wireless Data Communication System
| Frequency| 433.92MHz (Single Channel)
RF Power| Under 1 mW|
Modulation Method| GFSK
Tested Temperature| -20℃ ~ +60℃
Magnetic Induction System
| Frequency| 133KHz (Single Channel)
RF Power| Receive O ly
Modulation Method| ASK
Product label Explanation of graphic svmbols used
Postal address:
Kyungwoo Systech Inc. Office: +82-2-985-8085
401, Daeryung Post Tower 5, 68, Digital-ro 9, Geumcheon-gu, Seoul, South
Korea E-mail: Webmaster@kyungwoo.com
This equipment is not suitable for use in locations where children are likely to be present.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RED Compliance Statement
This product is CE marked according to the provision of the RED (2014/53/EU).
Hereby Kyungwoo SystechInc. declares that this product is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU
References
- Web hosting, domain name registration and web services by 1&1 Internet
- WooCommerce - Sell Online With The eCommerce Platform for WordPress
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>