Temtop M10i WiFi Air Quality Monitor Meter User Guide
- June 5, 2024
- Temtop
Table of Contents
Temtop M10i WiFi Air Quality Monitor Meter
Add Device
Before you begin:
- Charge the MlOi if battery is low.
- Press home button for 3 seconds to turn on the MlOi.
- Download and open Temtop app, register and login.
- Connect your mobile phone to your preferred Wi-Fi.
a. On the home page of Temtop app, click the + sign on top right to start adding the device.
b. Click :-:: to scan the QR code or enter the 20-digit GUID from the device, enter your preferred device name. Then click Next.
c. Once added, a reminder window will pop up as shown below, please click
OK to enter reminder page, read carefully, and click Next to enter Wi-Fi
configuration page.
Note: If the window didn’t pop up, please check if you have already added this
device to your other account before. Otherwise, please contact us.
Connect Wi-Fi
MlOi requires an active Wi-Fi connection to work with Temtop app for further
management.
If you wish to set/change/update Wi-Fi, please refer to the following steps:
a. If your mobile phone has already connected with Wi-Fi, please ignore
this step. Or otherwise, please connect your mobile phone to your preferred
Wi-Fi and prepare the Wi-Fi password for further uses.
b. Please use a pin or stick to press and hold the calibration button for
2 seconds to enter WLAN configuration mode. The wireless icon on the screen of
MlO will flash ascendingly under this mode.
Note: Please see 3. Network Status Instruction for more details of the
status of wireless icon.
c. Return to the Wi-Fi configuration page on Temtop app; Or repeat l. Add
Device if this page was not shown on the app.
d. The Wi-Fi name should auto fill on the configuration page, then enter
its Wi-Fi password and click Next.
e. Wait until the screen of MlOi shows a solid Wi-Fi icon, which means
the Wi-Fi has connected successfully. If it fails, please check if Wi-Fi you
used in step a and d are the same.
Network Status Instruction
- Not Connected: The wireless icon will flash on the screen.
- Connected: The wireless icon become solid and display as the current signal strength.
- WLAN Configuration Mode: The wireless icon will flash ascendingly on the screen.
Get the Temtop App
Please search Temtop on App Store or Google Play, Or simply scan the QR code
below to download the app:
