iVOOMi IV-L1902VG 15.1-Inch LED Monitor User Manual
- June 6, 2024
- iVOOMi
Table of Contents
- iVOOMi IV-L1902VG 15.1-Inch LED Monitor User Manual
- Safety
- Cleaning
- Electricity and Safety
- Installation
- Operation
- Unpacking
- Installation
- Users controls
- Display Data Channel (DOC)
- Troubleshooting
- Specification
- Proper Posture
- Question & Answer
- Terminology
- Warranty Terms & Conditions
- Warranty Card
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
iVOOMi IV-L1902VG 15.1-Inch LED Monitor User Manual
IV-L 1902VG
Please read the user manual for correct & complete usage of the device.
For technical support, services, user guides, and other information, please visit https://www.ivoomi.co/support, or simply scan the QR code.
If you have any suggestions or needs on the product guides, you are welcome to email customercare@ivoomi.co
NOTE:
The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Safety
National Conventions
The following subsections describe notational conventions used in this
document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and
printed in bold type or in italic type. These blocks are notes, cautions, and
warnings, and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your computer system.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority.
Cleaning
- Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
- Take the following steps when cleaning.
- The following images are for reference only. Real-life situations may differ from what is shown in the images.
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is shown in the images.
WARNING
Installation
WARNING
Operation
Unpacking
Please check that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future.
Installation
To install the monitor on your host system, please follow the steps below:
Steps
-
Connect the video cable
a Make sure both the monitor and computer are switched off.
b Connect the VGA video cable to the computer.
c Connect the digital cable
(1) Make sure both the monitor and computer are switched off.
(2) DVI Cable (Optional, only Dual-Input Model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the DVI cable to the computer.
(3) HDMI Cable (Optional, only HDMl-lnput Model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer. -
Connect the power
Connect the AC cord to the Monitor AC outlet -
Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very important. -
If the monitor does not function properly, please refer to the troubleshooting
section to diagnose the problem.
Screen position adjustment
To optimize the viewing position, you can adjust the monitor tilt, using both
of your hands to hold the edges of the monitor. The monitor can be adjusted to
15 degrees up or 5 degrees down.
Connecting the AC Power cord
-
Check first to make sure that the power cord you use is the correct type required for your area.
-
The monitor has a universal power supply that allows operation in either 100/120 V
AC or 220/240 V AC voltage area. No user-adjustment is required. -
Plug one end of the AC Power cord into an AC outlet.
-
For units using 120 V AC:
Use a UL-listed cord set, type SVTwire and plug rated 10 A/125 V. -
For units using 220/240 V AC:
Use a cord set consisting of HOSW-F cord and plug rated 10 A/250 V. The cord set should have the appropriate safety approvals for the country in which the equipment will be installed.
Power saving
The monitor will be switched to “power saving” mode by the control signal from
the display controller, as indicated by the blinking blue light.
Users controls
Panel controls
Display Data Channel (DOC)
To make installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol through which the monitor automatically informs the host system about its capabilities; for example, supported resolutions and corresponding timing. The monitor supports the DDC2B standard .
Connector pin assignment
15-pin color display signal cable
Troubleshooting
Before sending your LED monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem.
VGA Mode
Specification
General Specification
Note : The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance .
Proper Posture
Proper Posture When Using a Monitor
Adjust the screen so that you can comfortably look at it at a slight downward
angle from your natural eye level.
- Take a break for approximately 10 minutes every hour to reduce any fatigue caused by long-time usage.
- The stand of the touch monitor allows the product to be used in the optimum position. Adjust the stand angle from -5° to 15° to obtain the best view of the screen.
Question & Answer
Refer to the user manual for your PC or graphics card for further instructions on adjustment.
Terminology
OSD (On Screen Display) : On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen.
Dot Pitch : The product and screen consist of red, green and blue dots. A shorter distance between the dots produces a higher resolution. Dot pitch refers to the distance between the shortest distance between dots of the same color. Dot pitch is measured in millimeters.
Plug & Play : The Plug & Play feature allows the automatic exchange of information between a monitor and PC to produce an optimum display environment. The monitor uses VESA DDC (international standard) to execute Plug & Play.
HUB : HUB refers to a device that is a common connection point for multiple devices connected over a network. It is used to connect multiple PCs, video devices, office devices and/or LANs over a single network.
Horizontal Frequency : Characters or images displayed on the monitor screen consist of numerous dots (pixels). Pixels are transmitted in horizontal lines, which are then arranged vertically to create an image. The horizontal frequency is measured in kHz and represents how many times horizontal lines per second are transmitted and displayed on the monitor screen. A horizontal frequency of 85 means that the horizontal lines that make up an image are transmitted 85000 times per second. The horizontal frequency is indicated in 85kHz.
Grey scale : Scale refers to levels of color intensity that show variations of color change from darker areas to brighter areas on the screen. Changes to the screen brightness are expressed with black and white variation, and grey scale refers to the medium area between black and white. Changing the grey scale through Gamma adjustment will change the medium brightness on the screen.
Vertical Frequency : One image is made of numerous horizontal lines. The vertical frequency is measured in Hz and represents how many images can be created per second by those horizontal lines. A vertical frequency of 60 means that an image is transmitted 60 times per second. The vertical frequency is also called “refresh rate” and affects screen flicker.
Scanning rate: Scanning rate, or refresh rate, refers to the frequency of screen refreshes. Screen data is transmitted as it refreshes to display an image, although the refreshing is invisible to the naked eye. The number of screen refreshes is called scanning rate and is measured in Hz. A scanning rate of 60Hz means that the screen refreshes 60 times per second. The screen scanning rate depends on the performance of the graphics cards i n your PC and monitor.
Resolution : Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time.
E.g. A resolution of 1920 x 1080 consists of 1920 horizontal pixels (horizontal resolution) and 1080 vertical lines (vertical resolution).
Warranty Terms & Conditions
We thank you for purchasing iVOOMi Product. All iVOOMi products are designed and manufactured to deliver highest quality performance for comfort and convenience to the customers.
In the event of your product requiring service, please contact on iVOOMi customer care helpline no. 9335828282 for assistance.
iVOOMi Innovation Pvt. Ltd. warrantees to the original first retail buyer that the product to be free from material, design and workmanship defects for a period of 12 Months from the date of purchase under normal use in accordance with the operating instructions. iVOOMi through its authorized service franchise will repair the product free of cost subject to the terms and conditions as below
-
Customer has to send the faulty product on the freight paid basis to any iVOOMi authorized service centre for warranty services. The cost of transportation of product to and from service centre has to be borne by the customer.
-
This warranty will be valid only if completely filled warranty card with stamp and sign of iVOOMi dealer & customer and original purchase invoice is presented together for service.
-
iVOOMi reserves the right to decline warranty services if documents (as mentioned in point No. 2) are not presented or the information contained on the documents are altered or tampered or incomplete.
-
This warranty will not cover any damages arising out of unauthorized alterations to the product or opening of the product and/or service by unauthorized person.
-
This limited warranty does not cover any losses or damages that occur as a result of:
• Shipping or improper installation or maintenance
• Misuse or Neglect
• Any cause other than ordinary commercial or industrial application
Adjustment by non-authorized source Repair, modification, or installation of options or parts by anyone other than an Authorized Service Center
• Excessive or inadequate heating or air conditioning or electrical power failures, surges, or other -
Any defective part .r:eolaced under warranty by iVOOMi authorized service centre will be under warranty coverage 1rregu1ant1es for the remain mg period of original warranty of the product.
-
This warranty does not cover damages to the product caused due to normal wear and tear, improper installation, incompatible voltage/frequency supply, accident, lightening, fire or acts of God, excessive shock, dropping or any other external cause beyond iVOOMi’s control.
-
This product is intended to be used for normal domestic and personal use only. Warranty will become void if product is used for commercial, industrial or rental applications.
-
This warranty does not cover any collateral or consequential loss that may happen due to defect or damage to the product or intermitted time required in providing warranty services.
-
iVOOMi reserves the right to replace the defective part with an equivalent or reconditioned part. In case of nonavailability of any specific spare part, iVOOMi may replace the defective part with any other compatible spare part with similar functionality. There will be no compensation given if the cost of such spare part is less than the defective part replaced.
-
In the event of any deficiency in providing warranty services, notwithstanding the nature of defect or any consequential loss, the seller’s and iVOOMi’s joint liability will be limited maximum to the purchase price paid by the customer on pro rats basis of the balance warranty period.
-
This warranty shall neither affect customer’s statutory rights under applicable Indian Laws, nor the consumer’s rights against the dealer arising from their sale of the product. All disputes will be subject to Delhi jurisdiction only.
-
In all case the iVOOMi warranty shall not exceed beyond 24 months of manufacturing date of the product.
Warranty Card
I have read and understood the terms and conditions of warranty and agree to abide by the same.
Customer Sign Dealer Stamp & Sign
iVOOMi Customer Care:
Contact No.: +91-9335828282
Email: customercare@ivoomi.co
Marketed & Supported by: iVOOMi Innovation Pvt. Ltd.
Registered Office : 276A, Block-QU, Chitrakoot Apartment, Pitampura,
Delhi – 110034 (India)
Customer Care No.: +91-9335828282 I Email:
customercare@ivoomi.co
facebook.com/ivoomi
instagram.com/ivoomi.co
linkedin.com/company/ivoomiindia
youtube.com/channelfrvoomiindia
All rights reserved. iVOOMi is registered trademark of iVOOMi Innovation Pvt. Ltd.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>