FIRE CAM BJ800 Helmet Camera User Manual
- June 4, 2024
- FIRE CAM
Table of Contents
FIRE CAM BJ800 Helmet Camera
Features
- CREE XPL LED
- Brightness output up to 800 lumen
- Integrated “Precision Digital Optics Technology” provides extreme reflector performance
- 18650 2600mAh Lithium Battery with protection circuit
- External USB Charging Cradle for 18650 battery
- Precision machined aluminum alloy with hard anodized in black finishing
- Reverse Polarity protection prevents damage from incorrectly inserted batteries
- Can use 2*CR123 Lithium dry cell battery
- IPX7 Rated
- High/Mid/Low/SOS/Off Mode
- 1.5M Drop Resistance
Dimensions
- Length: 138mm
- Bezel Diameter: 32mm
- Body Diameter: 25.4mm
Accessories
- External Charging Cradle
- 1 m USB Cable
Battery
- 18650 Lithium rechargeable battery / 2*CR123A Lithium Dry Cell Battery
Output & Run Time
- 18650: High 2.5 hours/Mid 3.5 hours/Low 8 hours
Operating Instructions
Battery Installation
Unscrew end cap and remove cardboard terminal protector if in place and
discard.
To Switch On: Press the button at the end cap to power on to High beam,
press twice for Mid power, press twice again for Low power, twice again for
SOS, twice again for Strobe and once for Off mode.
Warning:
- Ensure the batteries are inserted with the positive ends pointing to the head. The BJ800 will not be operational with incorrectly inserted batteries. Fully charge before first use.
- When the BJ800 is left unused for extended periods of time, we recommend all batteries are removed to prevent accidental activation of the flashlight or battery leakage.
Charging Function
The BJ800 flashlight is capable of charging one 18650 Lithium battery with the
included USB charging cable. Unscrew the Charging cover at the neck of the
flashlight until the charging port appears. Connect the charging cable to the
BJ800 charging port and a power source (USB chargers, PC or other power
terminals). Press the power button for red indicator light to come on next to
the charging port. Under normal charging conditions, the red indicator light
will illuminate steadily to notify users. When charging is complete, the BJ800
will terminate the charging process automatically and green power indicator
goes on. Make sure to retighten the Charging cover for a waterproof seal.
External Charging Cradle
The external charging cradle is capable of charging one 18650 Lithium battery. Insert the battery onto the charging port in right direction. Put the positive side of battery onto the right end of the cradle. Carefully insert the USB cable into port. Red indicator light will be illuminated steadily to notify users. The green indicator light will be on when it fully charged. Fully charging one depleted 18650 battery takes approx. 4 hours.
Charging/Charging Battery
Batteries should be recharged or replaced when any of the following occurs. The output appears to be dim or the flashlight becomes unresponsive. High beam will not stay on when battery is low on charge, other modes will still operate until battery is discharged.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>