Temtop LED Floor Lamp Instructions
- June 6, 2024
- Temtop
Table of Contents
LED FLOOR LAMP
INSTRUCTION
Email:
feifu.wang@temtop.com
UNIT:CM
Weight(4.2KG)
| 1 | Indicator light | |
|---|---|---|
| 2 | Night light Timed 1 hour function | |
| 3 | 6000K | |
| 4 | Brightness Waning | |
| 5 | 3000K | |
| 6 | Leisure Mode | |
| 7 | Breastfeeding Mode | |
| 8 | Turn on / off | |
| 9 | 4000K | |
| 10 | Brightness Enhancement | |
| 11 | Reading Mode | |
| 12 | Office Mode | |
| 13 | Entertainment Mode |
NOTICE:
This remote cotroller does not pack batteries,please put 2×1.5v batteries
into it before use.
OPERATING INSTRUCTIONS
Thank you for your purchase! Before installing the product, please read this instruction carefully and keep it for further reference.
SPECIFICATION
| Name | LED floor lamp |
|---|---|
| Material | Metal + Acrylic |
| Color | Matt Black |
| Wattage | 15 W |
| Luminous Flux | 800 LM |
| Dimmable | Yes (5%-100% dimming) |
| Color Temperature | 3000 Kelvin – 6000 Kelvin |
| Lifespan | 30,000 Hrs |
| Adapter Voltage | DC24V 0.75A |
| Input Voltage | AC100-240V 50/60Hz |
| Protection class | IP20 |
HOW TO USE
A Press on, then press off
B Color temperature: the first stage is 3000K, the second stage is 4500K,
the third stage is 6000K, Long press is an electroless dimmer
NOTICES
- Read the instructions before using the lamp.
- Avoid damp, high temperature or corrosive environments to ensure long life.
- Check whether there is any shipping damage after receiving the packaged lamp. Report any issues to us directly at feifu.wang@temtop.com.
- Do not disassemble or repair the lamp if you are not qualified to do so by your local regulations.
- Do not use frayed appliances or damaged cables.
- Do not touch electrical appliances with wet hands and keep it away from fluids.
- Only use the included power adapter.
- Please turn off the power when the device is not used.
- Only clean with dry cloth, no solvents or cleaning solutions.
- Do not use if exceed the voltage.
- Dispose of all packaging correctly and responsibly in accordance with local regulations. Do not keep packaging parts that may be a source of danger within the reach of children.
- Please ensure that all the accessories are assembled according to the assembly instructions. After connecting the driver to the wires, the whole lamp can be used normally.
WARRANTY
Warranty is provided by the seller of this device please contact your reseller for more information regarding the local warranty regulations.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
class B digital device,pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequence energy and,if
not installed and used in accordance with the instructions,may cause harmful
interference to radio communications.However,there is no guarantee that
interference will not occur in a particular installation.if this equipmemt
does cause harmful interference to radio or television reception,which can be
determined by turning the equipment off and on,the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an autlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help