SuperHydro W92H H2 Show Intelligent Electric Kettle User Manual

SuperHydro W92H H2 Show Intelligent Electric Kettle

User’s Manual

Product Structure

Package List

H2 Show Hydrogenate Bottle

First time Use

1. Remove all packaging, labels and accessories from inside and outside the kettle.
2. The first 2-3 times of boiling water should be poured out to clean the inside of the pot body. After the pot body is cooled down. wipe the outside of the pot body with a damp cloth. (Please note that the base and the electrical connectors on the plug should not touch the water.)

Operating Procedures

1. Open the lid.
   Pull up to remove the lid

2. Remove the cover and clean the inside of the kettle

3. Please Just use it to boll water.
   “Do not odd milk. soy milk, fruit juice, etc.. it will cause problems such as paste bottom and broken down.

4.   Add appropriate amount of water.

   •  Do not add water beyond the maximum water level line or below the minimum water level line.
   • If the water exceeds the maximum water line, it will cause a boiling overflow.

5. “Put the lid on the pot as shown in the picture, and press gently to make sure the lid is tight
   If the lid of the pot is not properly covered. it will easily fall off when pouring water and make you get burned by boiled water.

6. lnsert the plug of the power cord into an outlet.

7. Place the electric kettle on the base and turn it on.

Interface Operation

1. Power on.
2. Standby mode.
3. Touch any screen button to display the screen.
4. Touch the TEMP screen to set temperature.
5. Touch the TIME screen to set holding time.
6. Touch the ON/C screen to start the machine and start heating(eg. Set 2oo°F Coffee heating to keep warm tor 12 hours)
7. The keep-worm mode is activated when the set temperature is reached
8. End keep-warm mode.
9. Standby mode.

Tips
(Brewing different products at different temperature)

Cleaning and Maintenance

Cleaning of electric kettle

1. Unplug the power plug.

2. .After the kettle is cooled down, clean the inside of the kettle with a damp sponge.
   Note: Do not immerse the kettle body, the power cord or the plug in water (the electrical connectors at the bottom of the kettle MUST NOT touch water).

3. Please clean it in time after making tea or coffee, etc.

Coated heating plate cleaning
When the coated heating plate is used for a long time, spots will appear. This is scale, which is a normal phenomenon. It can be gently scrubbed with a scouring pad. *Avoid damaging the coating and avoid scratching by sharp objects.

Descaling Tips

use vinegar:

1. Add about 100ml vinegar to the kettle.
2. Add about 200ml of water to the electric kettle, start boiling water at 212°F
3. After the program is over, leave it stay still and wait for 1 hour, then wipe with a scouring pad.

To use citric acid :

1. Add about 200ml of water to the kettle. 2.Add 10g citric acid, start boiling water 212°F mode.
2. Wait for 5-10 minutes after automatic power off (If there is a lot of scale, the waiting time can be extended).
3. At last, pour out the water in the kettle and wipe it with a scouring pad.

Precautions for safe use

1. Before use, please check if the power supply used is consistent with the regulations of this product. The power socket used must have good grounding protection, and do not share a power socket with high-power electrical appliances.
2. When the product is in use, do not let the power cord come into contact with sharp-edged objects, and do not get close to high-temperature objects to prevent danger or damage.
3. lt is norm a I for the kettle body to become hot during product use. When pouring water, please only hold the handle to pour out the water. Do not touch the kettle body with your hands or any part of your body to avoid high temperature burns.
4. When in use, the water in the kettle should not be above the maximum water level line so that the water will not spray out from the top end of the kettle when boiling and cause on accident.
5. The kettle body must be used with the same type of power supply chassis.
6. When using, it should be placed on a stable level to work.
7. Avoid operation or approach of children during use to avoid accidents.
8. When the work is over, please unplug the power cord. Plug it in again when start using it next time.
9. During work, ii any problem occurs, please unplug the power plug from the socket first.
10.  lf the power cord is damaged, stop using the product immediately to avoid danger.
11. Do not use other extended power cords unless It has been tested by professionals.
12.  The high borosilicate glass material is fragile, and damage is not covered by the warranty.
    • Note : During use, if the water boils dry, it will automatically enter the anti-dry-burning mode and stop working automatically. At this time. you need to unplug the power plug, then add an appropriate amount of cold water, and then you can use it normally offer the temperature of the heating plate drops.
    • Hydrogen content test:
      For the first time of hydrogen production, at least 5 drops of hydrogen content detection solution can be added to the certain testing container to test hydrogen; after about 15 minutes of continuous hydrogen production, 10-15 drops of hydrogen content detection solution con be added to the certain testing container to test hydrogen.

Product Specifications

This product comes into contact with food materials

Part name Heating plate| Material

304 stainless steel

Lid

Self-tapping screws

| 304 stainless steel

304 stainless steel

Glass body| High borosilicate glass

• SuperHydro H2 show
  Quick Start Guide

• Intelligent Electric Hydrogen Water Kettle  please turn the page

Frequently Asked Questions

1. How many temperature modes are available for the kettle?
   7 modes, they are H2-Hydrogen-Rich Water, 160°F-Delicate Tea/Lemonade, 175°F-Green Tea/Yellow Tea, 185°F-White Tea/Oatmeal, 190°F-Oolong Tea/ Espresso, 200°F-French Style Coffee, 212°F-Black Tea/Instant Ramen.

2. How long can the holding time be set?
   There also have 6 modes for holding time: 30mins, 1 hour, 2 hours, 4 hours, 8 hours and 12 hours.

3. Can it be used directly without setting the temperature and holding time?
   Yes, our kettle has memory function. When you touch any area on the screen, after all the buttons light up, then press the ON/C button and the kettle can start working directly according to the last working mode without additional setting temperature and time.

4. How to start the machine correctly?
   Please take note that everytime when in use, you should set the holding time first then press the ON/C button to start work. 212°F cannot be set holding.

5. Can this electric kettle be used to make tea, coffee or heat milk?
   H, Show kettle can only be used to boil water. Please DO NOT add tea, coffee, milk, soymilk, fruit juice or any other beverage to heat up. Please take note that the beverage mentioned above will cause paste bottom or break down of the machine.

6. Can the temperature and time be adjusted when the kettle is working?
   No. To avoid accidental touching, the temperature and time adjustment buttonsare locked when the kettle is working. You need to press the ON/C button to exit the heating mode, then you can set the temperature and time.

•  Heating without insulation mode(eg.160°F Delicate Tea Keeping warm 00:00)
  Red font shown below represents adjusted data (note: all numbers on real display are white)c

1. Standby mode.
2. Touch any button (exit standby mode).
3. Touch the TEMP button to adjust the set temperature.
4. . Touch ON/C button (start heating).
5. 5End of heating.
6. Standby mode.

Heating with insulation mode (eg.200°F French Press Coffee Keeping warm 12:00)

1. Standby mode.
2. Touch any button (exit standby mode).
3. ouch the TEMP button to set the temperature.
4. Touch the WARM button to set the holding time.
5. Touch ON/C button 6.End of heating. (start heating).
6. End of holding time.
7. standby mode

Memory Mode (eg. Last setting: 200°F French Press Coffee Keeping warm 12:00)

1. Standby mode.
2. Touch any button (exit standby mode).
3. Touch ON/C button (start heating).
4. End of heating.
5. End of holding time.
6. Standby mode.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>