iVOOMi CHEETAH 300 USB 2.0 Wireless Adapter User Manual
- June 6, 2024
- iVOOMi
Table of Contents
CHEETAH 300
USB 2.0 WIRELESS ADAPTER
802.11b/g/n Wireless USB Adapter V0.1
User Manual & Installation Guide
This manual is divided into three parts: Windows XP, Windows 7 / 8 / 8.1 /10, and Mac
Windows XP
Please do the following steps to set up the soare on your computer:
Step 1. Once the wireless USB adapter has been plugged in to a USB port,
the following message will appear on screen. Click “Cancel”. (See picture
below please)
(If it does not pop-up, skip this step)
Step 2. Please insert the disc into your CD-ROM drive. The disc should
auto start, displaying the following window. If it does not start due to the
system segs, open My Computer, find the Setup.exe file in the folder “windows”
in your CD-ROM directory.
If you do not have a CD-ROM Drive, you can download at
netdynwifi.com
Step 3. Double click the “Setup.exe” file and the soware will inialize.
Then please choose “I accept the terms of the license agreement” and click
“Next”.
Here you have two opons: “Install Driver and Mediatek WLAN Ulity” or “Install
Driver Only”
With the WLAN Ulity you will have soare to manage your connecwith. If you
choose to only install the drivers, you will use your regular ulity provided
by Windows.
Step 4. Once you choose which opn you prefer, connue the installaon
wizard and finish it.
Step 5:
If You Chose “Install Driver Only”:
Step 5a. Click the icon in the Windows system tray, which is located in the
boom-right corner of your computer screen. It pops up a message and double-
clicks the ulity icon (or choose the SSID and click “connect”), enter the
wireless network key and click “connect”. Then you will have internet access.
If You Chose “Install Driver and Mediatek WLAN Ulity”:
Now Choose between the “Mediatek Configura Tool” or the
“Microso Zero ConfiguraTool”. If you choose the “Mediatek Configuratool, proceed
with Step 5b. If you choose the “Microso Zero Configuraon Tool”, you have the
opn to connect to the internet both ways 5a and 5b.
Step 5b. Double click the Icon in the Windows system tray, which locates
in the boom-right corner of your computer screen and open the wireless
networking setup page as seen in figure 1. Click “Available Networks” and
choose the wireless networking you prefer on the right bar.
Double click wireless signal to open a page and click the ( ) next step buon.
Enter the wireless networking key as seen in figure 5 and click the
next step ( ) buon. Now you will be able to connect to the internet.
Windows 7 / 8 / 8.1 / 10
This example uses Windows 7, but if you have Win 8 or 10, the steps are the
same.
Step 1. Once the wireless USB adapter is plugged into a USB port, insert
the CD and locate Setup.exe in the folder “windows” in the disc directory. (If
you do not have a CD-ROM slot in your computer, please download the driver
from netdynwifi.com)
Step 2.
Double click on the Setup.exe file, then choose “I accept the terms of the
license agreement”. Click “Next”.
Here you have two
opons: “Install Driver and Mediatek WLAN Ulity” or “Install Driver Only”
With the WLAN Ulity you will have soare to manage your connect with. If you
choose to only install the drivers, you will use your regular ulity provided
by Windows.
Step 3. Once you choose which opn you prefer, connue the installaon
wizard and finish it.
Step 4:
If You Chose “Install Driver Only”:
Step 4a. Click on the Icon ** in the Windows system tray, which is
located in the boom-right corner of your computer screen and then double click
the SSID you preferred (or click “connect” buon)
Open the
wireless networking page and enter the security key. Click the “OK” button.
Then you should have internet access when you open a internet window with any
browser.
If You Chose “Install Driver and Mediatek WLAN Ulity”:
Step 4b.** Double click the icon in the Windows system tray, which is
located in the boom-right hand corner of your computer screen, and click on
the “Available Networks” buon (See figure 1). Open the right wireless list and
choose wireless signal (See figure 2) and double click.
Click “Next “ (figure 4) at the leboom of the page.
Enter the
wireless password (figure5) and click the next arrow. You will now have
internet access.
Note: If there is no icon, please find it by clicking
the small triangle at the boom right of the screen. It has been hidden as
following the picture shows:
If you install the Mediatek WLAN Ulity, you can also choose to do step 4a and
you will be able to access the internet.
MAC OSX
Step 1. Unzip the Driver for MAC OS, and then open the file “USBWireless-
Install.pkg”. Open the .pkg file for the Mediatek Wireless Uy installaon.
 Step 2. Aer
you install the driver, you’ll have to restart your computer.
Step 3. Open your Finder, and then click on “Applicas”, find the “Mediatek
Wireless Ulity” files. Open it and click “Wireless Ulity”.
Step 4.
In the taskbar at the top you will now see a yellow icon (See below, on older
versions of Mac, the Icon might say “Ralink” in blue font). Click this icon
and click “Open Wireless Ulity…”
Step. 5
Choose your WiFi, and click “CONNECT”, type your password and you can get
access to the Internet.
www.ivoomi.co
iVoomi Innovation Pvt. Ltd.
Regd. Office: QU-276, A Block, Chitrakoot Apartment, Pitam Pura, Delhi
Customer Care : +91 9335828282 | Email :
customercare@ivoomi.co
Website : www.ivoomi.co
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>